Colored Galvanized Steel Sheet Metal Roll Forming Machines 4 KW

Colored Galvanized Steel Sheet Metal Roll Forming Machines 4 KW

Introduction of rib lath mesh machine

Angle protecting mesh was shaped through exoabsuib and stretch the two wings the

galvanized steel and stainless steel. Its wings can union with lime mud reliably it can

shape the smooth, straight, simple angle in the buildings. Meanwhile it can prevent the

angle from disruption, hit, destroy, be widely used I construction, decoration, it has the

effect of protection, easy to take shape and beautiful.

Main technical parameters of rib lath mesh machine

1. Inner diameter: 350
2. Outer diameter: 700
3. Material width: 485-500MM
4. Material thickness: 0.45mm galvanized steel
5. Loading weight: 2000kg
6. Servo motor: 1.5KW
7. Working speed: 450—500 strokes/minute or 10—20M/Minute
8. Punching Motor power: 5.5kw
9. Driven way: Chain and gear
10. Rolling passage: 7+2
11. Rolling thickness 0.45mm
12. Forming Motor power 5.5kw
13. Profiling mold: 45 Steel
14. Hydraulic cut: 7MPA 40L Tank
15. Lubricate: Center control
16. Control method: PLC
17. Electric element: Shneider
18. Machine size: 1120 X 600 X 1500 mm
19. Weight: 5300 KG
20. Installation size: 12570 x 2900x1500 m

Material of Main Equipment

Components and Function

Coil Feeding Equipment Consists of one uncoiler with capacity of 3000kgs and its base. The mandrel can expand or shrink. With separate button to make the mandrel roll.

Guiding Equipment Adopting guiding bar and sliding block to control the width and position of the steel sheet. The coil is guided in the correct position and passed to the roll forming equipment.

Roll forming system The main frame of machine is welded separately and the outside wall is connected by screw after being roto-blasted on the surface. The rollers with quenched treatment after being machined by the exact machining tool.

Hydraulic Station Supplies the initial power to the cuter through a closed oil tank. It is off without cutting, which can save the power.

PLC Control Panel Main parts imported from Mitsubishi. The operation is easy and steady and can be choose operation by manual or automatically.

Introduction of Rib Lath Shearing Roll Forming Machine

The machine is full-automatically controlled by PLC, the whole hydraulic transmission, drive hydraulic oil jar carry out and shear through center pump station towards the hole, hydraulic pressure Motortransmit power as main transmission. it' s reliable to operate steadily by hydraulic pressure, shear towards hole precision geometry form rule of the notch. Its hydraulic pressure transmission,to set correct and fit.

The cold roll forming machine can produce many types of Roof tiles, wall panels, frame profiles, rib lath.The whole line mainly consists of uncoiler and its base, coil sheet flattening equipment, punching equipment , pre-cutting equipment, C-shape forming system, hydraulic station, and PLC controlling system

Company introduction

We are located in Jiangyin city, Jiangsu province, specializes in manufacturing various types of high speed, high precision roll forming machines, with more than 20 years’ experience. It has gained highly praise by customers from all over the world, due to top quality and competitive price of the products. Company principle: top quality, low price.

We a professional manufacturer of cold forming equipment (especially high difficulty cold formed steel), wins the trust of customers by its honesty, pragmatic operation philosophy, advanced technology, innovative design thinking, excellent quality, superior after sales service, competitive price, etc.

Main products

We mainly produce all kinds of roof/ wall tile roll forming machine, C purlin, Z purlin, C&Z interchangeable purlin roll forming machine, uni channel forming machine, rack shelf roll forming machine, guardrail roll forming machine, cable tray roll forming machine, metal deck roll forming machine, down pipe roll forming machine, rolling shutter door roll forming machine, auto stacker, EPS/PU sandwich panel production line, slitting line, cut to length line, tube mill, etc, mainly in construction use.

After sale service

1). Engineer will give free training lessons to labors in buyer’s factory.

2). The Buyer will buy the round-trip air ticket for Engineer if visa application is approved. The buyer is also responsible to bear expenses generated, e.g. visa formalities, meals, accommodation and allowance of USD100 for engineer per day.

3). During this guarantee period, we will provide spare parts without any charge in case of quality discrepancy caused by us. If the malfunctions are caused by your incorrect operations, we will provide the buyer spare parts at cost price.

4). We will charge the buyer cost price of spare parts beyond one year and provide long-term technical guide.

Photo of the Factory

Photos of the Office

Our clients