Product Details
Aluminum Profile Smd5050 Digital Pixel Full Color LED Rigid Bar
Outdoor Use
Features:
- This LED rigid bar is full addressable so it can be cut every LED.
- The LED is the most popular chip WS2812, WS2811 chip build inside SMD 5050 RGB.
- Aluminum housing with epoxy waterproof IP65, both side of bar output the waterproof 3Pin connector.
- Every 1 meter bar include 2pcs metal clip(for installation use),
1pcs T type connector(every 5m).
- PCB Color: White and Black are available, PCB Width: 15mm.
- Control: SD controller ,DMX Decoder, Artnet,etc.
- Waterproof, energy-saving, low-cost of maintenance, and long life
span.
- Length: 0.5M, 1M, 1.5M,2M or customized
- It is very cool for LED signs, whole building decoration,stage.
- Aluminum case
- fully addressable ws2812b full color led rigid bar for building
Parameters:
Product Name | WS2812B 60 pixels led bar light |
Model Number | SJ-10060-2811 |
Voltage | DC5V input |
Power | 14.4W/M |
LED Qty | 60 leds/m |
IC Chip | ws2811 built-in 5050 RGB LED chip |
Size/mm | 1000*20 |
PCB Width | 15mm |
PCB Color | Black/White |
Connector | 3Pin waterproof connectors |
IP Rate | IP20,IP65 epoxy waterproof, milky/ clear cover |
Warranty | 2 years |
Instructions:
1. Compatible 12V power supply
An LED 5Volt Driver is required to power the LED rigid bars. They
are available to buy with the LED bar on this page or can be
purchased separately in our LED driver department where we also
sell waterproof drivers. Each metre of LED rigid bar requires 14.4
watts of power so choose a driver powerful enough to supply the
total watts required.
2. Connection:
1) Signal wire: DC+,GND,DAT,
2) DC+ and GND connect to power supply;DAT connect to controller
3) Relative Controller: SPI controller support LPD6803; when use
DMX decorder, can connect to DMX system
4) Support online control
3. Installation:
Each light bar is supplied with 2 metal clips - screw the clips to
a surface then push the light bar into the clips to secure.
4. CE and ROHS approved to comply with Europe safety regulations.
Pictures:
Note:
1. Indoor and oudoor using
2. Turn off the power before installment, don't touch the surface
of the lights when light on
3. Please make sure using in the normal environment
4. To avoid using nearby the hot or heat source place,where has the
corrosive gas.
5. Make sure the installment place could afford 10 times of the
weight of light.
6. Installed position must be no shock, no fire hidden danger
7. Do not touch or/and knock the product body during working
Trade Term:
1. Payment: T/T , (Western Union is welcomed)
2. Production lead time for 100~500pcs: 5-7days,
500~1000pcs:7-15days
3. Sample can be delivered in 3days
4. By Express(EMS, DHL, UPS etc), By Air or By SeaShipping freight
are quoted under your requests
5. Shipping port: Shenzhen/Guangzhou, Mainland China
6. Logo: According to your requirement
7. Discounts are offered based on order quantities
8. MOQ:5pcs, Welcome sample order
Company Profile
Introduction
Shenzhen Shiji Lighting Co., Ltd. was founded in 2010 and since
then we have developed the brand SHIJILIGHTING. Shiji Lighting is
an established firm specializing in the research and engineering of
various LED products. We have a well rounded sales team consisting
of members aging from 26 to 45. Senior staff have conducted
business with companies from all over the world and have a thorough
understanding of clients' differing needs. Therefore, they are able
to provide much guidance and support to our junior staff.
We are equipped with the most advanced automatic machines and well
equipped devices for LED display production which can support our
monthly production capability of up to 10000 sqm.
Here at Shiji, we always focus on the improvement and innovation of
our full color LED display quality,we are very confident that we
can provide our clients with innovative and satisfying products.
We design and manufacture several types of LED display, each of
them meeting the demands of different markets and usage situations,
We always do our best to satisfy all our customer’s requests and
wishes. We welcome challenging projects and any possibility to
cooperate with our clients and help improve their business.
We have been continuously developing various new products to meet
the market demands and we reached great performance in regards of
our wireless LED traffic sign solutions. Our products not only
match the clients’ project application needs but are also produced
according to the electronics criteria required by the European
market. We have CE and ROHS certification issued by BST Technology
testing agency.