Add to Cart
Features of Easy Installation Multi-colored Fiber Glass Wool Insulated Roof Sandwich Panels
1. Our sandwich PU panel is completely incombustible (excellent fireproof performance), has a high degree of endurance, perfect thermal resistance and excellent sound absorption efficiency.
2. It has high rate of endurance and excellent energy-saving performance.
3. There is no formaldehyde in the sandwich PU panel, making it environmentally friendly.
4. The unique spigot and interface design enhances its capability to resist wind pressure.
5. Our sandwich PU panel are elegant in style and come in various models.
6. There is no steel plate heat conduction at the connection point.
7. Two sides of the panel are sealed by polyurethane, to prevent absorption of water by the core materials absorbing water and increasing its durability.
Product description:
1. The width of the sandwich panel is 950mm
2. Upper and lower layer: uses color steel plate
3. Thickness of the color steel plate: 0.3 to 0.6mm
4. Middle: fiber glass, glass wool, rock wool, mineral wool
5. Thickness: 50mm, 75mm, and 100mm, 200mm, 300mm, etc.
6. Length: according to customer's request
7. Color: white, green, blue, red, etc.
7. Density: 80-120kg/cubic meter
Application of Easy Installation Multi-colored Fiber Glass Wool Insulated Roof Sandwich Panels
Sandwich PU panel is quite suitable to make the roofs and walls of large scale public buildings, office buildings, supermarkets, and industrial factory buildings, etc. It is applicable for textile factories, chemical factories, electronic factories, furniture factories, logistic centers, paper mills, and general prefabricated buildings, etc.
Parameters:
Thickness: | 50mm, 75mm, 100mm, 150mm |
Material of the panels | composed of colorful steel sheets and PU |
Unit Weight of Core Material | 8-20 kg/cbm |
Width of the panels | 500mm or 1000mm |
Panels type | Wall panel and Roof panel |
Surface Texture and Appearance | Small wave, Flat, Embossment, Big rib |
Heat Insulating Material | Polyurethane (pu), glass wool |
Thickness of steel sheet | 0.3-0.7mm |
Color of the coating | White grey, Sea Blue, Red, etc |
Type of sheet Coating | PVDF, HDP, SMP, PE |
Type of Base steel sheet | Hot-dip galvanized, Al-Zn coated |
Features:
1. Heat and sound insulation. Temperature suitable
2. Light weight, water-proof, Good chemical resistance and seismic
resistance, anti-corrosion etc.
3. Energy conservation, environment protection, economical, good
structure, easy to installation.
They are widely used in clean room as non-force bearing wall, roof
and ceiling and as force bearing wall in single-storey
prefabricated buildings. The major application demonstrates in the
clean room system as partitions & ceilings.The fields range
from electronics to semi-conductor, pharmaceutical, bio-tech and
food processing etc.
Installation instruction:
1, First of all, it must carry on the construction preparation
before installation, include personnel, materials, etc. All will be
well prepared.
2, Before the installation of polyurethane wall panel, it should
check whether the verticality and levelness of metope purlin
installation requirements, wall frame column vertical degree meets
the requirement.
3, Before installation polyurethane wall panel, it should first
mounting plate bottom water retaining plate and the bottom of the
window to block water board, water retaining plate and wall frame
beam connection with self tapping screw fixation.
4, Polyurethane wall panel links with ground.
Lateral links: fixed polyurethane sandwich panel with the ground at
the other end of the round hole with steel frame fixed, connection
between the two plate mouth involution, if occurrence crack of the
connectors available heat preservation to fill.
Vertical links: the gap between plates, using the dedicated button
concave groove in the fixed polyurethane wall panel.
Advantages:
1. The Proof of Quality: Now we have customers in different countries and places, such as
Canada, USA, Australia, New Zealand, Singapore, Argentina, Middle-
East, Africa…
2. The Guarantee of Quality: Reasonable design, Professional technicians, Stable production
workers, Full-scale Equipments, Strict QA & QC system…
3. Custom-made Design: We supply our design drawing according to customer practical
situation.
4. Technique Support:
Walk in cold room: we supply our diagrammatic drawing, feel easier
for installation.
Cold storage warehouse: We have nearly 20 professional engineers
who can go aboard to supply technology support and direction, until
turn key for our customers.
5. International Trade Operation: We have concentrated on international trade of cold storage room
line for more than 10 years, accumulated various experience from
different customers of different countries. So we can update our
operation in time according to our customers and new rules. It is
helpful to clear custom and save cost and time for our customers.
Application:
Packing: