Home /Switching Power Supply /

CM1012 PWM solar charge controller 10A/12V for solar power system

CM1012 PWM solar charge controller 10A/12V for solar power system

Certification:CE
Model Number:CM1012
Minimum Order Quantity:50
Place of Origin:China
Application:Solar System Controller
Rated Voltage:12V
Contact Now

Add to Cart

Active Member
Location: Nanjing Jiangsu China
Address: No.8 Fenghui Avenue, Yuhua Economic Development Zone, Nanjing, 210039,China
Supplier`s last login times: within 3 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details Company Profile
Product Details

CM1012 is PWM solar charge controller with LED indicator for solar power system.

Features:

1. Intuitionistic LED indicators show the current system battery capacity, charging and discharging state of the battery.

2. Having the protection functions as overcharging, over discharging, overload, short-circuit and reversed connection.

3. Tandem type PWM charging makes the charging efficiency increase by 3% to 6%, compared with non-PWM charging.

4. The parameters of charging and discharging have been set during the production (special parameters need to be told in advance), so no need to adjust the parameters.

5. It can set the working mode of the load.

6. USB charging function (optional).

Operation Instruction:

1. Charging and display: After the controller is connected right, if the charging indicator is still not illuminating, this means the sunshine is weak or there is not sunshine. And if the charging indicator is illuminating, it means the controller is charging the battery. When the indicator flickers, it means the battery enters into float charging mode, and this can make the battery at full charging state to lengthen the longevity of the battery. Only when the controller detects the battery over discharging, can it start the hoisting charging mode.

2. Battery capacity and display: When the battery indicator is red flickering, the load will shut time-delayed to protect the battery.


Battery capacity state

Full charged

normal

Low capacity

Low battery warning

indicator

green

orange

red

Red flickering

3. Load state and indicator: When the load indicator is green and flicker, the load will be shut.


Load state

starting

shutting

overload protection

short-circuit protection

indicator

green on

green off

green flickering slowly

green flickering quickly

Specification


Model

CM1012

Low voltage protection

10.7V

Rated current

10A,12A

Low voltage reconnecting

12.6V

System voltage

12V

Temperature compensation

-4mv/degree/2V(hoisting, floating charging compensation)

no load loss

≤12 mA (not including USB)

Charging mode

PWM

charging (Discharging) circuit voltage drop

<0.2V(<0.15V)

Overloading and short circuit protection

1.25 times than rated current, protect the load within 60 seconds. 2.5 times or over, starting the short circuit protection

Hoisting voltage

14.4V (lasting time with 10min)

Float charging voltage

13.7V

installing holes

Φ3.5—55mm*122mm

Environmental temperature

-20 to 50 degree

installing cables diameter

≤16mm2


China CM1012 PWM solar charge controller 10A/12V for solar power system supplier

CM1012 PWM solar charge controller 10A/12V for solar power system

Inquiry Cart 0