High Power Polymer Li-Ion Cell 8Ah 1064145-30C for Rob Hobbies
Brand Name:TAC
Certification:IEC62133, UL1642 ,ROHS
Model Number:1064145HP-8AH 3.7V
Minimum Order Quantity:500pcs
Delivery Time:15-20day after order
Payment Terms:T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Guangzhou China
Address:
No.27 BOWANG Street ,Nan Cun Town, Panyu, Guangzhou, GD,China
Supplier`s last login times:
within 30 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
High Power Polymer Li-Ion Cell: 3.7V 8Ah (1064145-30C) for Rob Hobbies
Specification:
| No. | Items | Specification | Remark |
| 1 | Nominal Capacity | 8Ah | 0.2C Standard discharge |
| 2 | Nominal Voltage | 3.7V | Mean Operation Voltage |
| 3 | Voltage at end of Discharge | 3.0V | Discharge Cut-off Voltage |
| 4 | Charge Voltage | 4.2V±0.03V | By standard charge method |
| 5 | Cell Internal Impedance | ≤300Ω | |
| 6 | Maximum charge current | 30C | For continuous charging mod |
| 7 | Maximum discharge current | 50C | For continuous discharge mod |
| 8 | Operation Temperature Range | Charge:0~45℃ | 60±25%R.H. Bare Cell |
| Discharge:-20~60℃ | |||
| 9 | Storage Temperature Range | Less than 1 year: -20~25℃ | 60±25%R.H. at the shipment state |
| less than 3 months: -20~40℃ | |||
| 10 | Weight | Approx: 8g | Finished Cell |
| 11 | Pack Dimension | Height 64mm*Width105mm Thickness 1.0 mm | Initial Dimension |
Mechanical characteristics and Safety Test
Item | Battery Condition | Test Method | Requirements |
Crush | Fresh, Fully charged | Crush between two flat plates. Applied force is about 13kN(1.72Mpa) for 30min. | No explosion, No fire |
Short Circuit | Fresh, Fully charged | Each test sample battery, in turn, is to be short- circuited by connecting the (+) and (-) terminals of the battery with a Cu wire having a maximum resistance load of 0.1Ω.Tests are to be conducted at room temperature(20±2℃ ). | No explosion, No fire The Temperature of the surface of the Cells are lower than 150℃ |
Short Circuit | Fresh, Fully charged | Each test sample battery, in turn, is to be short- circuited by connecting the (+) and (-) terminals of the battery with a Cu wire having a maximum resistance load of 0.1Ω.Tests are to be conducted at temperature(60±2℃ ). | No explosion, No fire The Temperature of the surface of the Cells are lower than 150℃ |
Impact | Fresh, Fully charged | A 56mm diameter bar is inlayed into the bottom of a 10kg weight. And the weight is to be dropped from a height of 1m onto a sample battery and then the bar will be across the center of the sample. | No explosion, No fire |
Forced Discharge | Fresh, Fully charged | Discharge at a current of 1 C5A for 2.5h. | No explosion, No fire |
Nail Pricking | Fresh, Fully charged | Prick through the sample battery with a nail having a diameter of 3mm and remain 2h. | No explosion, No fire |
Packing for High Power Polymer Li-Ion Cell 8Ah 1064145-30C for Rob Hobbies
Handling of Cells
Consideration of strength of film package
Soft Aluminium foil
Easily damaged by sharp edge parts such as pins and needles, Ni-tabs, comparing with metal-
can-cased LIB.
Sealed edge may be damaged by heat above 100°C, bend or fold sealed edge.
Prohibition short circuit
Never make short circuit cell. It generates very high current which causes heating of the cells
and may cause electrolyte leakage, gassing or explosion that are very dangerous.
The LIP tabs may be easily short-circuited by putting them on conductive surface.
Such outer short circuit may lead to heat generation and damage of the cell.
An appropriate circuitry with PCM shall be employed to protect accidental short circuit of the
battery pack.
Mechanical shock
LIP cells have less mechanical endurance than metal-can-cased LIB.
Falling, hitting, bending, etc. may cause degradation of LIP characteristics.
Handling of tabs
The battery tabs are not so stubborn especially for aluminum tab.
Don’t bend tab.
Do not bend tabs unnecessarily.
Similar Polymer Battry Picture for LiPO battery 3.7V 16AH High power 20C discharge li-ion battery for UAV
High Power Polymer Li-Ion Cell 8Ah 1064145-30C for Rob Hobbies
Inquiry Cart
0