24VDC 5 way 1/8'' port 4V120-06 Pneumatic Air Solenoid Valves Internal Piloted Action In Automatic Winding Machine

24VDC 5 way 1/8'' port 4V120-06 Pneumatic Air Solenoid Valves Internal Piloted Action In Automatic Winding Machine

Two-position three-way solenoid valves are usually used with single-acting pneumatic actuators. Two positions are controllable at two positions: on-off, three-way ventilation is provided by three channels. In general, one channel is connected to the air source, and the other two are connected. One channel is connected to the air inlet of the actuator, and one is connected to the exhaust port of the actuator. The specific working principle can refer to the working principle diagram of the single-acting pneumatic actuator.

PRODUCT FEATURES:

• Sliding column structure, good sealing and quick response
• Double-headed two-position solenoid valve with memory function
• No lubrication required
• Excellent insulation material and high insulation
• The coil is made of copper to ensure normal operation​

TECHNICAL DATA of 4V120-06 Pneumatic cylinder valves Internal piloted action:

MAIN DIMENSION of 1/8'' inch hole 5 way 4V120-06 Pneumatic air electromagnetic valves:

Armature & Piston of 4V120-06 Pneumatic control solenoid valves Class F Insulation:

APPLICATION of 220VAC/DC24V 4V120-06 double solenoid coils pneumatic control valves:

Double-acting cylinder with 4V120 5/2 way pneumatic cylinder solenoid valves:

The double-acting cylinder is a solenoid valve that requires a two-position five-way. A pneumatic connector, PU tube is required to connect these components. The solenoid valve has five threaded holes, three on one side and two on the other. The larger one in the middle of the three holes is the air intake hole. The air intake hole is connected to the third joint and the two are the exhaust holes. The exhaust hole only needs to be equipped with a muffler. The other two holes on the other side are the working holes, which are the two holes on the front and rear end caps of the cylinder, so that they are basically assembled. Maintain the continuous airflow, and adjust the pressure of 4-5MPA through the pressure regulating valve to control the piston of the cylinder to reciprocate by energizing and de-energizing the solenoid valve.

Pneumatic solenoid valve installation precautions:

1. According to the fluid chemistry, select the appropriate pneumatic solenoid valve material, such as strong acid gas can not use the pneumatic solenoid valve made of ordinary steel.

2. Check the interface sealing condition of the pipe before installation to prevent the use of foreign matter in the pneumatic solenoid valve.

3. Pay attention to the correctness of the wiring when wiring, and prevent the pneumatic solenoid valve from being safely used due to incorrect wiring or the wrong direction of the coil.

Two main reasons for 4V120 pneumatic solenoid valve coil to burn out:
1) The coil temperature is too high.

2) The inside of the coil is filled with water.

The coil temperature is too high for several reasons:

1: The actual voltage fluctuation is too large, exceeding the rated voltage range. The domestic paint hung wire generally has a voltage deviation of 5%, and a good manufacturer can reach 10%.

2: The medium circulating in your solenoid valve may have impurities, which may be stuck. The force of the electromagnetic wire cannot open the solenoid valve, causing the electromagnetic coil to work all the time. The coil is energized for a long time, the temperature rises, and finally the word burns.

3: The starting power of the coil is not enough, so that the solenoid valve is always open, the coil heats up for a long time, the temperature rises, and finally the word burns.

4: Your PTC thermistor is broken, causing the solenoid valve not to be properly controlled.

Welcome to your enquiry!

* Foucus on your demand, Offer you best solutions as the first mission of Ningbo Brando Hardware Co., Ltd, we work on designing and manufacturing solenoid coils, solenoid armatures and solenoid valves for more than 15 years. * We have served customers from Europe, North America, Middle east, Southeast Asian by designing and manufacturing for their automation fluid control applications, related to industries of pneumatic automation equipment, food beverage dispenser, agricultural irrigation, printing and dyeing, dust collector, home appliance, automobile, textile, refrigeration, etc.

* Since the company's inception, we are dedicated to providing high quality products and service to our customers. With focusing on our customers' demands, at before production we discuss technical points according to applications with customers to reduce mistake and save cost for both sides. During production, we use high precision CNC machine, machining center to control dimensions and improve productivity. At beginning and mid of machining, our senior inspectors check quality regularly by recording data on documents as per ISO9001 management system. Before shipment, our staff make testing and complete inspection one piece by one piece to ensure the products without defect when reached our customer's hands.

* Ningbo Brando Hardware Co., Ltd will offer you best service with fast response, let's make the fluid control application more widely and smartly.

Product Categories:

1. Solenoid Valve
2. Solenoid Coil
3. Solenoid Armature
4. Solenoid Coil Connector
5. Solenoid Valve Timer
6. Pulse Valve
7. Valve Diaphragm
8. Pulse Controller
9. Refrigeration Valve
10. Pneumatic Valve
11. Pneumatic Fitting
12. Pneumatic Cylinder
13. Pneumatic Filter Regulator Lubricator
14. Pneumatic Vibrator
15. Ball Valve
16. Butterfly Valve
15. and so on