60M DVI Extender 3G Repeater Over Single Cat 5E / 6 Local HDMI Loop Out

60M DVI Extender 3G Repeater Over Single Cat 5E / 6 Local HDMI Loop Out

Feature
★ Support HDMI 1.4a
★ Support 3D
★ Support highest video resolution 1080p/60Hz
★ Support 3.4Gbps data rate and TMDS clock up to 340MHz
★ Support 8/10/12 bit deep color
★ Signal transmission: By using single cat-5e or cat-6(recommended) cable instead of DVI cable, it can extend the distance up to 60 meters between TX (Transmitter) and RX (Receiver).
★ No loss of quality
★ Install in minutes
★ Need DC5V/1A power supply

Product Picture

Physical Connection Showing Picture

Interface

RX

TX

Operating and Connecting

1.Connect one HDMI cable between source device and TX (Transmitter) Extender, the max cable distance is 15 meters
2.Connect one HDMI cable between display device and RX (Receiver) Extender, the max cable distance is 20 meters
3.Connect single cat-5e or cat-6(recommended) cables instead of HDMI cables between TX (Transmitter) and RX (Receiver) Extender, the max cable distance is 60 meters
4.Connect 5V power supply to the TX (Transmitter) and RX (Receiver). The Power LED light will be turn on red during working.
5.LED indicator light
(1).TX (Transmitter) LED indicator light:
The blue LED light on RJ45 port will turn on when the source single input well. Meanwhile, the orange LED light on RJ45 port will turn on while the Cat5e/6 cable connects well.
(2).RX (Receiver) LED indicator light:
The orange LED light will turn on continuously when the source signal input well. Meanwhile, the blue LED light on RJ45 port will turn on continuously when the display device connects well.
6.EQ-Set button: Please press the button one time or more while there is no pictures or snow points on the display when all devices connect well.

Specification

Who We Are?

Shenzhen Newbridge Communication Equipment Co. Ltd (short title: Newbridge) is one High-technology manufacturer and found in 2004, located in Shenzhen .Our product is controlled according to the standard of ISO9001 and FCC and CE etc. we have been absorbed in developing, designing, manufacturing and selling cctv security products and Optical network communication e.g. HD-SDI cameras, HD-SDI transmission, video fiber transmission, Ethernet media converter etc.

About Our Factory

Newbridge based on Shenzhen is certified by ISO9001:2000, we have been founde in 2004 .We have three product lines, and the first line is SMT line (surface Mounting Technology). there are three sets SMT high-speed device , two sets full automatic screen printer and one sets reflow Soldering in this line .daily output is up to 20 million dots per 12 hours. The second line is Plug-in lines. There is one sets Wave Soldering, Shearing machine and full function test equipment. The third line is assembly line, the last heat aging and test are the strictest.