0.08*105P*10.5TS Wireless Charging Receiver Card Coil PCW-50R21-A1109803
Brand Name:uchi
Certification:UL ROH
Model Number:PCW-50R21-A1109803
Minimum Order Quantity:10000
Payment Terms:Western Union, MoneyGram, T/T
Place of Origin:Made in Dongguan
Contact Now
Add to Cart
Verified Supplier
Location:
Dongguan Guangdong China
Address:
Room 810, Unit 2, Building 5, Huixing Commercial Center, Dongsheng Road No.1, Zhongshan Dong, Shilong Town Dongguan, GUANGDONG, 523326 CN
Supplier`s last login times:
within 1 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
Notching L wireless charging coils assembly PCW-50R21-A1109803 for
smart tv or phone charger and notebook
1.DIMENSIONS(MM)
| A(mm) | 49.0+/-1.0 |
| B (mm) | 43.5+/-1.0 |
| C(mm) | 20.5+/-0.5 |
| D(mm) | 40+/-3.0 |
| E(mm) | 6.0Ref |
| F(mm) | 3.0+/-1.5 |
| G(mm) | 2.1Max |
2.MATERIAL:
a. CORE:BP95TG50*0.3 Without a round hole
b.WIRE:∮0.08*105P*10.5TS
c.Sn:Sn99.3% Cu:0.7%
d.doulb faced adhesive tape:.&43*43MM 9448A 3M
&40*22MM 9448A*3M
e.tape maroon mylar tape (5.0mm width)
3.ELECTRICAL DIAGRAM:
4. ELECTRICAL CHAR ACTERISTIC:
| ITEM | SPEC | TEST EQUIPMENT | TEST CONDITION |
| L | 6.3uH+10% | WK5237 OR EQU | 100KHz/1.0V |
| DCR | 50(mΩ)MAX | 502BC | |
| Q Value) | 60 Min | WK5237 OR EQU | 100KHz/1.0 |
5.SPECIFICATION NO:
PCW 50R21 A1109803 K |
6.TEST DATA:
| ITEM | L(μH) | DCR(mΩ) | Q | |
| SPEC | 6.3+/-10% | 50MAX | 60 Min | |
| 1 | 6.29 | 37.7 | 80 | |
| 2 | 6.31 | 37.9 | 87 | |
| 3 | 6.28 | 37.6 | 82 | |
| 4 | 6.30 | 37.8 | 85 | |
| 5 | 6.31 | 37.5 | 86 | |
| 6 | ||||
| 7 | ||||
| 8 | ||||
| 9 | ||||
| 10 | ||||
X | 6.298 | 37.7 | 84 | |
| R | 0.03 | 0.4 | 5 |
7.PACKAGING
a.quantity
b.packaing dimensions(mm)
used PE packing
| L | W | H |
| 350MAX | 350MAX | 170MAX |
c: Storage
Please be sure to the parts at 35℃or less,70%RH or less,and isolate the parts from sulphic and chloric atm osphere
Please be sure to the parts at 35℃or less,70%RH or less,and isolate the parts from sulphic and chloric atm osphere
8.RELIABILITY TEST
.1.STORAGE TEMPERATURE: | -40℃～85℃ |
.2.OPERATING TEMPERATURE RANGE : | -40℃～+85℃(CONTAIN HEATING COIL) -40℃～+85℃ |
3.EXTERNAL APPEARANCE : | NO EXTERNAL DEFECTS CAN BE FOUND IN THE VISUAL INSPECTION. |
4. TERMINAL STRENGTH : | FIXED INDUCTORS,ONE END OF THE ELECTRODE WITH 0.45KG PULLING FORCE,GUIDED THE NEEDLE DOES NOT FALL OFF. |
5.INSULATING RESISTANCE : | THE INSULATION RESISTANCE SHOULD BE OVER 1000MΩ WHEN D.C.100V IS APPLIED TO THE WINDING –CORE. MEANWHILE NO STRUCTURE AND ELECTRIC DEFECTS SHOULD BE FOUND FOR 1 MINUTE. |
6. HUMIDITY TEST : | INDUCTANCE DEVIATION IS WITHIN ±10.0% AND NO STRUCTURE AND ELECTRIC DEFECTS CAN BE FOUND AFTER 96±2hours TEST UNDER THE CONDITIONOF RELATIVE HUMIDITY OF 90～95% AND TEMPERATURE OF 40±5℃. AND 1 HOUR STORAGE UNDER ROOM AMBIENT CONDITIONS AFTER THE DEVICE IS WIPED WITH DRY CLOTH. |
7. VIBRATION TEST : | INDUCTANCE DEVIATION IS WITHIN ±10.0％ AFTER 1 HOUR SWEEPING VIBRATION IN EACH THREE DIRECTIONS. NAMELY, FREQUENCY IS10～55Hz ANDTHE AMPLITUDE OF 1MINUTE CYCLE IS 1.5mm . |
9.Background
Inductive Coupling: good coupling between two coils, a transmitter coil and a receiver coil. An alternating current in the transmitter coil generates a magnetic field which induces a voltage in the receiver coil. This voltage can be used to power a mobile device or charge a battery. It is ideal for wireless charging transmitter coil assembly and increase the charging efficiency.
10.Features
Wireless charging transmitter coil assembly (Tx - coil)
Litz wire winding Shield by Ni-Zn ferrite material
Compliance with Qi standard of WPC
11.Applications
Mobile Phones
Battery or battery Chargers
Cameras
MP3 /PMP
MID's
Hand Held Devices
Gaming devices
0.08*105P*10.5TS Wireless Charging Receiver Card Coil PCW-50R21-A1109803
Inquiry Cart
0