EL Conductive ITO Film/ITO PET Film/ITO Film

Conductive ITO PET Film ITO Film for Electroluminescent Printing ITO Film

ITO (Indium Tin Oxide),

PET=Polyester film (polyethylene terephthalate).

A wide range of optically clear ITO COATED PET FILM or ITO PET FILM is offered by PRCHEMA.ITO coated PET film is Indium Tin Oxide coating onto a transparent PET film to make the surface conductive but still transparent.ITO PET FILM products have many uses, for example, as components of touch screens and other position sensors, electroluminescent (EL) lamps, liquid crystal devices, EMI shielding, electrophoretic displays, smart windows and transparent heaters.PROCHEMA ITO PET FILM products are produced by vacuum sputter deposition of ITO, a process that affords excellent coating uniformity and adhesion. All standard ITO PET FILM products, which are listed below, are produced on optical grade polyester film.

Please find the specification table below for your reference,contact us for detail data sheet and certificates.

Please NOTE the regular specification products are generally IN STOCK. Kindly contact us for more information.

If you need to customize others specifications,we are available to help with pleasure.

PROX-50,PROX-100 are generally recemmend For Electroluminescent Printing.Kindly contact us for more information.

Build Sequence

Thermal shrinkage

The ITO COATED PET FILM thermal shrinkage depends on the thermal shrinkage of PET Film.Our FG1 PET film with low heat shrinkage(see data below),are quite suitable for Electroluminescent printing.Due to the thermal shrinkage of ITO PET Film, film sheet need to be cut generally 1% larger than the size of the EL panel,and before printing,need to heat the film for shrinkage to make the film size stable. generally at 120C for 2 hours .

NOTE :the temperature and time of heat should be higher and longer than the temperature and time of sliver paste heating.

Electrical Uniformity

All ITO PET FILM products feature electrical uniformity of 10% within any one square foot area, defined as the maximum difference from the average ohms per square value within that area. However, touch screen manufacturers typically achieve <1% resistance linearity by orienting their sensors (busbars) so that the electrical current path is always in the direction of the length of the film roll.

Handling ITO PET Film

Vacuum deposited ITO coatings are very thin and are easily scratched or cracked if handled improperly. When removing film from a roll, care should be taken not to bend or crease it. It is important never to allow the ITO coated side to come in contact with a surface, such as a table, during processing operations. Sliding ITO coating over a surface will scratch the coating, resulting in elevated surface resistance and visible defects. Please note that all ITO PET FILM product supplied in sheet form is supplied with protective liner on all surfaces.

Ordering ITO PET FILM Products

PROCHEMA sells ITO PET FILM products in roll form of 250m x 1220mm (cut to 610mm/305mm width ). When ordering rolls of film, please correctly specify the film thickness (microns, mils or gauge units), film width, length of film on each roll and number of rolls desired. Rolls are supplied on 6 inch or 3 inch cores depends on your requirements.

Products Details:

The Slitting for the ITO Film

The Resistance Test of the 100ohm ITO Film

The Transmittance test for the ITO Film

Shipping for Conductive ITO Film

1, Appointed Shipper ( Freight Collect )

2, Our Shipper ( Freight Repaid )

A. Flexible for order quantity :

We started from small business many years ago,we know the importance of efficient support from supplier.

So no matter how small or how big the order or client is, we do with our heart.

For urgent delivery, we are flexible to adjust our production schedule slightly to feed your production.

We are flexible to develop new films within our ability upon your request with min.investment when necessary.

B . Flexible Payment term:

We are flexible to accept below payment terms:

T/T in advance, L/C at sight, L/C irrevocable 30 -60 days,Western Union,Paypal,Alibaba Escrow

C.Flexible Trade term:

We are flexible to accept FOB, also we have plenty of good sources of logistics to do CNF,CIF,DDU etc, can even do Door-Door service to save your time and energy.

Our advantages :

Yes,we could supply our ITO Film sample for your testing:

Size : A4 (210mm*290mm)

Resistance : 35ohm-100ohm/sq

Lead time : Within 5 days

Sample : for free

Shipping cost: Freigth collected

The detail trade term please ?

The quotation of ITO Film is based on FOB Shenzhen

Payment : T/T Western Union MoneyGram Paypal L/C D/A D/P

Please contact us for more information.

Thanks for your interest in our material and service.

To get quick quotation and response,please kindly mention below information in your inquiry:

1.Your application

2.Thickness

3.Specification

4.Quantity

5.Your company information