200V - 240V 0.4KW Servo Drive PLC All In One 32mt PLC Controller For Servo Motor
Brand Name:Coolmay
Model Number:MX3G-C40-32MT
Minimum Order Quantity:1 peice
Delivery Time:3-7 working days after payment done
Payment Terms:T/T, Western Union, MoneyGram
Place of Origin:China
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen China
Address:
#526, Block E, Building 5, Software Industry Base, Nanshan District, Shenzhen , China, 518061
Supplier`s last login times:
within 27 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
200V~240V 0.4KW Servo Motor Drive PLC all in one 32mt plc controller
Features Introduction:
Coolmay servo PLC integrated machine is a high-performance, high-precision, multi-function servo driver. The servo PLC integrated machine is also called "intelligent servo", "programmable servo driver" and "programmable servo amplifier", which integrates servo drive technology, PLC and motion control technology.
Ladder diagram programming can be carried out internally to complete the logic and data operation of plc, and the synchronous control function of multi axis motor can be realized through the 8-axis high-speed pulse motion control of PLC. Intelligent servo is a part of servo system, which is mainly used as the core control component of high-end equipment and intelligent machines. Intelligent servo can be widely used in textile machinery, woodworking machinery and other fields.
Technical parameter:
| Servo drive series | Mx3g-c40 series servo PLC all-in-one |
| size | 160 * 135 * 42 |
| input power | Main circuit power supply: single-phase AC220V, voltage range 200V~240V, 50/60Hz Control loop power supply: internal conversion, no external power supply |
| PLC logic power supply voltage | DC24V |
| Drive motor | Linear (DDL), torque (DDR), voice coil, brushless, brushless servo motor |
| Control mode | Motion sequence, point to point, electronic gear, position, speed, torque control mode |
| Encoder feedback | 17 bit single loop absolute value encoder |
| operation mode | Independent programmable control (PLC), external control (step pulse, PWM, encoder A/B), or distributed network control (Modbus/RS communication) |
| Communication type | RS485 (supports ModBUS and RS protocols) |
| Input,output signal | 16 photoelectric isolated inputs 16 photoelectric isolated outputs, of which three high-speed pulses are programmable and general-purpose |
| Rated power (KW) | 0.4KW |
| Rated current (A) | 2.5A |
| Rated current range of adaptive motor (A) | 2.0~3.0A |
| Program capacity | 16K/step |
| High speed processing | I/O refresh command, input interrupt 6 points, timer interrupt 3 points |
| Data register | D0~D3999, 4000 points in total |
Operating ambient temperature | -10~55 ℃ non freezing |
| Operating ambient humidity | 10 ~99[RH%] non condensing |
| Storage temperature | -20℃~60℃(Maximum temperature guarantee: 80 ℃ for 72 hours) |
| Storage humidity | 10 ~99[RH%] non condensing |
| Height | Normal use below 1000m altitude, derated use above 1000m altitude |
| Vibration / shock | 4.9 (m/s2) /19.6 (m/s2 ) |
| Occasion | Indoor, no dust, no corrosive gas, no direct sunlight |
Comprehensive protection design | Overcurrent, short circuit, grounding, overvoltage, undervoltage, I2t, control error |
Wiring instructions of braking resistor:
If the internal braking resistor is used, the driver should short circuit P and D, that is, it can be used normally according to the factory state, as shown in Figure A. If the external braking resistor is used, the short circuit between P and D must be removed first, and then the external braking resistor must be bridged on P and C, as shown in Figure B:
200V - 240V 0.4KW Servo Drive PLC All In One 32mt PLC Controller For Servo Motor
Inquiry Cart
0