3W Solar street lamps Solar garden light High quality low price(HYD-3X-01)

3W Solar street lamps Solar garden light High quality low price(HYD-3X-01)

1. Features:

1. Induction way: light sensor, human infrared sensor

1. Life : 5-10 years

1.Fireproof waterproof material

I. sensors + light control.

If somebody move. the light on 30s when dark.

2. Specification

Product Type: Small wall lamp 3W Induction
Solar panels: 6V 500ma 2.5w monocrystalline silicon
Battery: 3.7v 4400mah lithium battery
Source: “2835″ patch led 38PCS
Power source: 3w
Charging time: 8 H
Working time: more than 12 hours
Plastic material:. ABS PC aluminum.
Surface Technology: aluminum anode sandblasted
Induction way: light sensor, human infrared sensor
Sensing distance: 6-12m
Protection: IP65
Lumen: 15-20 Weight: 0.77KG / PC
Product size: 220 * 140 * 80mm
Box size: 250 * 175 * 90MM
Carton size: 46 * 44.8 * 42.4cm
30 a box NW / GW: 16.8 / 17.8KG
Carton volume: 0.087m³

3. How to use?

1. Unlock and activate the device .

The battery is attached inside and locked with screws for safety purpose during shipment. Therefore, users have to use the supplied key pin to click the ‘on/off’ button and unlock the battery and lighting system

2. How to Install the device

Please use the supplied Expansion pillar-hinge and screws to mount the device on the pole, wall or anywhere outside you want for lighting Install below.After installed hang wallboard, hanging lamps and lanterns on the hook behind the wall, yank down, until it is from the horizontal direction not to come out.
3. Charging Via solar panel:Please install the device facing the south and make sure the solar panel able to receive good sunlight directly without any shelter or glass Normally it can be fully charged in one day under an ideal bright sunlight

4. Night sensor function It will auto turn on light in dim mode during the night time or dark area and auto turn off during the daytime or bright area

5. Bright light mode .When somebody move within 6-12M. The lights on for 30s and turn off.

1. Warning

1. Keep the device away from fire, Water and moist places in order to avoid explosion , leakage, moisture;

2. Any severe shock to the charger is not recommended;

3. No one except professional technicians should attempt to disassemble the charger in order to avoid damaging the charger .

5. Kindly Note

1. Please fully charged the device before the first use

2. If there is no good sunlight in 3 months, the battery may be out of power. So you have to charge it with bright sunlight. When it’s fully charged, please use the supplied key pin to unlock the device and lighting system, otherwise, it will not be able to function anymore.

3. If the light blinks, it shows that the power is low. Thus, you have to charge it with the sunlight right away. Otherwise, the device will stop functioning soon.

4. If there is no good sunlight or during the winter season, especially at the North countries, it may take longer time to fully charge the device and this is a normal situation for solar products.

6. Package Included:

1. Key pin:1pcs

2. Expansion pillar-hinge: 3pcs

3. Screws: 3pcs

7. More Details:

8. Contact: