1310nm 10G SFP+ Optical Transceiver module over 1 single LC fiber to 10KM

JM-SFTR31-10-10 SFP+ optical transceiver module support 1CH1310nm 10G signal over 1 single mode fiber to 10KM,which is usually applied in Telecommunications room,data center ,DVI,HDMI fiber converter

Features Description

1,Hot pluggable

2,10Gb/s serial optical interface

3,Up to 10km distance

4,Compliant with SFP+ MSA

5,SFP MSA package with single LC connector

6,Digital Diagnostic Monitor Interface

7,Very low EMI and excellent ESD protection

8,High transmission margin

9,+3.3V single power supply

10,Below 1.5W power consumption

11,SFP mechanical interface

12,Wide data-rate range

Standard

1,SFP+ MSA Compliant

2,SFF-8472 reversion 9.5 compliant

3,IEEE802.3-2005 compliant

4,Telcordia GR-468-CORE compliant

5,FCC 47 CFR Part 15,Class B compliant

6,FDA 21 CFR 1040.10 and 1040.11,class1 compliant

7,RoHS compliant

Applications

10G Ethernet , Other optical links,Telecommunications room,data center ,DVI,HDMI fiber converter etc

Descriptions

JM-SFTR31-10-10 optical transceivers are designed for 10Gb/s serial optical interfaces for data communications with single mode fiber (SMF). The transceiver can support 9.953- 11.1Gb/s

The transceiver designs are optimized for high performance and cost effective to supply customers the best solutions for datacom

Functional Block Diagram

Note 1) TD+/- are internally AC coupled with 100Ω differential termination inside the module.

Note 2) Tx Fault and Rx LOS are open collector outputs, which should be pulled up with 4.7k to 10kΩ resistors on the host board. Pull up voltage between 2.0V and Vcc+0.3V.

Note 3) RD+/- outputs are internally AC coupled, and should be terminated with 100Ω (differential) at the user SERDES

The SFP modules implement the 2-wire serial communication protocol as defined in the SFP MSA.

The serial ID information of the SFP modules and Digital Diagnostic Monitor parameters can be accessed through the I2C interface at address A0h and A2h. The memory is mapped in Table 1. Detailed ID information(A0h) is listed in Table 2. And the DDM specification(A2h) is described in Table 3. For more details of the memory map and byte definitions, please refer to the SFF-8472 (Rev 9.3, Aug. 2002), “Digital Diagnostic Monitoring Interface for Optical Transceivers”.

The DDM parameters have been internally calibrated.

Garant optima Company Limited was founded in 2011. Headquarter base is in Hong Kong. It is a national High-Technology enterprise offering R&D, production, marketing and engineering services. Owns more than 500 employees. It invests and holds share of a 50000sqm first-class fully automatic and dust-free workshop in Shenzhen China. LED encapsulation and application manufacturer with the most complete industry chain China.

Garant optima's manufacture LED display, LED lighting,LED module,LED components and LED media.It also provides the products like sdi,hdmi,dvi,kvm,vga,cvi,ahd,tvi video fiber converters&other audio,data,telephone,contact closure media fiber converters and relative services.

As the national High-Tech enterprise, Garant optima has gained highly attention and big support from the Shenzhen led association.

Our products have been brought into more than 100 countries all over the world.

Garant optima strives vigorous to build an innovative and famous LED photoelectric brand, commits to promoting the transformation and upgrading of domestic optoelectronics industry, and contributes to build a low-carbon and energy-saving society.

We implement strict quality control and hope to work with friends around the world for a better future.