Huawei FusionServer 5288 V3 Rack Server Intel Xeon E5-2600 V3 Series CPU 16 DDR4 DIMMs

Huawei FusionServer 5288 V3 rack server Specifications

5288 V3 with 40 hard disks
Front:

·24 x 3.5-inch SAS/SATA HDDs

Rear:

·16 x 3.5-inch SAS/SATA HDDs

·14 x 3.5-inch SAS/SATA HDDs + 2 x 2.5-inch SSDs or SAS/SATA HDDs

·12 x 3.5-inch SAS/SATA HDDs + 4 x 2.5-inch SSDs or SAS/SATA HDDs

5288 V3 with 28 hard disks
Front:

·24 x 3.5-inch SAS/SATA HDDs

Rear:

·4 x 3.5-inch SAS/SATA HDDs

·2 x 3.5-inch SAS/SATA HDDs + 2 x 2.5-inch SSDs or SAS/SATA HDDs

·4 x 2.5-inch SSDs or SAS/SATA HDDs

·RAID 0, 1, 10, 5, 50, 6, or 60

·Configured with a supercapacitor for power-off protection for the cache (optional)

·RAID state transition, configuration memory, self-diagnosis, and web-based remote configuration

Supported network configurations:

·2 GE electrical ports, supporting Network Controller Sideband Interface (NC-SI), Wake on LAN (WoL), and pre-boot execution environment (PXE)

·4 GE electrical ports, supporting NC-SI, WoL, and PXE

·2 x 10 GE optical ports, supporting NC-SI and PXE

·2 x 10 GE electrical ports, supporting NC-SI, WoL, and PXE

·2 GE electrical ports and 2 x 10 GE optical ports, supporting NC-SI, WoL, and PXE

·Uses Huawei Hi1710 management chip and independent ports

·Supports standard management interfaces, such as SNMP and IPMI; provides GUI, remote KVM, virtual media, SOL, Predictive Failure Analysis (PFA), intelligent power supply, remote control, and hardware monitoring

·Supports Huawei eSight management software and integration with third-party management systems, such as VMware vCenter, Microsoft System Center, and Nagios

·Two hot-swappable PSUs in 1+1 redundancy

·Supports 750 W and 1200 W Platinum AC PSUs.

·CentOS

· Citrix XenServer

· Microsoft Windows Sever

· Red Hat Enterprise Linux

· SUSE Linux Enterprise Server

· VMware ESXi

·Guide rails

·Hold rails and cable management arm (optional)