Stepper Motor Driver JB430M DC12-40V 0-3.0A 6400 pulse/R
Brand Name:KIMBROUGH
Certification:CE
Model Number:JB430M
Minimum Order Quantity:1pc
Delivery Time:in stock
Payment Terms:T/T, Paypal, Western Union
Contact Now
Add to Cart
Active Member
Location:
Shenzhen Guangdong China
Address:
Building A, Canbo Technology park, Huafa North road, Shang Village, Gongming Town, Shenzhen, China
Supplier`s last login times:
within 48 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
Stepper Motor Driver JB430M DC12-40V 0-3.0A 6400 pulse/R
Features
6 channels constant angle and constant torque microstep, highest microstep is up to 6400 pulse/R
Upmost response frequency amounts to 150Kpps
Once the pulse stops over 100ms, the phase current will automatically cut by half
Bipolar constant current chopper control
Opto-isolated signal Input/Output
Driving current is continuously adjustable from 0A/phase to 3A/phase
Single power input, voltage range: DC12-40V
It can match 2 phase hybrid stepper motors whose current is under 3A, flange size ranges from 28mm to 57mm.
Wiring and Dimension example
Current setting
Microstep setting
| Microstep | 200 | 400 | 800 | 1600 | 3200 | 6400 |
| SW1 | OFF | OFF | OFF | ON | ON | ON |
| SW2 | OFF | ON | ON | OFF | ON | ON |
| SW3 | ON | OFF | ON | ON | OFF | ON |
| SW5 | OFF: accept external pulse signal ON: Adjust Speed RP, the internal pulse is 0-10KHz/s | |||||
Terminal function
Mark | Function | Notes |
Power | Power indicator | The green indicator lights when the power is on. |
RV | Pulse speed potentiometer | Adjust the internal pulse frequency of the driver. When the SW5 is ON, it will decrease counterclockwise and increase clockwise. Range: 0-10KHz/s |
Im | Current setting potentiometer | Adjust motor’s phase current, it will decrease counterclockwise and increase clockwise. |
PU- | Step pulse signal- | Effects on falling edge, the motor goes one step as the pulse input change from “high” to “low”. Input resistance is 220Ω. Requirement: low voltage:0-0.5V, high voltage:4-5V, pulse width >2.5μs |
PU+ | Step pulse signal+ | It can connect +5V - +24V, but an extra resistor is needed when it is over +5V |
MF- | Motor Free signal- | Once effects, it will cut off the motor current, the driver stops working and sets the motor free |
MF+ | Motor Free signal+ | It can connect +5V - +24V, but an extra resistor is needed when it is over +5V |
DR- | Direction control signal- | Change motor’s direction of rotation. Input resistance is 220Ω. Requirement: low voltage:0-0.5V |
DR+ | Direction control signal+ | It can connect +5V - +24V, but an extra resistor is needed when it is over +5V |
V- | Power- | DC12-40V |
V+ | Power+ | |
B- | Connect to the motor | |
B+ | ||
A- | ||
A+ |
! Caution
1. Do not reverse the power input, input voltage should not exceed DC40V.
2. Input control signal is 5V, current-limiting resistor should be connected when it is over 5V.
Stepper Motor Driver JB430M DC12-40V 0-3.0A 6400 pulse/R
Inquiry Cart
0