Slotted Pipe , Carbon Steel Tube , Oil Screen Tube Control Sand Coring Drilling

Slotted Pipe, Carbon Steel Tube, Oil screen tube control sand Coring Drilling

CASING,PIPE, DRAIN, SLOTTED, LONGITUDINAL,SMLSO.D= 10-3/4" WT=0.450" LENGTH=R3 MATERIAL: Grade K55 9 SLOTS PER FILE, OF 1/2" WIDTH x 2.5" LENGTH. 4 FILES EACH 12", 13 FILES PER METER

THREAD: FLUSHMAX-, 10-3/4” , 5TPI OR EQUIVALENT : ( BTC)

Completely flush OD & ID Thread seal connection:Same thread form as SUPERMAX2° load and 45° stabbing angle Tension:Connectionyield load is 60% of the pipe body yield load Compression: More than 60% of pipe body yield Internal pressure: 80% of pipe body internal yield pressure Collapse: API Collapse pressure Application: CASINGor SLOTTED CASING

Oil screen tube

The main function of the oil screen is to control the sand. The different geologic environment (different lithology) in the well leads to the different grades and types of screens used.

Oil screen overview

The type of oil screen

1. Slotted screen tube
2. Drilling screen
Wire around the screen
4. Bridge screen
5. Compound screen

The characteristics of oil screen

1. Oil screen with J55 or N80 oil casing body processing, high strength, not easy to deformation
2 kerf edge perpendicularity is good, trimming smooth, burr-free, kerf uniform.
3. Large flow area, 27/8 "screen 300 kerfs / 1.5m, flow area of ​​72 per cubic centimeter, than the specifications of the tubing flow area 2.4 times greater. Will help liquid flow.
4. The advantages of using inclined shafts and horizontal wells are more obvious.
5. The overall anti-corrosion treatment, the surface of the screen to form a dense protective layer to improve the corrosion resistance of the screen and wear resistance, which can effectively extend the life of their work underground.
6 for sanding sand diameter greater than 0.3mm sand control sand.
7. Simple operation, easy to use, large diameter, easy to configure the tube string

Oil screen main technical parameters:

Pipe Category: oil casing, tubing;
Pipe length (single): ≤ 15m;
Pipe diameter: 50 ~ 500mm (length ≤ 15m),
Wall thickness: ≤20mm;
Seamless width: (0.10 ~ 4) mm ± 0.03mm;
Number of seams: any
Cloth seams types: parallel, staggered, spiral
Sewing table: any.

Application Status of Laser Cutting Oil Screen:

In oil drilling operations, sieve pipe is an important equipment, often using pre-completion or oil sand control. Currently, the use of more screen is around the wire screen. The sieve is manufactured by winding a wire of a certain cross-section on a metal liner uniformly distributed on a sieve rod or an open hole, and welding the wire with a certain gap as a sieve hole. Although this method of manufacture has been used by many manufacturers in China, there are some problems with this type of screen pipe when it goes down, especially when it is forced to bend through a bend or a horizontal well, it inevitably needs to be connected with a well wall or a sleeve Tube collision, extrusion and friction, prone to chaos phenomenon, resulting in damage to the screen or gap deformation, resulting in completion of the quality and the effect of sand control to reduce or failure, in view of the drawbacks of silk screens, pipe, seam cutting Screen pipe appeared. Due to its superior performance and low cost, kerf pipes are highly regarded and widely adopted by major oil fields. It can be seen that the emergence of kerf pipes provides the material conditions for the development of horizontal and lateral drilling wells and the oil recovery of the high sand reservoir.

slotted drain pipe
slotted pipe manufacturers
schedule 40 pvc slotted pipe
slotted pvc pipe suppliers
slotted pvc drain pipe
slotted pipe specifications
hdpe slotted pipe
slotted steel pipe

For more information, please contact:

ROSCHEN INC.
ROSCHEN GROUP LIMITED
ROSCHEN HOLDINGS LIMITED

Skype: ROSCHEN.TOOL , ROSCHEN_GROUP

WeChat: +86-137 6419 5009 ; +86-135 8585 5390

WhatsApp: +86-137 6419 5009 ; +86-135 8585 5390

Email: roschen@roschen.com ; roschen@roschen.net

Website: http://www.roschen.com ; http://www.roschen.net

http://www.roschen.cn ; http://www.roschendrill.com

http://www.roschenmining.com ; http://www.roschendrilling.com

ROSCHEN GROUP

ROSCHEN Group has the world class advanced equipment like 12000 tons forging, metal processing plant, heat treatment workshop, numerical control plant, Advanced five-axis machining center, etc. professional technical and skilled team to ensure mining, mineral tools, equipment products quality stable and reliable.

ROSCHEN Group Limited is a manufactory with years of research and development for the mining, mineral tools, equipment. We are capability to produce high performance world class products and control excellent quality. Our main product includes tricone bit, diamond core bits, drill pipe, core barrel, TCI tricone bit, mill tooth tricone bit, RC hammer, DTH bit, etc.

ROSCHEN Manufactory PROCESS

ROSCHEN Sales Value Growing Up!

ROSCHEN'S MISSION

1. Strive to create and supply Best quality products for the industry that last longer than the average products.

2. Provide excellent service for our clients. 24 hour-7 days /week schedule to get our clients what they need – FAST.