1 - 10 Results for tang bar reinforcement from 2024 Products
Customizable Thread Steel Bar Reinforced Hot Rolled Iron Rod Steel Rebars
Customizable Steel Bar Reinforced Hot Rolled Iron Rod Steel Rebars Specification: Product Name Rebar Steel Bar Length Customer's Requirement Width Customer's Requirement Diameter Customized Packing Bundle, or with all kinds of colors PVC or as your requirements Standard AISI, ASTM, BS, DIN, GB, JIS Processing Service Bending, Welding, Decoiling, Cutting, Punching Technique Steel Rebar Iron Rod Sample Sample Freely Material Q195, Q235, Q345; ASTM...
Chengju (shenzhen) Information Technology Co., Ltd.
Verified Supplier
广东深圳
Precision 410 Stainless Steel Bar Reinforcement 5800mm HL For Construction
Precision Stainless Steel Bar For Machining And Fabrication Stainless steel bars are often selected for applications where durability, strength, and resistance to wear and tear are essential. These bars can be used in high-temperature applications due to their resistance to heat. They can be machined and fabricated to meet specific requirements, such as threaded ends, grooves, and chamfers. Stainless steel bars are available in a variety of...
Tisco Group Steel Co., Ltd
Verified Supplier
East Steel City, No. 118, Beihuan Road, Xishan District, Wuxi City, Jiangsu Province, China
12mm High Yield Strength Deformed Bars Reinforcing
12.6MM PRESTRESSED CONCRETE STEEL BAR 1, Technical parameters of PC BAR Nominal diameter 7.1mm 9.0mm 10.7mm 12.6mm Production standard MS1138:PART 3,JIS G 3137:2020,GB/T 5223.3-2005,SNI 7701:2016 Tensile strength ≥ 1420Mpa Yield strength ≥ 1280Mpa Elongation ≥ 7.0% Relaxation ≤ 2.0% Straightness ≤ 2mm/m Material 30MnSi Weight per coil 1ton-2ton 2, Chemical composition (%) of PC BAR –Material 30MnSi C Si Mn P(Max) S(Max) Cu(Max) 0.28-0.33 0.60-0...
12mm High Yield Strength Deformed Bars Reinforcing
12.6MM PRESTRESSED CONCRETE STEEL BAR 1, Technical parameters of PC BAR Nominal diameter 7.1mm 9.0mm 10.7mm 12.6mm Production standard MS1138:PART 3,JIS G 3137:2020,GB/T 5223.3-2005,SNI 7701:2016 Tensile strength ≥ 1420Mpa Yield strength ≥ 1280Mpa Elongation ≥ 7.0% Relaxation ≤ 2.0% Straightness ≤ 2mm/m Material 30MnSi Weight per coil 1ton-2ton 2, Chemical composition (%) of PC BAR –Material 30MnSi C Si Mn P(Max) S(Max) Cu(Max) 0.28-0.33 0.60-0...
Steel Bar / Reinforcing Concrete Welded Wire Mesh Welding Equipment (2.5M Width) Product description: 1. The machine is used for wire diameter 5-12mm, it is an automatic equipment that desiged and manufactured by ourselves. Both the line wire and cross wire are feed from pre-cut wire, the controlling system adopts PLC control; the machine adopts servo motor to pull the mesh panel repeat. 2. The machine uses PLC touch screen control technique, we...
ANPING MOLONGGANG SPOT WELDING EQUIPMENT COMPANY LIMITED
Verified Supplier
Wire Mesh Industry Zone, Anping County,Hengshui City,Hebei Province.China
Steel Bar / Reinforcing Concrete Welded Wire Mesh production Line
Steel Bar / Reinforcing Concrete Welded Wire Mesh production Line Product description: 1. The machine is used for wire diameter 5-12mm, it is an automatic equipment that desiged and manufactured by ourselves. Both the line wire and cross wire are feed from pre-cut wire, the controlling system adopts PLC control; the machine adopts servo motor to pull the mesh panel repeat. 2. The machine uses PLC touch screen control technique, we use Japan, Sony...
ANPING MOLONGGANG SPOT WELDING EQUIPMENT COMPANY LIMITED
Verified Supplier
Wire Mesh Industry Zone, Anping County,Hengshui City,Hebei Province.China
CUTCNC gasket cutting machine is widely used in valve and pipeline industry to cut various gasket materials, such as asbestos, non-asbestos, PTFE(Teflon), rubber, graphite tanged Insert (stainless steel inserted). Some graphite tanged insert reinforced gasket samples Functions: ◇It can cut many different materials (such as corrugated paper, leather,card paper, offset paper, grey board, compound materials, gasket and textile) ◇It can fold...
Perforated Tanged Metal Reinforcement Graphite Advanced Digital Cutting Machine
Perforated Tanged Metal Reinforcement Graphite Advanced Digital Cutting Machine CUTCNC gasket cutter machine can cut most common gaskets made of steel graphite, rubber, non-asbestos,etc. No need to make dies, we cut custom gasket and short run production directly. Even for irregular gasket, our machine ensures high precision. Typical gasket samples cut by our advanced cnc cutter Specifications Effective cutting area 2500*1600mm 1700*1300mm 1300...
Steel Bar / Reinforcing Concrete Welded Wire Mesh Welding Equipment (2.5M Width) Product description: 1. The machine is used for wire diameter 5-12mm, it is an automatic equipment that desiged and manufactured by ourselves. Both the line wire and cross wire are feed from pre-cut wire, the controlling system adopts PLC control; the machine adopts servo motor to pull the mesh panel repeat. 2. The machine uses PLC touch screen control technique, we...
ANPING MOLONGGANG SPOT WELDING EQUIPMENT COMPANY LIMITED
Wire Mesh Industry Zone, Anping County,Hengshui City,Hebei Province.China
Steel Bar / Reinforcing Concrete Welded Wire Mesh production Line
Steel Bar / Reinforcing Concrete Welded Wire Mesh production Line Product description: 1. The machine is used for wire diameter 5-12mm, it is an automatic equipment that desiged and manufactured by ourselves. Both the line wire and cross wire are feed from pre-cut wire, the controlling system adopts PLC control; the machine adopts servo motor to pull the mesh panel repeat. 2. The machine uses PLC touch screen control technique, we use Japan, Sony...
ANPING MOLONGGANG SPOT WELDING EQUIPMENT COMPANY LIMITED
Wire Mesh Industry Zone, Anping County,Hengshui City,Hebei Province.China
Submit “tang bar reinforcement” inquiry
This supplier has been verified by Everychina.com. Our verification process includes: 3 on-site visits by Everychina.com's service team!