Server Immersion Cooling System Dry Cooling Tower
Data center challenges with one immersion cooling solution.
The global datacentre industry is one of the fastest growing
technology driven industries. With emerging digital technologies,
for instance artificial intelligence, data analytics, virtual
reality, IoT and advanced cloud services we could say we are on a
wave of high performance computing.
Obviously datacentres are necessary for digital economies, however
datacentres are dealing with significant challenges, for instance
they are facing boundaries regarding floorspace, access to
(renewable) energy, cooling costs, complexity and cost of build.
The next hardware component generations facilitating the emerging
digital technologies are high powered and require high density
hardware platforms. This results in a situation whereby the
traditional datacentre model does not fit with the technology it
should be facilitating. In addition, datacentres are generating
energy (hot air) which is consistently wasted as it is impossible
to transport to heat users in an efficient and cost friendly way.
Shenglin can offer liquid immersion cooling system. Large-scale
cooling equipment is not required, so the system reduces the total
power consumption for the server system as a whole by about 40%
compared to existing air cooling systems. This dramatic reduction
of power consumption allows customers to approximately double the
server density in the same installation space.
Shenglin dry cooler is the most cost-effective way to remove heat and a necessary
component of the immersion cooling system, We designed a full range
of immersion optimized dry coolers. From 5kW single fan unit to the
V-shaped 48-921kW dry coolers. Made in China, sized to your needs.
|Air discharge direction|
Cooling capacity: from 5 to 649 kw
Air volume: from 2828 to 263503 m3/h
Sound pressure level: from 31 to 69 dB A(10m)
Dry coolers:customized on demand
|High efficiency heat exchanger|
Capacity designs for maximizing the heat transfer relative to the
energy consumption of the fan.
Tube and tube coupling design for low pressure drop in the coil on
the media sides(maximum 100KPa at water designing condition).
Our thermodynamic and aerodynamic designing software is long year
tested and proved in Germany
Only choose low specific energy consumption fans.
Fan nozzle designs for maximum air flow and air throw.
Our fans from the world`s leading manufacturer are practically
proved to be reliable in operation and long lasting.
Motor: protection class IP 54 and insulation class F.
Air separator for each fan.
|Testing||Heat exchangers are supplied clean and tested at a pressure of 30
Coil design refrigerant: water, oil, glycol.
Stainless steel or aluminum casing.
Coated aluminum or copper fins.
Explosion ploof motor.
Customized fin spacing.
Dry cooler D4 series parameter(fin space 2.1mm)
|Capacity||Water||35℃ outdoor temp.||Inlet||45℃,||KW||427.6||488.1||509.9||519.9||590.7||616.7||723.6||791.6|
|Fan||No X φ||2X5X800||2X5X800||2X5X800||2X6X800||2X6X800||2X6X800||2X7X800||2X8X800|
|Sound pressure level||dB(A)||60||60||60||62||62||62||64||66|
Why choose us:
1) We can help buyers design specific products or produce products
according to buyers' design
2) We can print logo according to buyers' requirement
3) We has exported to many countries,such as Singapore,
Philippines, Vietnam, Argentina, Peru, Mongolia, Hong Kong,
UAE,Russia, Poland etc.
4) Design term:We have professional design team.
5) Professional factory: We are manufacturer, specializing in
manufacturing heat exchangers for over 16years, competitive price
with good quality.
6) Rapid response to your needs: We will reply within 24 hours
after receiving you letter. If you have urgent thing, welcome to
7) The Most Efficient Service, Best Quality and Excellent