1 - 10 Results for diamond dies pcd from 2038 Products
0.012mm - 1.20mm Mono Natural Diamond Dies Pcd Drawing Die
0.012-1.20mm Mono Diamond Dies, Diamond Drawing Dies 1. Description: We provide Mono Diamond Dies in the size range of 0.012-1.200 mm. These Mono Diamonds are man-made diamonds which are also called as Synthetic Single Crystal Diamond (SSCD). 2. Specification: Size Range Natural Diamond Dies (ND Dies) Mono Diamond Dies (MD Dies) Φ mm Φ inch 0.012 - 0.059 0.0005 - 0.0023 √ √ 0.060 - 0.099 0.0024 - 0.0039 √ √ 0.100 - 0.599 0.0039 - 0.0236 √ √ 0.600...
ME & WE
Verified Supplier
0.01mm - 1.20mm Natural Diamond Dies Pcd Wire Drawing Dies
0.01-1.20mm Natural Diamond Dies, Diamond Drawing Dies 1. Description: We supply Natural diamond dies in the size range of 0.010-1.200mm. Every diamond stone is individually inspected under polarised Microscope and only flawless Diamonds are selected. The rough diamonds are flattened with respect to 111 plane orientation to give every die maximum strength to withstand rough & tough drawing conditions and maximum number of recuts. 2. Specification...
ME & WE
Verified Supplier
0.005MM D30 PCD Wire Drawing Die Polycrystalline Diamond Dies 9MM
PCD Wire Die, polycrystalline diamond dies, Wire Drawing Dies 1. Description: PCD(PolycrystalMne Diamond) is a kind of synthetic diamonds. The carbon molecule forms PCD under ultra high temperature and press. Strong bond between diamond particles make PCD have higher abrasive resistance,hardness as well as good thermal conductivity. PCD wire drawing die is a normal wire tool made by PCD blanks. When pass through a group of PCD dies, the wire...
ME & WE
Verified Supplier
D15 PCD Drawing Dies Polycrystalline Diamond Dies For Soft Hard Wires 0.500 - 1.500mm
D15 PCD Wire Dies, polycrystalline diamond dies, Wire Drawing Dies For Soft Wires and Hard Wires 1. Description: Polycrystalline diamond (PCD) is a kind of artificially sintered diamond,which can be used in all wet drawing and dry drawing processes, polycrystalline diamond high temperature pressing and alloy bond sintering. The maximum recommend hole of D15 is 1.5mm. Polycrystalline diamond (PCD) Wire Drawing Die is the longest die life of all...
ME & WE
Verified Supplier
D6 To D36 Diamond Drawing Dies PCD Polycrystalline Diamond Dies 12.7mm
D6-D36 Polycrystalline Diamond Dies, Diamond Drawing Dies, PCD Dies 1. Description: We manufacture Polycrystalline diamond dies with different kinds of PCD blanks. PCD blanks are available in 2 types - Self supported and Tungsten ring supported. Also different grain sizes of 3, 5, 10, 25 & 50 microns are available. Thermally stable PCD blanks are mounted upto a temperature of 1200°C and these blanks are well suited for hot wire drawing applicatio...
ME & WE
Verified Supplier
D24 PCD Wire Dies Polycrystalline Diamond Dies Wire Drawing
D24 PCD Wire Dies, Polycrystalline Diamond Dies, Wire Drawing Dies 1. Description: The maximum recommend hole of D24 is 4.4mm. PCD(Polycrystalline Diamond) is a kind of synthetic diamonds. The carbon molecule forms PCD under ultra high temperature and press. Strong bond between diamond particles make PCD have higher abrasive resistance,hardness as well as good thermal conductivity. 2. Specifications: inches mm ADDMA Maximum Diameter 0.0039-0.0157...
ME & WE
Verified Supplier
D18 PCD Wire Drawing Die Setup Polycrystalline Diamond Dies
D18 PCD Wire Dies, Wire Drawing Dies, Polycrystalline Diamond Dies 1. Description: PCD Wire Drawing Die has the longest die life of all materials,which can provide the highest production efficiency and reduce downtime. PCD Core is a kind of artificially sintered diamond,which can be used in all wet drawing and dry drawing processes, polycrystalline diamond high temperature pressing and alloy bond sintering. The maximum recommend hole of D18 is 2...
ME & WE
Verified Supplier
Stainless Steel Tubes Pipes Bars PCD Drawing Die Polycrystalline Diamond Dies
Tubes Pipes Bars, PCD Drawing Dies, Polycrystalline Diamond Dies 1. Description: PCD Wire Drawing Die is a normal wire tool made by PCD core. When pass through a group of PCD dies, the wire gradually deforms then becomes thiner and thiner, finally comes to target size. 2. Specifications: inches mm ADDMA Maximum Diameter 0.0039-0.0157 0.100-0.400 D6 0.4 0.0079-0.0315 0.200-0.800 D12 0.8 0.0079-0.0394 0.200-1.000 D12 1.0 0.0197-0.0591 0.500-1.500...
ME & WE
Verified Supplier
Polycrystalline Diamond Composite Wire Drawing Die PCD Blanks
PCD POLYCRYSTALLINE DIAMOND PCD WIRE DRAWING DIE BLANKS FOR PCD CUTTING TOOLS CARBIDE INSERTS BLANKS FOR PCD DIAMOND CHN-TOP Blanks Based on the good cooperation with foreign well-known enterprises and scientific research institutions, after years of digestion, introduction, absorption of foreign advanced technology and ideas, we have successfully developed a whole series of polycrystalline diamond blanks(PCD). And after a long time of testing...
CHN-TOP SCI&TECH CO., LTD.
Verified Supplier
M1 Building, Huang Jin Innovatin Park, Wang Chen area, ChangSha , Hunan China
High Speed Copper Wire Drawing Dies / PCD Drawing Dies For Wire Drawing Machine
High Quality Chinese Brand Wire Drawing Die For Wire Drawing Machine Polycrystalline diamond dies are available in various grain sizes, both in supported and unsupported configurations. PCD dies provide uniform hardness and extended wear resistance in all directions. Polycrystalline diamond (PCD) is a kind of artificially sintered diamond,which can be used in all wet drawing and dry drawing processes,polycrystalline diamond high temperature...
YUYANG MACHINE Co., Ltd.
Verified Supplier
chigang industry , humen town,dongguan city, china
Submit “diamond dies pcd” inquiry
This supplier has been verified by Everychina.com. Our verification process includes: 3 on-site visits by Everychina.com's service team!