Business license check OK
1 - 10 Results for mold steel plate from 128261 Products
ASTM Mold Steel Plate Hot Die Steel Plate H13 Fatigue Resistant
ASTM Steel Mold Steel Plate Tool Steel Hot Die Steel H13 1.2344 Description MOLD BASE FRAMES, MOLD CAVITIES, MOLD CORES Usually cut from a pre-hardened die, mold, or tool steel such as 4140 PH, 4340 PH, or P20, mold base frames normally separate into two sides at a parting line allowing manufactured parts to be extracted. PGI Steel makes molding plates from 4140 and 4340 steel, typically in the Rockwell hardness ranging from 28 – 32 to upward of...
Henan Jinbailai Industrial Co., Ltd.
Verified Supplier
A171, Building 4, No. 206, West Fourth Ring Road, High-tech Industrial Development Zone, Zhengzhou City, Henan Province
JIS S45C Mold Steel Plate 100mm-12000mm Carbon Steel Plate For Die Casting
JIS S45C Carbon Steel Mold Steel Plate For Die Casting Mold Base Descriptiion What is S45C steel? AISI 1045 is a medium tensile low hardenability carbon steel generally supplied in the cold drawn or turned and polished condition, with a typical tensile strength range 600 – 950 Mpa and Brinell hardness range 179 – 280. in either condition. Characterised by good strength and impact properties, with good machinability and reasonable weldability in...
Henan Jinbailai Industrial Co., Ltd.
Verified Supplier
A171, Building 4, No. 206, West Fourth Ring Road, High-tech Industrial Development Zone, Zhengzhou City, Henan Province
Die Plastic Mold Steel Plate DIN X40crmov51 AISI H13
Die Plastic Mold Steel Plate In DIN X40crmov51 AISI H13 Description Steel molding dies allow manufacturers to shape pliable raw materials, such as ceramic materials, composite materials, metals, plastic materials, rubber, and material liquid mixtures through compression, injection, and pressure molding processes. These steels can handle the high melting points of the composite liquids or resins poured into these forming cores. Typically, a...
Henan Jinbailai Industrial Co., Ltd.
Verified Supplier
A171, Building 4, No. 206, West Fourth Ring Road, High-tech Industrial Development Zone, Zhengzhou City, Henan Province
D2 Tool Mold Steel Plate 1055 0.2mm-400mm Thickness With Black Surface
D2 Tool With Black Surface D2 Steel Mold Steel Plate Description 1055 steel is an unalloyed medium carbon engineering steel which has 0.52%-0.6% Carbon as per EN10083 standard.It will obtain high hardness and high strength after hardening due to the relatively high carbon content,and also can be flame or induction hardened to surface hardness Min 58HRC.C55 steel is generally supplied in an untreated or normalised condition. Item ASTM Steel Mold...
Henan Jinbailai Industrial Co., Ltd.
Verified Supplier
A171, Building 4, No. 206, West Fourth Ring Road, High-tech Industrial Development Zone, Zhengzhou City, Henan Province
1.2343 Mold Steel Plate 4Cr5Mosiv Die H11 Hot Work Tool Steel
H11 1.2343 4Cr5Mosiv Hot Work Die Mold Steel Plate Description (5) The advantage of repair welding is that the preheating and post-heating temperatures are lower than those of SKD11, so repair welding is easier. Features: General cold-work dies steel, high hardness, and high toughness. (4) Advantages in surface hardening treatment, the surface hardness after surface hardening treatment is higher than that of SKD11, so the performance of the mold...
Henan Jinbailai Industrial Co., Ltd.
Verified Supplier
A171, Building 4, No. 206, West Fourth Ring Road, High-tech Industrial Development Zone, Zhengzhou City, Henan Province
1.2738 718 P20 Ni Alloy Mold Steel Plate SGS Hot Rolled Plate
1.2738 718 P20+Ni Alloy Special Mold Steel Plate Description AISI D2 is recommended for tools requiring very high wear resistance, combined with moderate toughness (shock-resistance). AISI D2 can be supplied in various finishes, including the hot-rolled, pre-machined and fine machined condition. AISI D2 is a high-carbon, high-chromium tool steel alloyed with molybdenum and vanadium characterized by: - High wear resistance - High compressive...
Henan Jinbailai Industrial Co., Ltd.
Verified Supplier
A171, Building 4, No. 206, West Fourth Ring Road, High-tech Industrial Development Zone, Zhengzhou City, Henan Province
H13 1.2344 Mold Steel Plate Flat Bar Special Alloy High Strength
H13 1.2344 SKD61 Flat Bar Special Alloy Mold Steel Plate For Die Casting Descriptiion 1. Features a. Electroslag remelting steel, high purity, good resistance to dissolve; b. Organizational structure of uniform, better heat resistance with good toughness, high temperature resistance metal erosion; c. Good resistance to high temperature tempering performance, hardness steady working under 600ºC, dimensional accuracy stability durability; d. Cold...
Henan Jinbailai Industrial Co., Ltd.
Verified Supplier
A171, Building 4, No. 206, West Fourth Ring Road, High-tech Industrial Development Zone, Zhengzhou City, Henan Province
Skh-9 M2 M42 Mold Steel Plate Cr12MoV 0.2mm-400mm Wall Thickness
Skh-9 M2 M42 High Speed Work Steel Cr12MoV Mold Steel Description MOLD BASE FRAMES, MOLD CAVITIES, MOLD CORES Usually cut from a pre-hardened die, mold, or tool steel such as 4140 PH, 4340 PH, or P20, mold base frames normally separate into two sides at a parting line allowing manufactured parts to be extracted. PGI Steel makes molding plates from 4140 and 4340 steel, typically in the Rockwell hardness ranging from 28 – 32 to upward of 38 – 45....
Henan Jinbailai Industrial Co., Ltd.
Verified Supplier
A171, Building 4, No. 206, West Fourth Ring Road, High-tech Industrial Development Zone, Zhengzhou City, Henan Province
DIN 1.2344 Mold Steel Plate 110mm-12000mm Long Heat Resistant
Mold Steel 1.2344 H13 SKD61 Steel Plate And Sheet Description SKD61 Steel is used widely for medium-run cold-work tools and dies, for plastic-molding dies, for shear blades, for medium hot-work dies, for master hobs, and for component parts of many products. It is recommended for both hot and cold shock applications such as rivet sets, chisels, punches, moil points, hot headers and gripper dies. S7 is also suited for short-run dies used in...
Henan Jinbailai Industrial Co., Ltd.
Verified Supplier
A171, Building 4, No. 206, West Fourth Ring Road, High-tech Industrial Development Zone, Zhengzhou City, Henan Province
Vacuum Cleaner P20 Plastic Mold Steel Plate 810mm Wide
P20 / 1.2311/ 3CR2MO Plastic Mold Steel Plate Description Plastic mold includes thermoplastic mold and thermosetting plastic mold. The steel for plastic mould is required to have certain properties such as strength, hardness, wear resistance, thermal stability and corrosion resistance. Application: It is suitable for plastic mould and mould base of TV front shell, telephone set, drinking machine, vacuum cleaner, etc. Thermoplastic injection mold,...
DONGGUAN MISUNG MOULD STEEL CO.,LTD
Verified Supplier
Postal code is 523196, No.8 shanghe precinct, wangniu dun town , dongguan city. Guangdong province China
Submit “mold steel plate” inquiry
This supplier has been verified by Everychina.com. Our verification process includes: 3 on-site visits by Everychina.com's service team!
Business license check OK
