Add to Cart
High pressure air compressors 400W stationary PDT ( LED ) skin rejuvenation equipment
JET PEEL WITH PDT SYSTEM
JPD001
It is a simple and effective superficial peel that helps rejuvenate the facial skin. It makes use of pressurized Oxygen to accelerate a liquid agent (saline) to supersonic velocities, creating an exfoliative effect on the skin. The liquid agent (saline) is compounded with different vitamins and supplements that will address the problem of the patient. The high velocity, at the speed of 200m/s, peels the superficial layers of the skin allowing better penetration of the compounded substances, and prevents skin inflammation and infection by saline solution which is put out in spray. The anaerobic bacteria in the sebaceous glands can not exist when oxygen is spray into the skin. At the mean time this system supply sufficient nutrition to the skin, accelerate the cell regrowth, subsequent reepithelialization takes place resulting in younger, healthier skin.
TECHNICAL PARAMETER:
Wave length of PDT : Red Light 630±5nm
Blue Light 460±5nm
Treatment Intensity of PDT : 250mW/cm²
Max. Pressure of Air Compressor: 8 Bar
Min. Pressure of Air Compressor: 6 Bar
Max. Air Flow of Air Compressor: 109L/Min
Power of Air Compressor: 400W
Compressor Type: Oiless Silent Pump
Control Panel Instruction:
JET PEEL
Jet peel treatments are highly effective in skin texture
improvement, wrinkle reduction, removal of unwanted pigmentation
and overall skin rejuvenation. It is also very useful with acne,
blackheads and other comedone eruptions as it quickly and
effortlessly removes them without any pain or discomfort. This
equipment can be used for treatments most commonly performed on the
face, neck and decollete areas, also other area as legs and abdomen
where needs smoothing, deep cleansing and hydration such as the
hands, feet, chest, back and even elbows. Acne treatments are often
done for deep cleansing and healing enhancement.
FEATURES:
-- Light skin Detection Lens
-- LCD display for skin observation
-- New concept of skin rejuvenation, the most advanced skin renew technology.
-- Combined supersonic technology and photodynamic therapy.
-- Mild and painless treatment, safe and effective.
-- User friendly design, easy to operate.
APPLICATION:
-- Acne removal: removal acne, comedones, and acne scar. Restrain the inflammation
-- Wrinkle removal : removal wrinkles around lip, eye pit, eyebrow, neck and wrinkles that caused by pregnancy
-- Skin rejuvenation: removal pigment and freckles; contract large hair pore, clean the skin completely, improve the flexibility and tone of the skin.
-- Promote the hair regrowth : change the status of alopecia seborrheica, alopecia areata, hair nursing
-- Scar removal: scar, acne scar caused by laser treatment, burn, surgical etc.
PDT SYSTEM
Beam Therapy was brought forward early in 18 century, at the same
time , the recipe to cure tuberculosis is of sunshine shining . In
1903, a professor in Denmark was awarded Nobel Prize for his
research of utilizing ultraviolet to cure phthisic skin as well as
red light to cure smallpox.
The instrument makes use of power light caused from 624nm pulse to
procure very excellent therapeutic effect without any side effect
to eyes. It doesn’t hurt or break skin. Power light shining
scarfskin can stop decomposition and cohesion of black pigment .
When power light is shining healthy skin , the energy will decrease
automatically, and collagen in hypodermal organization will
realign, with view to enhance the luster and spring , contract skin
pore and lighten small wrinkle.
INTRODUCTION FOR COLOR PHOTON
Red: Promote blood circulation, activate muscles, reduce fat,
relieve anemia and shortness of breath, improve cardio-pulmonary
function, and evenly largely benefit mood.
Blue: Promote the synthesis of protein and gastric collagen,
activate muscles, contract the slack skin and reduce lines of
pregnancy. Irradiation to the point of glabella can compose mood
and relax body and soul.
PRECAUTIONS:
(1) Should be carefully applied on pregnant women, patients with
epilepsy or having received treatment with steroid or cortisone.
(2) This machine should be placed in dry and ventilate places.
(3) Before operation, cleanse the areas to be cared on the skin of
the customer.
(4) Cover the eyes of the customer to prevent them from hurt by the
light beams emitted from the probe.
(5) Make sure the probe contacting with skin for optimal effects.
(6) Contact our service center if it does not work properly. Do not
take apart the machine.
DIAMOND DERMABRASION
The Micro-crystal Dermabrasion was designed by Italian Florence's
Mattioli at first, until now had over 20 years’ history. This kind
of technology only supplies to the dermatology expert and doctor at
first uses, but more and more SPA House & Beauty Saloon also
gradually uses, it was called the best method of medical beauty.
This method successfully has developed in Europe for several years,
cures patient thousands of examples, and has obtained the extremely
satisfactory effect.
Now we want to introduce the Diamond Dermabrasion, it is a creative
improvement of the Micro-crystal Dermabrasion. The Diamond
Dermabrasion provided a non-surgical skin refinish procedure, by
using sterile diamond heads to abrade or rub off the top skin
layer, then Vacuuming out the particles along with any dirt and
dead skin back up. This procedure removes skin debris,
imperfections, blemishes, wrinkles and unwanted pigmentation on the
skin. Moderate usage of Diamond Dermabrasion, accompany with skin
products that penetrate through top skin layer that reach the
dermis level, helps to replenish natural nutrients, restore cell
activity, and promote skin health. The results after Micro
Dermabrasion treatment is usually a healthy, glowing, beautiful
skin.
Preparation before treatment
1. A consultation included the examination of the skin, a plan for
treatment.
2. Operator should wear vinyl gloves and a facemask.
3. On oily or acne skin, a steamer may be used prior to the
treatment, or a degreasing lotion may be applied prior to the
cleanser.
4. Cleansing the skin with Cleansing gel or water, then wipe off
with cotton pad. Allow the skin to dry.
Operating Instruction for Diamond Dermabrasion
1. Push in the movable ring of copper nozzle at the hand piece, and
pull out the 6x4 size vacuum hose. Then push in the black plastic
ring on the vacuum hose.
2. Put a drop of cream or milk lotion on the vacuum hose nozzle,
push in the movable ring and insert in the vacuum hose to the
limit.
3. Insert a cotton swab into the Diamond Head, then tight up the
Diamond Head on the hand piece. Remove the cotton swab after every
treatment.
4. Turn on the power switch.
5. Adjust the Vacuum intensity by Vacuum Regulator according to the
following reference table, the intensity displays on Vacuum gauge
and check with the client for comfort.
6 Use the incline area of Hand piece to contact with the skin
surface. Proceed with a slow sliding motion. Do not place the hand
piece at one spot for too long, doing so will cause harm to the
skin.
7. Adjust the crystal flow rate by the Vacuum Regulator slowly from
minimum to maximum. For commonly use, do not set the flow rate to
maximum unless it is of necessity. This is for better
comfort intensity.
8. Gently stretch the skin with thumb and finger and glide the
Hand-piece 2 to 3 times over the area being treated. Then cross
again in different directions to prevent streaking lines as in the
reference picture. Brush strokes or polishing motions may be used
in different sites.
Do not use on these areas:
1. Sensitive Skin
2. Skin Rash
3. Damaged, Inflamed, or Infected Skin.
4. Surgical scar less than 12 months old.
5. Skin Swollen.
6. The probes can not point to Eye ball.
7. Genitals.
HIGH PRESSURE AIR COMPRESSOR
The super-pressure compressor is characterized by that it
simultaneously uses liquid piston, solid piston, cylinder with
specific structure, aspirating valve and exhaust valve, and makes
them ingeniously combine together so that it can change a
normal-pressure gas to high-pressure gas through one compression
treatment. Said invented compressor can be used for synthesizing
superhardness diamond in high-pressure reactor by high-pressure
method with argon gas coming to about 100000 atm. (i.e.
pressure-raising working). Besides, it can also be used for
compression of other gases.
OZONE OURPUT
Ozone Functions:
① Killing the multiplication of bacteria: ozone could kill up to
the PEA 99.99 percent more than for Staphylococcus aureus, E. coli,
Salmonella typhimurium, dysentery-fu's, the killing rate of Vibrio
cholerae can be 100%.
② Killing Bacillus: Under certain conditions, Ozone can kill the
black variant of Bacillus up to 99.99%.
③ Killing virus: Ozone can be a variety of inactivated virus, such
as hepatitis B surface antigen inflammation of the ozone titer of
30 minutes can reduce half of the hepatitis A virus antigen
destruction of 100 percent, with 0.5 PPM ozone in the air can be
inactivated A 99% of influenza virus, when the ozone concentration
of 0.13% mg / I can be completely inactivated polio virus type I.
According to information abroad when the concentration of 4 mg / L,
could be titer was 106 CID50/mI all the inactivated HIV, the virus
titer dropped six pairs of values.
④ Killing fungi: Ozone inactivation of a variety of fungal effects
are good, such as the gross mold, Qinghei bacteria, fungi, such as
Aspergillus and could kill up to 100%.
To whom is not allowed:
① Pregnant woman;
② Bronchitis;
③ Psychopath;
④ Hypertension and cardiopathy sufferer;
⑤ Other invalid.(Suggest using normal cleaning ways.)
Product services and Maintenance
1. The warranty date is one year from the date of purchasing. We
are responsible for the repairing and the maintenance the device
when the warranty date is expired, but we will charge the service
fee or the cost of the component.
2. We do not responsible for the free warranty as the situation as
following:
A. The failure caused by open the machine without any authorization
by the distributor or the manufacturer. Or modification of the
product in private.
B. The failure caused by dropping sown the machine.
C. The failure caused by unreasonable maintenance.
D. The failure caused by incorrect operation, not following the
direction of the instruction.
3. We keep the rights to modify the system without notice.