FR500F Series Textile Machine Inverter
|Power input||Rated input voltage (V)||1-Phase 220V (-15%~+20%)|
|3-phase 380 V (-15%~+30%)|
|Rated input current (A)||See table 2-1|
|Rated input frequency (Hz)||50Hz/60Hz,tolerance±5%|
|Power output||Applicable motor (kW)||See table 2-1|
|Rated output current (A)||See table 2-1|
|The maximum output voltage (V)||0~rated input voltage, error<±3%|
|The maximum output frequency (Hz)||0.00~600.00 Hz,unit0.01Hz|
|Control||V/f patterns||V/f control|
|characteristics||Sensor-less vector control 1|
|Sensor-less vector control 2|
|Speed range||1:50 (V/f control)|
|1:100 (sensor-less vector control 1)|
|1:200 (sensor-less vector control 2)|
|Speed accuracy||±0.5% (V/f control)|
|±0.2% (sensor-less vector control 1,2 )|
|Speed fluctuation||±0.3% (sensor-less vector control 1,2 )|
|Torque response||< 10ms (sensor-less vector control 1,2 )|
|Starting torque||0.5Hz: 180% (V/f control, sensor-less vector control 1)|
|0.25Hz:180%(sensor-less vector control 2)|
|Basic functions||Carrier frequency||0.7kHz~16kHz|
|Overload capability||G Model:150% Rated Current 60s,180% Rated Current 10s,200% Rated
|Torque boost||Automatic torque boost;Manual torque boost 0.1%~30.0%|
|V/F Curve||Three ways: Three ways: straight; multi-point type; N Th-type V / F
curve(1.2 Th -type,1.4 Th -type,1.6 Th -type,1.8Th -type,2Th|
|Acceleration and deceleration Curve||Line or curve acceleration and deceleration mode.|
|Four kinds of acceleration and deceleration time,Ramp Time Range
|DC brake||DC brake start frequency: 0.00~600.00Hz|
|DC brake time:0.0s~10.0s|
|DC brake current:0.0%~150.0%|
|Basic functions||Jog brake||Jog frequency range:0.00Hz~50.00Hz.|
|Jog deceleration time: 0.0s~6000.0s.|
|Simple PLC,Multi-speed||Through the built-in PLC or control terminal to achieve up to 16
|Built-in PID||Facilitate the realization of process control loop control system|
|Automatic voltage adjustment(AVR)||When the grid voltage changes, can automatically maintain a
constant output voltage|
|Fast current limit function||Minimize over current fault protection inverter running|
|Over voltage Over current||System automatically limits of current and voltage during operation
to prevent frequent|
|Run||Command source||Given the control panel, control terminal, serial communication
|Frequency given||9 kinds of frequency sources: digital setting, keyboard
potentiometer setting, analog|
|Voltage, given analog current reference pulse is given, the serial
port is given, multi-speed given, PLC is given, the process PI|
|D reference. There are several ways to switch|
|Protection||Provide fault protection dozen:
|Display and keyboard||LED Display||Display Parameters|
|Key lock and function selection||Realize some or all of the keys locked, scope definition section
keys to prevent misuse|
|Run and stop monitoring information||In the run or stop can be set to monitor U00 group four objects
|Environment||Place of||Indoors, no direct sunlight, free from dust, corrosive gases,|
|operation||flammable gases, oil mist, water vapor, water drop and salt, etc.|
|De-rate 1% for every 100m when the altitude is above 1000 meters|
|Relative||5~95%, no condensation|
|Vibration||Less than 5.9m/s2 (0.6g)|
|Installation||Wall-mounted or DIN-rail mounting|
|Inverter model||Battery capacity||Battery capacity||Output current||Adapted motor|
|3 phase power:380V,50/60Hz Range:-15%～+30%|
FRECON's FR500 inverter is an excellent product designed for the
field of machinery and equipment manufacturing. It provides users
with powerful functions in a compact size. It supports V/F and
vector control functions. At the same time, its standard coating
board and independent The air duct design, as well as the overload
capacity up to 150% and the low-frequency torque up to 200%,
provide the inverter with strong environmental adaptability; and in
Significantly simplifies the user's operation and is your efficient
tool in the field of mechanical equipment manufacturing.
FRECON is an enterprise accredited by the double soft in Shenzhen
The National High-tech Enterprise
37 software copyrights and utility patents
12 years experience on frequency inverter and solar pumping
5 Service centers and 12 branches in China
Distribution network and service center cover 40 countries over the
Products' power range covers 0.2KW~1MW
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample to test with reasonable
charges.We can send the sample to you by express like DHL or UPS,
normally you can receive the sample in
Q: What is your terms of payment ?
A:100% in advance . Welcome pay by Trade Assurance through Alibaba
so your payment can get guarantee from ALibaba company. L/C and O/A
would be possible for regular customers.
Q: What is your terms of packing?
A:Generally, We use carton box pack low rated power VFD, VFDs that
are 55KW and above are packed by wooden box. reasonable special
packing requirements from customers are acceptable for us.
Q. Do you test all your goods before delivery?
A: Yes, 100% test before delivery
Q: How long is your delivery time?
A: Generally it would be 5-10 days if the goods are in stock. or
15-20 days if the goods are not in stock, it is according to
quantity. we have much experiency supply goods to big customer,so
don't worry about the delivery time.
With years of export experience along with excellent quality,
advanced services and competitive prices, Frecon Electric has won
numerous customers' trust and support.