1 - 10 Results for threaded studs pins from 5485 Products
500V MIL-DTL-38999 Series Ⅲ Plug Connector For Military D38999/26FC98SN Electroless Nickel 10 Female Pins.8D Series.
500V MIL-DTL-38999 Series Ⅲ Plug Connector For Military Applications.D38999/26FC98SN .Electroless Nickel.10 Female Pins. Part Number:D38999/26FC98SN Product Description: Product Overview: MIL-DTL-38999 Series 3 The MIL-DTL-38999 Series 3, also known as Military Detail 38999 Series 3, is a high-performance threaded coupling type connector designed for use in military and aerospace applications. It is a part of the MIL-DTL-38999 family of...
KAIDA HOLDING LIMITED
Verified Supplier
Building 8, Zijin Industry Park, No.18 Fenghua Road, Nanjing City, Jiangsu Province, China
Coppered Steel Threaded Stud Welder Pins 1/4" For Capacitor Discharge Welder >>> Introduction To The Stud Welder Pins Stud Welder Pins are designed to be welded to thin gauge sheet material using tip ignition according to the capacitors discharge welding process. Stud Welder Pins are available in many different sizes, from a base diameter of a 2 mm stud up to 12 mm. Standard material for Stud Welder Pins are: Copper Plated Steel, Stainless Steel...
Huihao Hardware Mesh Product Limited
Verified Supplier
No.265 of zhongshan road ,shijiazhuang city ,heibei province ,china 050000
Slotted Thread Rod Metric Partially Threaded Studs Full Thread Rod Carbon Steel Or Stainless Steel ZP YZP BLACK HDG Screw the threaded end of these metric studs into a tapped hole and use the unthreaded end as a pivot point, hinge, shaft, or locator pin. All can be installed and adjusted by hand or with a slotted screwdriver. These studs are steel for strength and wear resistance. They’re best for dry environments, since moisture will cause them...
Flanged No Thread Stud Welding Pins 0.312" Length Used Drawn Arc Stud Welder
Flanged No Thread Stud Welding Pins 0.312" length used Drawn Arc Stud Welder >>> Introduction To The Stud Welding Pins Flanged / No Thread Diameter "D" Flange* Diameter "FD" Minimum Length "L" .115 .187 .312 .125 .187 .312 .141 .218 .312 .156 .250 .312 .161 .250 .375 .187 .250 .500 .215 .312 .625 .250 .312 .625 .274 .375 .750 .312 .375 .750 .375 .437 .750 * Approximate values,Contact us if you have a special requirement. Low Carbon Steel...
Huihao Hardware Mesh Product Limited
Verified Supplier
No.265 of zhongshan road ,shijiazhuang city ,heibei province ,china 050000
Grade 4.8/8.8/10.9/12.9 MOQ 1000 Pieces Threaded Stud Bolts with Polishing
Product Description: Threaded Socket Bolts, Threaded Studs Bolts, Threaded Connector Bolts, Threaded Pin Bolts are a type of fastener widely used in engineering and construction. These bolts are characterized by having Unified Coarse Thread, and are usually produced with sizes ranging from M6 to M20. The surface treatment is usually polishing, and a minimum order quantity of 1000 pieces is required to obtain the ISO9001 certificate. The main...
Capacitor Discharge Threaded Stud Welder , CD Stud Welding Machine For Weld Stud
Capacitor Discharge Threaded Stud Welder , CD Stud Welding Machine for Weld Stud Product Description: Threaded Stud Welder , CD Stud Welding Machine Technical features : The utility model has the advantages of novel design, compact structure, reliable use, stepless regulation of charging voltage,large regulating range and convenient adjustment of various parameters. This is the use of capacitor discharge welding machine, fast to insulation nails...
Huihao Hardware Mesh Product Limited
Verified Supplier
No.265 of zhongshan road ,shijiazhuang city ,heibei province ,china 050000
DIN 976 Fasteners Stud Bolts Metric Thread Fully Threaded Studs
DIN 976 Fasteners Stud bolts Metric thread Fully Threaded Studs Continuous Threaded Stud Bolts (Fully Threaded Studs without Chamfered Ends) Stud Bolts with uniform threads over the length are termed as continuous thread stud bolts. This type usually does not carry a chamfered end. Material Option INCONEL Inconel® 600, UNS N06600, DIN EN 2.4816 Inconel® 601, UNS N06601, DIN EN 2.4851 Inconel®625, UNS N06625, DIN EN 2.4856 Inconel®718, UNS N07718,...