Add to Cart
Best prices High efficiency heat pump air to water
AW20-DNNNS, HISEER air-source heat pump, often used in moderate
climates, moves energy from the air into the building for heating
or cooling and domestic hot water. Even at temperatures as low as
-20˚C, an air source heat pump can supply significantly more energy
than it uses – and with no local C02 emissions, it helps reduce
impact on the environment.
HISEER AW20-DNNNS heat and cool system with stainless steel
cabinet, 380-415V/3/50Hz, all year round used, energy saving heat
pump: heats & cools your house as well as offers domestic hot
water.
HISEER heat pumps adopt the following world famous parts:
Heat pumps are measured by their coefficient of performance (COP). The COP for air source heat pumps is very similar to that for ground source heat pumps at approximately 2-4. With a COP for instance of 4, 4 units of heat are produced for every 1 unit of electricity consumed. (The three free units of heating were extracted from the outside air). Even with ambient air temperatures of -10 to -15 degrees Celsius, an air source heat pump can extract useful heat (i.e. > 1 unit of heat generated per unit of electricity consumed).
Advantages:
AW20-DNNNS technical data
AIR TO WATER HEAT PUMP | AW20-DNNNS | |
Heat output/Power consumption at 7/35℃ | kW | 21.7/5.7 |
Heat output/Power consumption at 7/45℃ | kW | 21.4/6.8 |
Heat output/Power consumption at 7/55℃ | kW | 20.8/8.4 |
Heat output/Power consumption at 2/35℃ | kW | 18.9/5.7 |
Heat output/Power consumption at 2/45℃ | kW | 18.5/6.8 |
Heat output/Power consumption at -7/35℃ | kW | 14.3/5.8 |
Heat output/Power consumption at -7/45℃ | kW | 14.2/6.9 |
Starting current | A | 74 |
Power |
| 380-415V/3PH/50Hz |
Compressor |
| HITACHI scroll |
Condenser |
| Brazed plate heat exchanger |
Nominal flow heating medium | l/s | 1.03 |
Internal pressure drop at nominal flow | kPa | 24 |
Air flow | m3/h | 6000 |
Nominal output fan | W | 440 |
Max outgoing heating medium temperature | ℃ | 55℃ |
Dimensions(HxWxD) | mm | 1050x1300x690 |
Pipe connector |
| DN40 |
Weight | kg | 270 |
The above data is tested by EN14511