LM75AD - Semiconductors - Digital temperature sensor and thermal Watchdog

Quick Detail:

Digital temperature sensor and thermal Watchdog

Description:

The LM75A is a temperature-to-digital converter using an on-chip

band-gap temperature sensor and Sigma-delta A-to-D conversion

technique. The device is also a thermal detector providing an

over-temp detection output. The LM75A contains a number of data

registers: Configuration register (Conf) to store the device settings

such as device operation mode, OS operation mode, OS polarity

and OS fault queue as described in the functional description

section; temperature register (Temp) to store the digital temp

reading, and set-point registers (Tos & Thyst) to store programmable

overtemp shutdown and hysteresis limits, that can be communicated

by a controller via the 2-wire serial I2C-bus interface. The device

also includes an open-drain output (OS) which becomes active

when the temperature exceeds the programmed limits. There are

three selectable logic address pins so that eight devices can be

connected on the same bus without address conflict.

The LM75A can be configured for different operation conditions. It

can be set in normal mode to periodically monitor the ambient

temperature, or in shutdown mode to minimize power consumption.

The OS output operates in either of two selectable modes: OS

comparator mode and OS interrupt mode. Its active state can be

selected as either HIGH or LOW. The fault queue that defines the

number of consecutive faults in order to activate the OS output is

programmable as well as the set-point limits.

The temperature register always stores an 11-bit 2’s complement

data giving a temperature resolution of 0.125 °C. This high

temperature resolution is particularly useful in applications of

measuring precisely the thermal drift or runaway.

The device is powered-up in normal operation mode with the OS in

comparator mode, temperature threshold of 80 °C and hysteresis of

75 °C, so that it can be used as a stand-alone thermostat with those

pre-defined temperature set poin

Applications:

• Pin-for-pin replacement for industry standard LM75 and offers

improved temperature resolution of 0.125 °C and specification of

a single part over power supply range from 2.8 V to 5.5 V.

• Small 8-pin package types: SO8 and TSSOP8

• I2C-bus interface with up to 8 devices on the same bus

• Power supply range from 2.8 V to 5.5 V

• Temperatures range from –55 °C to +125 °C

• 11-bit ADC that offers a temperature resolution of 0.125 °C

• Temperature accuracy of:

±2 °C from –25 °C to +100 °C

±3 °C from –55 °C to +125 °C

• Programmable temperature threshold and hysteresis set points

• Supply current of 3.5 mA in shut-down mode for power

conservation

• Stand-alone operation as thermostat at power-up.

• ESD protection exceeds 2000 V HBM per JESD22-A114,

200 V MM per JESD22-A115 and 1000 V CDM per JESD22-C101

• Latch-up testing is done to JESDEC Standard JESD78 which

Specifications:

Competitive Advantage:

Warranty :180days for all goods

Free shipping:Order over $600 win a free shipment fee:goods weight below 3Kg.

Mega Source Electronics stocks components ready to ship. Hard to find, obsolete and highly allocated integrated circuits and semiconductors are all can be found by us.

Mega Source Electronics has established a well-developed logistics system and global logistics network, which can guarantee our service very quick, convenient and efficient.

Mega Source Elec. Limited is a leading independent electronic components supplier and distributor since 2004.Mega Source Elec. Limited has been specialized in providing Original Equipment Manufacturers (OEMs) and Contract Electronic Manufacturers (CEMs) which is hard to find, obsolete and hot sales integrated circuits ,semiconductors,LCD displays,power bank ect.

With years’ development, we have had developed a complete electronic components supply and distribute system.
Through our importing and exporting of components all around the world, Mega Source Elec. Limited can quickly feedback and satisfy customers’ need.
Besides, we have had gained a great reputation in domestic and international market for our experience and market insight, as well as our up-front, proactive, and responsive approach to service, adequate inventory and unwavering commitment to quality.

How Mega Source Elec. Makes A Difference In The Distribution Of Electronic Components

Quality Inventory

At the heart of Mega Source Elec. lies a commitment Mega Source Electronics stocks components are

to total customer satisfaction with a secure quality ready to be shipped.

system .We have professional testing facilities and Hard-to-find,obsolete and high demand integrated

and experienced QC& engineering team.With advanced circuit & LCD display ect. can be found by us.

equipment and experienced industry experts, Mega

Source Elec. is committed to fulfilling the needs of

our customers .

Team Price

Our sales representatives, customer service agents, We offer the most competitive price for you ,

quality inspectors and component engineers strive to saving your purchasing cost.

Speed Environmental

Mega Source Electronics has established a well- Our service is in strict compliance with global

developed logistics system and global logistics network, environmental regulations and standards. We

which guarantees our service is very quick, convenient resolve to fulfill social responsibility and pay

and efficient. attention to environmental protection.

Logistics Source

Perfessional expert/import documentation work Franchised distributor

MEGA SOURCE TEAM

More than 50 staff are in MEGA SOURCE.We are always here to fulfill your electronic components needs.

MEGA SOURCE BANK INFORMATION

• BANK NAME: HSBC HONGKONG

BENEFICIARY'S NAME: MEGA SOURCE ELEC.LIMITED

ACCOUNT: 509 744454 838

SWIFT CODE: HSBCHKHHHKH

BANK ADD: 1 Queen’s Road Central ,Hong Kong

• PAYPAL

ACCOUNT :sales1@megasourceel.com

• WESTERN UNION

ACCOUNT:JIAXIN ZHONG (Given name: JIAXIN, Family name: ZHONG)JIAXIN ZHONG (Given name: JIAXIN, Family name: ZHONG)

TEL：86-755-83695299

ADDRESS：22B FuHongGe, FuXing Garden Building, FuXing Rd, FuTian Dist. Shenzhen 518033