A1 A2 A3 Zirconia Coloring Liquid After Shade Liquid Dyeing Fossa And Groove

A1 A2 A3 Zirconia Coloring Liquid After Shade Liquid Dyeing Fossa And Groove

Zirconia Blocks Staining Solution YUCERA Dental Materials And Equipment Manufacturer Zirconia Blocks Coloring

Dyeing Solutions (Coloring Liquid)

1. Simple and fast operate process 1minute dipping

2. Stable color result

3. Using with Yucera zirconia block have perfect effect

4. Penetration can reach 1.5mm color will not be removed even grinding

Note

• Dyeing liquid and crown should keep clean and dry. (Water processing is not suggested. The crown should be dried before dyeing if it' s produced under water processing)
• Dyeing liquid is weakly acidic. Please wear gloves for people with sensitive skin, if it gets in your eyes accidentally, rinse immediately with water and seek medical treatment in time.
• Do not dilute the dyeing solution with water by yourself to avoid affecting the color stability.
• After dyeing, the crown should be dried before sintering. To avoid contamination of the internal components of the sintering furnace and hidden cracks in the crown.
• For dyeing of bridge, it is recommended to use 01 liquid +brushing method to reduce the color difference between the bridge body and crowns.

Note:

Using different brands of sintering furnaces, different sintering temperatures and programs,the color and translucent of crown will be slightly different.Do not use rapid sintering furnace,because the temperature rise too fast, the zirconia can* t be sintered completely which will have large affect to the hardness and translucent of the crown.

High Quality Zirconia Coloring Liquid 26 Colors Dyeing Liquid