SPA-4X1FE-TX-V2 4-Port Fast Ethernet Shared Port Adapter Original Cisco
Brand Name:Cisco
Certification:CE
Model Number:SPA-2XOC48POS/RPR
Minimum Order Quantity:1 unit
Delivery Time:2-3 days
Payment Terms:T/T, Paypal, Western Union, L/C
Contact Now
Add to Cart
Verified Supplier
Location:
Shanghai Shanghai China
Address:
26Minyi Road, Xinqiao, Songjiang Industrail Zone Shanghai China
Supplier`s last login times:
within 1 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
SPA-4X1FE-TX-V2 4-Port Fast Ethernet Shared Port Adapter Original Cisco
Products Specifications:
The Cisco Interface Flexibility (I-Flex) design combines shared port adapters (SPAs) and SPA interface processors (SIPs), taking advantage of an extensible design that helps enable service prioritization for voice, video, and data services. Enterprise and service provider customers can take advantage of improved slot economics resulting from modular port adapters that are interchangeable across Cisco routing platforms. The Cisco I-Flex design maximizes connectivity options and offers superior service intelligence through programmable interface processors that deliver line-rate performance. Cisco I-Flex enhances speed-to-service revenue and provides a rich set of quality-of-service (QoS) features for premium service delivery while effectively reducing the overall cost of ownership.
Cisco 2-Port Gigabit Ethernet Shared Port Adapter, Version 2 - Expansion module - GigE - 1000Base-X - 2 ports - for SPA Interface Processor 401, 501, 601
Description:
- Modular, flexible, intelligent interface processors
- Increased speed-to-service revenue
- Dramatically improved return on your routing purchase
Item Technical Data Sheet:
| Features | Descriptions |
Product Compatibility | • Cisco Catalyst 6500 Series Switches • Cisco 7600 Series Router • Cisco 12000 Series Router (8-port only) • Cisco XR 12000 Series Router (8-port only) • Cisco ASR 1000 Series Router |
Port Density per SPA | Four or eight Fast Ethernet ports |
Physical Interface | RJ-45 with support up to 100 meters Category 5 unshielded twisted pair (UTP) or shielded twisted pair (STP) cable |
LED indicators | • SPA status - Bicolor green and amber LEDs encode the SPA status
as follows: • LED off: SPA is powered off • LED amber: SPA is powered on and initializing • LED green: SPA is powered on and operational In addition to the status LED, the SPAs also have a bicolor LED dedicated to each port to indicate port status. The green and amber LEDs encode the port status as follows: • LED off: Port is not activated by software • LED amber: Port is activated by software, but there is a problem with the Ethernet link • LED green: Port is activated by software, and there is a valid Ethernet link |
Features and Functions | • Autonegotiation with autosensing of 10/100 Mbps modes • Both full and half duplex operations • 802.1Q VLAN termination • 802.1ad QinQ termination (stacked VLAN processing) • Jumbo frames support (9188 bytes) • Support for command-line interface (CLI)-controlled online insertion and removal (OIR) • 802.3x flow control • Bridge protocol data unit (BPDU), Cisco Discovery Protocol and VLAN Trunking Protocol (VTP) filtering • Layer 2 Protocol (BPDU, Cisco Discovery Protocol, and VTP) Tunneling • Layer 2 Access List (MAC address-based filtering) • Up to 8000 VLANs per SPA and subject to a limit of 4000 VLANs per port for 802.1q • Up to 5000 MAC accounting entries per SPA (source MAC accounting on the ingress, and destination MAC accounting on the egress) • Up to 2000 MAC address entries for destination MAC address filtering per SPA, and up to 1000 MAC address filtering entries per port • Per-port byte and packet counters for policy drops; oversubscription drops; cyclic-redundancy-check (CRC) error drops; packet sizes; and unicast, multicast, and broadcast packets • Per-VLAN byte and packet counters for policy drops; oversubscription drops; and unicast, multicast, and broadcast packets • Per-port byte counters for good bytes and dropped bytes Other software features supported: • Ethernet over Multiprotocol Label Switching (EoMPLS) • QoS • Hot Standby Router Protocol (HSRP) • Virtual Router Redundancy Protocol (VRRP) |
Network Management | Network management: • Host-system CLI • Simple Network Management Protocol (SNMP) Inventory and asset management-related MIBs: • Entity-MIB (RFC 2737) • Cisco-entity-asset-MIB Fault management: • Cisco-entity-field-replaceable unit (FRU)-control-MIB • Cisco-entity-alarm-MIB • Cisco-entity-sensor-MIB Physical interface management: • IF-MIB • Etherlike-MIB (RFC 2665) Other MIBs: • Remote Monitoring (RMON)-MIB (RFC 1757) • Cisco-class-based-QoS-MIB • MPLS-related MIBs • Ethernet MIB/RMON |
Reliability and Availability | OIR of the SPA within the SIP |
Physical Specifications | • Weight: 0.75 lb (0.34 kg) • Height: 0.8 in. (2.03 cm) (single height) • Width: 6.75 in. (17.15 cm) • Depth: 7.28 in. (18.49 cm) |
Power | • 4-port FE SPA: 12.7W |
Environmental Specifications | • Storage temperature: -38 to 150°F (-40 to 70°C) • Operating temperature, nominal: 32 to 104°F (0 to 40°C) • Operating temperature, short term: 32 to 131°F (0 to 55°C) • Storage relative humidity: 5 to 95% relative humidity • Operating humidity, nominal: 5 to 85% relative humidity • Operating humidity, short term: 5 to 90% relative humidity • Operating altitude: -60 to 4000 meters |
Compliance and Agency Approvals | Safety • UL 60950-1 • CSA C22 No. 60950-1 • EN 60950-1 • IEC 60950-1 • AS/NZS 60950 • EN 60825-1 • EN 60825-2 • 21 CRF 1040 EMC • FCC Part 15-Class A • ICES 003-Class A • CISPR 22 Class A • EN 55022 Class A • EN 300386 Class A • AS/NRZ Class A • VCCI-Class A • EN 50082-1/EN 6100-6-1 • EN 55024 • BSMI Class A • IEC/EN61000-3-2 Power Line Harmonics • IEC/EN61000-3-3 Voltage Fluctuations and Flicker • IEC/EN61000-4-2 Electrostatic Discharge Immunity (8-kV contact, 15-kV air) • IEC/EN61000-4-3 Radiated Immunity (10 V/m) • IEC/EN61000-4-4 Electrical Fast Transient Immunity (2-kV power, 1-kV signal) • IEC/EN61000-4-5 Surge AC Port (4-kV CM, 2-kV DM) • IEC/EN61000-4-5 Surge Signal Port (1-kV indoor, 2-kV outdoor) • IEC/EN61000-4-5 Surge DC Port (1 kV) • IEC/EN61000-4-6 Immunity to Conducted Disturbances (10 Vrms) • IEC/EN61000-4-8 Power Frequency Magnetic Field Immunity (30 A/m) • IEC/EN61000-4-11 Voltage Dips, Short Interruptions, and Voltage Variations Telecom • IEEE 802.3 Industry Standards The Cisco Fast Ethernet SPAs are designed to meet the following requirements (some qualifications are currently in progress): • SR-3580-Network Equipment Building Standards (NEBS): Criteria levels (Level 3 compliant) • GR-63-CORE-NEBS: Physical protection • GR-1089-CORE-NEBS EMC and safety |
Pictures:
SPA-4X1FE-TX-V2 4-Port Fast Ethernet Shared Port Adapter Original Cisco
Inquiry Cart
0