Business license check OK
1 - 10 Results for e1 protocol converter from 737 Products
RS232 To E1 Protocol Converter With Plastic Shell And 600W Surge Protection
RS-232 to E1 Converter with Plastic Shell Introduction: E232 interface converter supports the conversion between E1 interface which accord with the ITU-T G.703 standard and RS-232 interface, it can receive synchronous data of 2.048Mbps from E1 network, and transmit the data to ROUTER or other devices. The mode of interface is DCE, and it can be connected with DTE or DCE devices. Features: 1. Convert RS232 interface to E1(2M unframed G.703)...
3onedata Co., Ltd.
Verified Supplier
3/B, Zone 1, Baiwangxin High Technology Industrial park,Song Bai Road, Nanshan District, Shenzhen, 518108, China
Industrial Protocol Converter Gateway
Industrial Protocol Converter Gateway 1 . Descriptions: An industrial protocol converter gateway, also known as an industrial protocol gateway or simply a protocol converter, is a device or software application that enables communication between different industrial automation systems and devices that use different protocols. Industrial protocols are specific sets of rules and standards that govern how devices communicate and exchange data in...
Guangzhou Andea Electronics Technology Co., Ltd.
Verified Supplier
Room 401, Building H, Jingye 3rd Street, Yushu Industrial Park, Economic And Technological Development Zone, Guangzhou 510663
DNT A Series E1 Protocol Converter , Multipoint Aggregation E1 Converter Fiber STM1 SFP
DNT A Series E1 Protocol Converter , Multipoint Aggregation E1 Converter Fiber STM1 SFP Overview Global Tech EoP, Ethernet over PDH, Aggregation Interface Converter is mainly deployed for Ethernet data transparent transmission over 1 up to 16, or 1 up to 63, E1 channels, and can support maximum 155Mb/s bit rate. Fully complied with GFP recommendations as G.7041, G.7042, G.7043 and G.8040, the Aggregation Interface Converter can cooperate with the...
Guangdong Global Telecommunication Technology Co., Ltd.
No.75-78 Pacific Industrial Zone,Xintang Town, Zengcheng Area, Guangzhou, China (510660)
RS232 To E1 Protocol Converter With Plastic Shell And 600W Surge Protection
RS-232 to E1 Converter with Plastic Shell Introduction: E232 interface converter supports the conversion between E1 interface which accord with the ITU-T G.703 standard and RS-232 interface, it can receive synchronous data of 2.048Mbps from E1 network, and transmit the data to ROUTER or other devices. The mode of interface is DCE, and it can be connected with DTE or DCE devices. Features: 1. Convert RS232 interface to E1(2M unframed G.703)...
3onedata Co., Ltd.
3/B, Zone 1, Baiwangxin High Technology Industrial park,Song Bai Road, Nanshan District, Shenzhen, 518108, China
1 To 16 E1 Protocol Converter Comprehensive Alarm Indicators Dynamic Bandwidth Allocation
1 To 16 E1 Protocol Converter Comprehensive Alarm Indicators Dynamic Bandwidth Allocation Overview Global Tech DNT-RS Series GFP EoP, Ethernet over PDH, Interface Converter can transport GFP encapsulated Ethernet service over 1 up to 16 E1 channels. Fully comply with G.7041, G.7042, G.7043, and G.8040 recommendations, GFP Interface Converter can cooperate with the products from other manufactures adopted the same recommendations. GFP Interface...
Guangdong Global Telecommunication Technology Co., Ltd.
No.75-78 Pacific Industrial Zone,Xintang Town, Zengcheng Area, Guangzhou, China (510660)
G.703 interface converter E1 to Ethernet protocol converter with RS232 data , AC or DC power supply
E1 to Ethernet protocol converter with RS232 data FC-PCE2 interface converter is, providing one framed E1 interface, one Ethernet interface and 2 serial interfaces to achieve 10/100Base-T Ethernet data transmission on the E1 channel.Providing one Ethernet Bridge plus 2 serial interfaces via one E1 interface; Features Provides 16 E1 transparent transmission; The rate of optical port is 155Mbps, transmission range can reach 25KM, 40KM, 60KM, 80KM...
Fibre Easy Communication Service Limited
interface converter Network bridge of E1 to ethernet protocol converter
interface converter Network bridge of E1 to ethernet protocol converter Product Overview E1-4ETH interface converter is based on FPGA.The device provides the transition between ITU-T G.703 (E1) standard unframed E1 interface and 10/100Base-T interface. It is a high capability, self-adaptable long-distance Ethernet bridge.The product is small and with low cost. It is widely used in connecting between WAN and LAN, monitoring, etc Features Can...
Fibre Easy Communication Service Limited
Interface protocol converter 4e1 to Eth With one lan Protocol Converter
Interface protocol converter 4e1 to Eth With one lan Protocol Converter Product Overview: 4e1-fe converteris based on FPGA,using reverse direction multiplexing technology to bundle for multiple E1 circuits to transmit the Ethernet data of 4Channel 100BASE-TX. It can realize1~4 E1 channelto convert between Ethernet optical interface. This devicecan transmit the transceiver signal point to point to Ethernet optical interfaceto make E1 channels...
Fibre Easy Communication Service Limited
Desk-top Interface converter of E1 to rs232 , E1 to RS422 , E1 to RS485 protocol converter
Framed or unframed E1 to rs232 rs422 rs485 protocol converter Overview E1-RS232/422/485 converter is based on FPGA, providing oneE1 interface and a RS232 serial interface, 1Channel RS232 transmission via E1 interface. The product breaks through contradictions between traditional serial interface communication distance and communication rate, besides, it also cansolve electromagnetic interference, ground ring interference and lightning damage....
Fibre Easy Communication Service Limited
FCTEL E1 to 4 Channels 10/100Base-T Ethernet SNMP Managed Protocol Converter
FCTEL E1 to 4 Channels 10/100Base-T Ethernet SNMP Managed Protocol Converter FC-PCE51converter is based on FPGA, providing one framed E1 interface and one Ethernet interface to achieve 10/100Base-T Ethernet data transmission on the E1 channel. It is a high performance, self-learning Ethernet bridge. This device is the extension device of Ethernet, using network (PDH/SDH/Microwave) that provide E1 channel to achieve local and remote Ethernet...
Fibre Easy Communication Service Limited
Submit “e1 protocol converter” inquiry
This supplier has been verified by Everychina.com. Our verification process includes: 3 on-site visits by Everychina.com's service team!
Business license check OK
Hot Products :
