High quality 3-phase hybrid stepper motor driver Q3HB220M
Brand Name:Jingbo
Certification:CE
Model Number:Q3HB220M
Minimum Order Quantity:1pc
Delivery Time:in stock
Payment Terms:T/T, Paypal, Western Union
Contact Now
Add to Cart
Active Member
Location:
Shenzhen Guangdong China
Address:
Building A, Canbo Technology park, Huafa North road, Shang Village, Gongming Town, Shenzhen, China
Supplier`s last login times:
within 48 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
High quality 3-phase hybrid stepper motor driver Q3HB220M
Constant angle, constant torque microstep driver supplies regulated
phase current for supply voltage from 110V to 220V AC. It is
designed for use with the 3-phase hybrid stepper motor of all kinds
with 86mm to 110mm outside diameter and 5.2is a constant angle and
constant torque stepper motor drive. The driven voltage range from
AC110V to 220V. It can match 3-phase hybrid stepper motors whose
rated current is under 7.0Aand shaft diameter range from 86mm to
130mm. Owe to bipolar constant chopping circuit, it can make motors
low noise and operated smoothly when low speed; the torque is much
greater than 2-phase and 5-phase stepper motor when high speed. It
is widely used in small-sized numerical control device suchas
medical machine, robot, instrumentation, curving machine, laser
labeling machine, inner laser curving machine. Feature● High performance, low price ● 16 channels constant angle and constant torque, the highest
subdivision is 60000s/r ● Highest response frequency: 200Kpps ● The motor phase current is reduced to setting value 100ms after
receiving the last pulse edge ● Bipolar constant current chopping circuit ● Opto-isolated input/output ● Driven current is adjustable in 16 channels from 0.6A/phase to
7.0A/phase ● Single power supply, voltage arrange from AC110V to220V ● Phase remembering function (The driver remembers motor’s phase
when there’s no input pulse is received for 5s and it recovers the
motor’s phase when the power on or signal MF is inactive) Parameter switchesCurrent setting 1. STOP/Im is the rotary switch that can set output current of
holding motor status as 20%-80% of normal output current (increase
in CW, decrease in CCW). 2. RUN/Im is the rotary switch for adjustment of the motor current.
Subdivision setting Q3HB220M drive has two groups of subdivision, each group has 16
channels set by switch SK1/SK2.
SK2 is the second group. The subdivision setting of SK2 is the same
as SK1. Choose SK1 group when subdivision choosing signal SM is at low
voltage and SK2 at high voltage. Wiring exampleCaution 1. Please don’t reverse the power supply, supply voltage shouldn’t
exceed AC220V. 2. Input control signal is 5V, current-limiting resistance should
be connected when over 5V. 3. Alarm indicator lights and the drive shuts off if the drive
temperature is over 70℃. It doesn’t work until the temperature
falls to 50℃. The heat sink is needed when overheat occurs. 4. Alarm indicator lights when overcurrent (short of load) occurs.
Please check motor’s connection and other shorts and turn the power
supply on after removing the trouble. 5. Alarm indicator lights when undervoltage (the voltage is less
than AC110V) occurs. Parameter switch function
Input signal oscillogram Terminal function
|
High quality 3-phase hybrid stepper motor driver Q3HB220M
Inquiry Cart
0