Business license check OK
1 - 10 Results for signal converter din from 6541 Products
LS-TD4015 6ch RTD signal Convert to RS485 PT100 to RS485 Temperature Transmitter Din Rail Mounting
Signal Converter 6ch RTD signal Convert to RS485 PT100 to RS485 Temperature Transmitter General Introduction The LS-TD4015 is an industrial grade standard RTD acquisition product that supports PT100, PT1000, Cu50, Cu100, Ge53, BA1, BA2, R5000 and R500 6-channel three-wire RTD inputs. RS485 interface is optoelectronic isolated. AD acquisition part is also modulus optoelectronic isolated. It adopts standard MODBUS RTU protocol. Complaint with...
Shenzhen Qianhai Lensen Technology Co., Ltd
Verified Supplier
701, Yongchang Building, Xicheng Industrial Zone, Xixiang, Bao'an District, Shenzhen, China 518126
LS-THG-IP Series Current Input Signal Converter Din Rail Mounting DC24V Power Supply
Input Input signal: 4-20mA; 0-20mA Distribution voltage: 24V, (maximum drive current 30mA) Input impedance: ≤50Ω Output Output signal: 4-20mA; 0-20mA; 0-5V; 0-10V Output load resistance: RL ≤ 500Ω (when the output is a current signal); RL ≥ 10KΩ (when the output is a voltage signal) Basic parameters Power supply: DC24V, ±10% Current consumption: ≤50mA (one input and one output, 24V power supply, power distribution input, 20mA output); ≤70mA (one...
Shenzhen Qianhai Lensen Technology Co., Ltd
Verified Supplier
701, Yongchang Building, Xicheng Industrial Zone, Xixiang, Bao'an District, Shenzhen, China 518126
0.27lb Emerson Rosemount Transmitter 333 HART® Tri-Loop™ Signal Converter Hart Tri Loop 333u
Rosemount 333 HART® Tri-Loop™ Signal Converter 333U With the Rosemount 333 HART Tri-Loop Signal Converter, you can easily obtain up to three additional analog outputs. This signal converter is designed to convert a digital HART multivariable signal into three independent 4-20 mA analog process variables without additional transmitters and wiring. Available as a high-alarm or low-alarm device, this product also offers DIN rail mount options and...
SC Automation Limited
Verified Supplier
Room 206, Unit 3, Building 13, Airongyuan, Zhaoshang Street, Nanshan District, Shenzhen,China.
24V DC Power Supply Analog Signal Converter RS485 RS232 interface
24V DC Power Supply Analog Signal Converter RS485 RS232 Interface LS-WJ31 Analog signal to RS232/RS485 Converter Features: Features: RS-485/232 interface, isolation convert standard analog signal output Analog signal output accuracy is better than 0.2% Can calibrate module output accuracy Signal output / communication interface isolation voltage 3000VDC Wide supply range: 8 ~ 32VDC High reliability, easy programming, easy to install and wiring...
Shenzhen Qianhai Lensen Technology Co., Ltd
Verified Supplier
701, Yongchang Building, Xicheng Industrial Zone, Xixiang, Bao'an District, Shenzhen, China 518126
The cost and testing cycle of FCC ID authentication for wireless charging ROHS Certification REACH
charger is a device that uses the principle of electromagnetic induction for charging. Its principle is similar to that of a transformer. By placing a coil at the transmitting and receiving ends, the transmitting end coil sends electromagnetic signals to the outside world under the action of electricity. The receiving end coil receives the electromagnetic signal and converts it into current, thereby achieving the purpose of wireless charging....
Shenzhen ZKT Technology Co., Ltd.
No. H, 2nd Floor, 1st Building, Quanzhi Technology Innovation Park, Shasong Road, Houting, Shajing Street, Bao’an District, Shenzhen, China
Submit “signal converter din” inquiry
This supplier has been verified by Everychina.com. Our verification process includes: 3 on-site visits by Everychina.com's service team!
Business license check OK
