Product Details
Insulated Metal Sheet & Eps Sandwich Panel Production Line With
1 Years Warranty
auto insulated metal sheet & eps sandwich wall panel making
machine made in China
Introduction of wall panel machine:
1) Product quality: product quality is priority to the
international standard GB/T9775-1999 (equal to European Standard).
2) The panel which produced by the wall panel machine is
heat-resistant, fire-resistant, insulated, light, nonpoisonous,
little pollution, adjusting the humidity of the room.
3) We can offer a basket of services of design, producing,
installation, commissioning and training, as well as turnkey
project for customers.
Feature of wall panel making machine
1. Anti-earthquake with light weight: In view of its weight per
unit area is only 1/10 of red brick wall, the product has good
anti-earthquake performance. It can be used at low-rise building
and high-rise building, and it is preferred to be used at workshop
with steel frame structure. It can replace the color steel plate
with its better performance.
2. Fast and convenient operation: It can be installed by board or
combination with the dry method, and the product can be nailed,
cut, planed, drilled and stuck.
3. Low comprehensive cost: The product is made of agricultural and
industrial wastes, so the production cost is low. With the low load
of girder and short construction period, it can reduce over 20% of
engineering cost after compared with solid brick and hollow brick.
4. Energy-saving and environmental protection: The production
processing need no high temperature and high pressure. Being a
green environmental-protection energy-saving building materials,
the product has no toxicity, harm, pollution and radioactivity.
5. Increasing the usage area: Under the same condition of
heat-preserving and sound insulation, with the thinner plate, the
product can increase over 10% usage area after compared with the
same building.
6. Having the following features: fireproofing, water-proof,
anti-impact, acid & alkali resistant and anti-aging.
wall panel making machine production line
No. | Name | Function | Size (mm) | Power(KW) | Quantity(set) | 1 | Slurry mixer | Mixing cement mortar of up and own materials | 2300×820×820 | 3 | 2 | 2 | Main mixer | Mixing middle materials | 2800×1500×1300 | 18.5 | 2 | 3 | Crusher | Crush and collection material after cutting | 1960×880×1070 | 11 | 1 | 4 | Duplex units feed in mould board | Automatic feed-in mould board on the main formed units, no need by
manual, can reduce labor, improve work speed. | 4800×3100×2800 | 1.5 | 1 | 5 | Main formed units | It includes all of device of automatic feed-in cement mortar, fiber
cloth, spreading, one-time forming and etc. | 29000×1800×1500 | 11.5 | 1 | 6 | oil brusher | It can adhibit the PVC paper on the mould board by automatic. (Or
brush the oil on the mould board) | 2700×1600×800 | 1.1 | 1 | 7 | Automatic tracking cutting device | It can cut the product on production line when it’s wet, and it
will not hurt the product and mould board, reduce the labor, low
labor intensity . | 4500×2000×1450 | 2.45 | 1 | 8 | Hydraulic lifter of receiving board system | It can load the formed board on the form rack, reduce labor, reduce
hurting the board when by manual, and improve automatic. | 2700×3800×1700 | 9.6 | 1 | 9 | PLC Control system | Control the production line automatic. | 750×500×1800 | | 1 |
|
|
Company Profile
Shandong Chuangxin Building Materials Machinery Co., Ltd., as a new
and high technology enterprise registered at provincial industrial
and commercial department and a modern group enterprise integrated
with scientific research, processing and trade mainly focus on
research, development and popularization of decorating technique,
building materials technology and machinery. Its many patent
products were sold throughout China and some were exported to
Russia, Southeast Asia, Hong Kong and Taiwan. We have had rich
assets and intellectual property rights after many years, and in
July 2004, our products were awarded as many laurels such as State
Key New Product by State Ministry of Science and Technology,
Ministry of Commerce, General Administration of Quality
Supervision, Inspection and Quarantine and State Environmental
Protection Administration. With this company got much economic
benefit and social benefit, so it enjoys high popularity and good
credit in the society. The company is composed of Machinery
Factory, Technology Development Center, Decorating Materials
Factory, Handicraft Development Center and Research Institute of
Paint and Coatings, and it establishes cooperative relationship
with Higher Educational Institutions and Scientific Research
Academy in Beijing and Shandong. With perfect scientific research
production base, rich material conditions and technical force and
acute market feeling, the company reformed boldly and strengthened
exchange and cooperation with the world, and at the same time made
its technology and equipment always meet requirements of changing
market. The above let this company ranks as a leading enterprise in
the same industry. In the information times filled with opportunity
and challenge, all employers of our company will abide by the
management ideas of “Take Market as Principle, Take Scientific
Technology as Forerunner” and carry forward the company spirit of
“Only Innovation can bring competitive power and vitality”, to work
towards to key technological breakthroughs and develop industry,
and will exploit, develop and create wonderful tomorrow together
with all friends on the new and high technology road.