Shipbuilding-Gas water separator
Overview of gas water separator / marine gas water separator
product:
Overview of gas water separator / marine gas water separator
product:
This air water separator is suitable for compressed air piping
system with medium as air.
Standard for performance of gas water separator / marine gas water
separator:
People's Republic of China shipbuilding industry standard:
CB/T3572-1994 gas water separator
II. Foreign trade standard: CBM1034-81 marine gas water separator
Gas water separator / marine gas water separator basic form:
A type flange size press GB569 gas water separator / marine gas
water separator
AS type flange size press GB2501 gas water separator / marine gas
water separator
B type flange size press GB569 automatic gas water separator /
marine gas water separator
BS type flange size press GB2501 automatic gas water separator /
marine gas water separator
Marine air water separator / marine automatic drainage gas water
separator structure form:
A, AS type marine gas water separator (DN20-DN50):
B, BS type marine automatic drainage gas water separator
(DN20-DN80):
CBM1034-81 marine gas water separator (daily standard flange):
Air water separator / marine gas water separator, custom material
selection:
Generally speaking, if there is no special requirement, normal
production is as follows:
In order to enhance the corrosion resistance, the marine gas water
separator can be manufactured with the following materials:
SUS304 stainless steel gas water separator / marine stainless steel
gas water separator CB/T3572-94 (DN20-DN80)
SUS316 stainless steel gas water separator / marine stainless steel
gas water separator CB/T3572-94 (DN20-DN80)
SUS316L stainless steel gas water separator / marine stainless
steel gas water separator CB/T3572-94 (DN20-DN80)
Gas water separator / marine gas water separator technical
agreement:
1. the joint size of all gas water separators shall comply with the
requirements of CB*56.
2. the flange dimensions and sealing surfaces of all marine
separators shall comply with the requirements of GB569/GB2501.
3. marine gas water separator shall be marked with medium flow
direction
4. after the gas water separator body is welded, the annealing
treatment shall be carried out
5. the surface of marine gas water separator shall be galvanized,
and the average thickness of zinc layer shall be no less than 30 mu
m
Test method for gas water separator / marine gas water separator:
1. marine gas water separator should be carried out after the
completion of the hydraulic strength test with 4.5Mpa, the ambient
temperature is not lower than 5 DEG C, the pressure regulator in 5
minutes, and then reduced to working pressure to check again in the
course of the experiment, no leakage and sweating phenomenon.
2. marine gas water separator in strength test qualified,
assembled, should be airtight experiment, the experimental pressure
is equal to the pressure of work, the experimental method is the
separator in water or in the weld joints and coated with soap and
water, any leakage is not allowed in 5 minutes.
3. marine automatic drainage separator shall be able to work stably
at 16 degrees of inclination
4. the utility experiment of the marine gas water separator, under
the 5.3 specified conditions, water injection from the inlet of the
gas water separator and stopping water injection when the drain
valve is drained, is carried out 5 times continuously
The gas water separator / marine gas water separator is usually
marked as:
A, AS type gas water separator, /A, AS type marine gas water
separator
Gas water separator A30040, CB/T3572-94/, marine gas water
separator, AS30040, CB/T3572-94
(nominal pressure is 3.0Mpa, nominal diameter is DN40)
Marine gas water separator AS30025 CB/T3572-94/ marine gas water
separator A30025
(nominal pressure is 3.0Mpa, nominal diameter is DN40)
Gas water separator A30032, CB/T3572-94/, marine gas water
separator, AS30032, CB/T3572-94
(nominal pressure is 3.0Mpa, nominal diameter is DN40)
Gas water separator A30040, CB/T3572-94/, marine gas water
separator, A30040, CB/T3572-94
(nominal pressure is 3.0Mpa, nominal diameter is DN40)
Air water separator, A30050, CB/T3572-94/, marine gas water
separator, AS30050
(nominal pressure is 3.0Mpa, nominal diameter is DN50)
B, BS type automatic drainage gas water separator, /B, BS type
marine automatic drainage gas water separator
Gas water separator BS30040, CB/T3572-94/, marine gas water
separator, B30040, CB/T3572-94
(nominal pressure is 3.0Mpa, nominal diameter is DN40)
Marine gas water separator B30065 CB/T3572-94/ marine gas water
separator BS30065
(nominal pressure is 3.0Mpa, nominal diameter is DN40)
Gas water separator B30080, CB/T3572-94/, marine gas water
separator, B30080, CB/T3572-94
(nominal pressure is 3.0Mpa, nominal diameter is DN40)
Dg40 Pg30 gas water separator: gas water separator 40 CBM1034-81
Dg50 Pg30 gas water separator: gas water separator 50 CBM1034-81
Our advantage:
Quality stability: the implementation of the whole process of
quality control, nuanced, all-round testing
Reasonable price: efficient internal cost control, reduce expenses,
and benefit customers
Convenient delivery: cash production line, adequate stock, shorten
the delivery time