12V LiFePO4 Battery Pack For Van 220ah Deep Circle 2000 Times

12V LiFePO4 Battery Pack For Van 220ah Deep Circle 2000 Times

Specification for ABS + PC Housing 12V LiFePO4 Battery Pack For Van 220ah Deep Circle 2000 Times

LiFePO4 Battery Pack BMS Performance

1.Charge protection

When the Battery modules are charged to full, they will communicate with BMU, and the BMU has the capability to turn off the charger or open the main contactor. The battery module itself does not have any switch to disconnect the charger.

2.Balancing

The inter-module balancing circuit is used to compensate slight capacity imbalance between different battery modules in series connection.

3.State of Charge Measurement

Individual cell block voltage and charge/discharge current will be used to monitor the state of charge (SOC) of the battery module. The estimated capacity used for the calculations will be adjusted to meet the capacity of the lowest capacity cell block when the battery system is fully cycled. The state of charge will be adjusted for normal self discharge of the battery system when the unit is not on charge.

4.RS-485 Communication Uplink

RS-485 Communications will be used to communicate with the Battery Management Unit (BMU) or connection to other battery Modules.

5.RS-485 Communication Downlink

RS-485 Communication connection from Downstream battery module.

6.Status LED

A Dual LED on module to indicate working status. One is green and the other one is red. Blinking of the green LED indicates that the module is working properly. Blinking of the red LED indicates that the module has failure and needs service.

Application

1. Communication and signal systems such as telecommunication,
2. solar light , solar lamp ,
3. Electric power system and nuclear power plant, energy storage of solar and wind power generation; e-v and E-car
4. UPS, medical equipment, and emergency illumination etc.

Packing Detail For ABS + PC Housing 12V LiFePO4 Battery Pack

Production Picture (refer )

Standard Module for Lifepo4 26650

TAC can support capacity and voltage with standard module

the voltage from 3.7v to 72v

the capacity from 3300mah to 300ah

About HK TAC

Our company approved by ISO and many model have passed IEC UL un38.3 Reach, BIS etc

Our Production Line

Maybe you are interested more model for E-V , E-Car

Guangzhou Sunland New Energy Technology Co., Ltd. (Sunland Power) is a senior professional service provider of battery application. Aiming at serving industrial users, it is dedicated to providing industrial users with optimized battery supporting solutions and safe, environmental friendly and cost-effective battery products.
It has a R & D, engineering and management team with more than 10 years of industry experience
From upstream to downstream, the battery industry has the advantage of vertical integration
Specializing in batteries, battery packs, battery management systems and energy solutions
The products are widely used in medical devices, coal mine security, electronic appliances, power supply and standby energy storage system. For example, the power supply system of electric bicycle; Solar energy storage power supply system, UPS backup power supply system. At the same time, it is also an ideal choice for vehicle starting power supply, military painting and other fields.
We provide professional design and customization services according to the special needs of customers.