PoE (PSE) 10/100 Base - TX To 100 Base - FX Media Converter Iron Material

PoE (PSE) 10/100Base-TX to 100Base-FX Media Converter

Fiberroad PoE(PSE) Converter is a copper to fiber Ethernet solution, designed to make conversion between 10/100Base-TX or 10/100/1000Base-TX to 100Base-FX or 1000Base-FX, complies with IEEE802.3af Power Over Ethernet standard with build-in AC power.
Power Sourcing Equipment (PSE) which combines data received over a TP link with 48VDC power, providing power to IEEE802.3af powered device (PD) over the existing CAT5 UTP cable. And other support Link fault Pass-Through (LFPT), Store and Forward Switching, auto or forced mode setting for copper Ethernet as well as auto laser shutdown.

PoE(PSE) Converter ​Features

- ON when the power supply is turned on
- Bright when optic fiber cable is connected well, but no data transmission
- Blinking when receiving data
- ON when FX link is in full duplex mode
- OFF when FX link is in half duplex mode
- Bright when twisted pair is connected well, but no data transmission
- Blinking when receiving data
- ON when TP link is in full duplex mode
- OFF when TP link is in half duplex mode
- ON 100M
- OFF 10M
- ON when connect a correct PD load
- OFF when no load or wrong load
- Blinking when load is abnormal
- ON when POE 48V power is ok
- OFF when POE 48V power is losing or too low

PoE(PSE) Converter ​Technical Specifications:

Data Rates:
- 10/100 Mbps (802.3 10Base-T/802.3u 100Base-T)
- 100Mbps (100Base-FX)
Input Power Requirements:
- Input voltage ........................... 100 VAC to 240 VAC
- Input frequency ................................. 47 Hz to 63 Hz
Power over Ethernet Output:
- Pin Assignment and Polarity……...4/5 (V+),7/8 (V-)
- Output Power…..please refer to ordering information

- Efficiency ....................................................75% min
- Short circuit protection........................ auto recovery
- Over current protection ....................... auto recovery

Environmental Conditions:
- Operating temperature ....................... …0℃ to 50℃
- Cooling ........................................ free air convection
- Storage temperature ...................... -20℃ to +85℃
- Operating Humidity …... 90% max, non-condensing

Mechanical Specifications:
- Case Material………………………………Iron
- Case Color………………………………….Black
- Net Weight…………………….540g approx. / unit
- Dimensions………110(W) x 40(H) x 140(L) (mm)
Do not include transceiver length

Connectors:
- AC Inlet……………………………………IEC-J-4
- LAN……………………………….Shielded RJ-45

- Fiber………………………………see ordering information

PoE(PSE) Converter ​ Dimensions

Ordering Information:

*XX-XXX: supports optic connector / fiber type and distance. For more details,
please refer to the list below.

FiberRoad founded in 2008, is committed to developing and manufacturing and selling network communication products. In particular, the focus on fiber optical technologies, Ethernet technologies and the integration of broadband access technologies. With leading-edge technology and high quality service as the driving force, FiberRoad continued steady growth, and become a top global equipment supplier of innovative last-mile access in the telecommunications market.c

Products and Market
FiberRoad products include a broad line of FTTH, Fiber Media Conversion platform, Manageable media converters, Fiber Switch, Industrial Switch, SFP transceivers, components and subsystems, CWDM/DWDM system , Passive products, In addition, we supply analogous products to telecom fixed wavelength, data communications and cable TV markets.

As our professional engineering team have devoted ourselves to the R&D for a long time, so that the products have been quiet mature. We have received much popular recognition from our current Telecom operators, Telecom engineering contractors, and Solution Partners in the world. This alliance covers Europe, Asia, the Middle East, Africa, plus North and South America. This global partnership receives direct engineering and technical support from our company headquarters in Shenzhen.

As services such as voice and multimedia are moving to IP based technologies, carriershave found that their core networks can be operated more effectively and economically if the public switching networks are migrated to a next generation IP based networks. This proactive thinking will allow FiberRoad to continue developing IP Camera solutions for today and tomorrow's markets.

FiberRoad Values
FiberRoad’s continuing mission is to provide our customers with "on time" solutions, quick and effective customer support, and valuable products with extended service life.

Providing innovative last-mile access solutions in telecommunication market

Providing customers with “on time” solutions, quick and effective customer support, and valuable