Standard efficiency screw 10 HP air compressor Low rotation IP54 rated

Specifications

1. Configuration: Stationary
2. Motor: 10 HP / 7.5 kw
3. Max Bar: 189 psi / 13 bar
4. FAD: 28 cfm / 0.8 m3/min

The LG series compressor represent a giant leap in design and performance with each component designed

for reliability and ease

of maintenance. The compressor is manufactured in compliance with applicable international standardsCE

,IAF and others and designed as per the international quality standards. These new generation

compressor significantly reduce operating costs and provide cost savings with fast return on investment.

1. Drive Motor

IP54 rated,standard efficiency,IEC motors are used on every LG compressor. Over sized cast iron conduit boxes make connections easy. The industry best motor grease is used to protect motor bearings, provide

longer lubricant life, greater shear stability and the best resistance to rust and corrosion.

2. Drive Coupling

The latest mainstream designed spider couplings are used to guarantee the reliability and transmission efficiency and provide vibration free power transmission for quiet and maintenance free operation.

3. Airend · Direct Driven --- No Gearing, No Belt!

Rotors are the key elements in producing compressed air efficiently.KAISHAN airends utilize a male 5 lobe rotordriving rotorand a 6 lobe female rotor(driven rotor).These state of the art Y profile rotors were introduced in the LG series compressor.

They have the following characteristics:

Larger rotors are designed to ensure the airends have slower rotorspeeds to deliver compressed air more efficiently than smaller airends

This translates into energy cost savings and a longer unit life.

The airends are guaranteed for 5 years.The rotor profile minimizes leakage andthe tighter clearances achieved through state of the art manufacturing processes results in higher

efficiency and improved lubrication.

4. Inlet Valve

The inlet valve is the major air flow control component in the compressor unit.It controls air flow to the compressor,either by opening,

throttling, or closing completely in response to pressure transducer controls.

5. Oil Separation System

The threestage separation system, the result of extensive research and development, supplies high quality compressed air.

The separation tank has two different separation stages: Centrifugal and gravity. The third stage separation is provided by a high performance,long life coalescent separator filter. The efficiency of the first two stages assures the long life of this coalescent filter. This system limits oil vapors carryover to below 3 ppm.

6. Kerry Air Filter

LG series compressors use the Kerry air filter which provides filtration to less than 3 microns Ultra Web nanofiber technology.

This technology ensures clean, unrestriced airflow for optimal compressor operation. It has 99.99% filtration efficiency and fully

complies with ISO 5011 standards. Strategic air inlet port positioning receives the coolest air as it enters the cabinet to ensure

superior volumetric efficiency.

7. Cooling System

The cooling efficency of a compressor is of vital importance to ensuring reliability and efficiency. The LG Series compressors use an advanced design axial fan. The fan blade-end tip angle is designed to maximize the air volumetric flow rate cooling the high temperature lubricant oil and compressed air. A large surface area cooler with optimal fin design has been included to provide maximum cooling and longer operating life.

8. Oil Separation System Continue

The air purity meets ISO standard 8573-1:1991, Class 3 Oil Residues. Kaishan's oil separation system is monitored by an alarm system on the electronic control panel.

Specifications:

1. Model Number : LG-0.8/13

2. Motor: 10 HP / 7.5 kw

3. Max Bar: 189 psi / 8 bar

4. FAD: 28 cfm / 0.8 m³/min

5. Weight: 350 kg

6. Dimension: 900 x 700 x 1040 mm

7. Place of Origin: China

8. Configuration: Stationary

9. Brand Name: KAISHAN

10. Delivery Time: As Per Your Requirement

11. Packaging Details: Standard

12. Supply Ability: Enough

Main Products

Stationary Type:

1. Electromotor Powered Screw Air Compressor: 28~2543 cfm, 116~189 psi g, 10~544 HP.

2. Diesel Driven Screw Air Compressor: 212~1377 cfm, 102~508 psi g, 79~857 HP.

3. Electromotor Powered Reciprocating Air Compressor: 2.8~170 cfm, 116~580 psi g, 1~102 HP.

4. Diesel Driven Reciprocating Air Compressor: 48~459 cfm, 73~102 psi g, 15~102 HP.

Movable Type:

1. Diesel Driven Screw Air Compressor: 212~1377 cfm, 102~508 psi g, 79~857 HP.

2. Electromotor Powered Screw Air Compressor: 28~2543 cfm, 116~189 psi g, 10~544 HP.

3. Electromotor Powered Reciprocating Air Compressor: 2.8~170 cfm, 116~580 psi g, 1~102 HP.

4. Diesel Driven Reciprocating Air Compressor: 48~459 cfm, 73~102 psi g, 15~102 HP.

Kaishan group is a state-level large scale enterprise in China, which has been listed among the five industries of Zhejiang Provincial government, the 958 Technology Catching-up Plan and the key enterprises by Zhejiang provincial government. The group is the civilized enterprise of provincial level and contract abiding and trustworthy enterprise of state level.
Currently, Kaishan group has 18 subordinate companies with over 4100 employees. It covers an area of over 430,000 m2 with the total building complex area over 230,000 m2 and the total assets of the group amounts to over 1.5 billion.
"Kaishan" trademark, together with its logo, is the first company awarded with "Chinese renowned trademark" in the same trade and Kaishan air compressor is among the first exempted by Chinese government.
By the year of 2008, the total sales revenue of the group is 2.03 billion RMB, with 173 million RMB of profit, and USD10.69 million worth of export goods. Kaishan group has been honored with "Special Quzhou Mayoral Award" for the past consecutive eight years.
Kaishan group has a sophisticated national-wide retail network supported by the high-quality customer service system. The nine major series of Kaishan product spread from rock drilling unit, screw air compressor to excavator, crawler drill etc, and altogether 18 categories with over 800 individual products.
By far, Kaishan group is the largest rock drill manufacturer in the world, and the largest air compressor manufacturer in China. Exports are shipped to over 20 different nations and regions such as United States, Germany, Japan, South Korea, Russia, African and Latin American countries.
Kaishan group owns the best fine processing equipment over 1000 units. It has formed the machinery processing system with advanced technology, top-rate equipments and structure integrity.
In recent years, Kaishan group sticks to the talent-employment standard of Capable, Tough and Reliable and upholds the enterprise spirit of Flexible, Efficient, and Confident. Focusing on technology and industry innovation and centering product and market restructuring, the group have already planned a "4211" development strategy.
In 2005, cooperating with Xi'an Jiaotong University compressor research institute and interlinking with the state 863 project, the group successfully developed a high-tech product: screw air compressor's core part : screw rotors . It marks the end of relying on import this unit from overseas only in China. The success has made Kaishan group the first in the industry which owns the intellectual property, core technique and competitive advantage among large-scale equipment manufacturers in China. In 2006, Kaishan group was awarded with a second-class outstanding technique invention award by Chinese government for this technology.
Upon the success, we are currently trying to list one of our subordinate company: Zhejiang Kaishan General Machinery Co., Ltd to the share market. Also, we are hoping to develop Kaishan group into a large-scale and diversified manufacturer with its own patent core technique and core competitiveness. We are striving to rejuvenate our national industry and develop as the pillar of Chinese air compressor industry in a yearning for greater contribution to China's harmonious society construction and national equipment manufacturing industry development.