Add to Cart
Automatic 0 - 20000μs/cm Electrical Conductivity Analyzer / Meter
Probe TCD10AC- TCD-S1C10
1. Application
Monitoring conductivity of surface water and wastewater, also could be used to for monitoring acid, alkali, salt concentration and total dissolved solids.
• Water/wastewater treatment
Inflow of the plant, water collection well, aeration tank, the effluent, etc.
• Pulp and paper, power plant, mine
Water treatment, chemical treatment feeding
2. Features and Benefits
• Large LCD screen with backlit.
• All kinds of data has password protection to avoid misoperation.
• History curve function: the measurement data is collected every 5 minutes, one month data can be stored.
• Notepad function, provides the record of operating and alarming time.
• When the electrode is calibrated, the mode, time and results are recorded, easy to review and analysis the change.
3. Specifications
Performance characteristics | |
Measuring Range | 0~20000μs/cm |
Accuracy | 0.5%±1LSD |
Repeatability | 1% |
Sensitivity | 0.02pH |
Calibration | Factory calibrated, also can be calibrated by customer on site |
Display | LCD displays data including date, time, measurement value, trendline, etc. |
Data storage | Automatic data store, power-off data protection |
Outputs | |
Analog Outputs | 0-10mA/4-20 mA output( maximum load 750 ohms) |
Relay outputs | 2 Relays with programmable hysteresis |
Relay capacity | 3A, 220VAC |
Digital Communication | MODBUS RS485,Profibus DP is optional |
Power supply | |
AC power supply | 90~265 VAC, 50Hz |
DC power supply | 24 VDC ±10% |
Physical parameters | |
Dimension of Transmitter | 146×146×108mm(W×H×D) (5.7*5.7*4.3 in.) |
Dimension of Sensor | Φ28×98mm (1.1*3.9 in.) |
Materials | --Transmitter: PC --Sensor: Polyester |
Process connection of sensor | NPT 3/4 |
Weight | --Transmitter: 1Kg --Sensor: 0.5Kg |
Length of sensor's Cable | 10m, Shielded cable (other length available) |
Environmental conditions | |
Ingress protection | --IP66 (transmitter) --IP68 (Sensor) |
Operating Temperature | --Transmitter: -20~60℃ --Sensor: 0~60℃ |
Operating Pressure | ≤10Bar |
4. Ordering Information
Ordering Information | |||||||
Transmitter Selection | |||||||
Single or duplex isolate 4~20mA output | Signal output | Power version | |||||
TCD | |||||||
code | meaning | code | meaning | code | meaning | ||
1 | Single isolate 4~20mA output(ORP value) | 0 | 4~20mA | AC | 220VAC | ||
1 | RS 485(Modbus) | DC | 24VDC | ||||
2 | Profibus DP | ||||||
Example TCD10AC, conductivity analyzer transmitter, output Single isolated 4 ~ 20mA (conductivity), 220V AC Power Supply. | |||||||
Sensor Selection | |||||||
Measuting range | Cable length | ||||||
TCD-S | |||||||
code | meaning | code | Meaning | ||||
0 | 0~20μs/cm | C10 | 10m cable | ||||
1 | 0~200μs/cm | CXX | XXm cable | ||||
2 | 0~2000μs/cm | ||||||
3 | 0~20000μs/cm | ||||||
Example TCD-S2C10, a conductivity sensor, 0~2000μs/cm, with 10m cable. |
(3) Accessories
FA0000: Immersion mounting bracket, stainless steel
FA0001: Immersion mounting bracket, PVC
FA0020: Stainless steel floating ball mounting bracket
FA0021: PVC floating-board mounting bracket
FA0031: Circulation mounting accessory, PVC
FA0910: Stainless steel adapter
FA0911: PVC adapter
FA0800: Instrument protective housing, stainless steel
FA0810: Instrument protective housing, stainless steel, with heater unit
FC0100: Ultrasonic self-cleaning device