Add to Cart
220V Single Phase 0.75KW 1HP AC Drive/Vfd/Frequency Inverter
Project | Specifications | ||
Power input | Rated input voltage (V) | 1-Phase 220V (-15%~+20%) | |
3-phase 380 V (-15%~+30%) | |||
Rated input current (A) | See table 2-1 | ||
Rated input frequency (Hz) | 50Hz/60Hz,tolerance±5% | ||
Power output | Applicable motor (kW) | See table 2-1 | |
Rated output current (A) | See table 2-1 | ||
The maximum output voltage (V) | 0~rated input voltage, error<±3% | ||
The maximum output frequency (Hz) | 0.00~600.00 Hz,unit0.01Hz | ||
Control | V/f patterns | V/f control | |
characteristics | Sensor-less vector control 1 | ||
Sensor-less vector control 2 | |||
Speed range | 1:50 (V/f control) | ||
1:100 (sensor-less vector control 1) | |||
1:200 (sensor-less vector control 2) | |||
Speed accuracy | ±0.5% (V/f control) | ||
±0.2% (sensor-less vector control 1,2 ) | |||
Speed fluctuation | ±0.3% (sensor-less vector control 1,2 ) | ||
Torque response | < 10ms (sensor-less vector control 1,2 ) | ||
Starting torque | 0.5Hz: 180% (V/f control, sensor-less vector control 1) | ||
0.25Hz:180%(sensor-less vector control 2) | |||
Basic functions | Carrier frequency | 0.7kHz~16kHz | |
Overload capability | G Model:150% Rated Current 60s,180% Rated Current 10s,200% Rated Current 1s. | ||
Torque boost | Automatic torque boost;Manual torque boost 0.1%~30.0% | ||
V/F Curve | Three ways: Three ways: straight; multi-point type; N Th-type V / F curve(1.2 Th -type,1.4 Th -type,1.6 Th -type,1.8Th -type,2Th | ||
-type) | |||
Acceleration and deceleration Curve | Line or curve acceleration and deceleration mode. | ||
Four kinds of acceleration and deceleration time,Ramp Time Range :0.0~6000.0s | |||
DC brake | DC brake start frequency: 0.00~600.00Hz | ||
DC brake time:0.0s~10.0s | |||
DC brake current:0.0%~150.0% | |||
Basic functions | Jog brake | Jog frequency range:0.00Hz~50.00Hz. | |
Jog deceleration time: 0.0s~6000.0s. | |||
Simple PLC,Multi-speed | Through the built-in PLC or control terminal to achieve up to 16 speed running | ||
Built-in PID | Facilitate the realization of process control loop control system | ||
Automatic voltage adjustment(AVR) | When the grid voltage changes, can automatically maintain a constant output voltage | ||
Fast current limit function | Minimize over current fault protection inverter running | ||
Over voltage Over current | System automatically limits of current and voltage during operation to prevent frequent | ||
Run | Command source | Given the control panel, control terminal, serial communication port given. | |
Frequency given | 9 kinds of frequency sources: digital setting, keyboard potentiometer setting, analog | ||
Voltage, given analog current reference pulse is given, the serial port is given, multi-speed given, PLC is given, the process PI | |||
D reference. There are several ways to switch | |||
Protection | Provide fault protection dozen: Overcurrent,Overvoltage,Undervoltage,Overtemperature,Overload Etc Protection. | ||
function | |||
Display and keyboard | LED Display | Display Parameters | |
Key lock and function selection | Realize some or all of the keys locked, scope definition section keys to prevent misuse | ||
Run and stop monitoring information | In the run or stop can be set to monitor U00 group four objects were. | ||
Environment | Place of | Indoors, no direct sunlight, free from dust, corrosive gases, | |
operation | flammable gases, oil mist, water vapor, water drop and salt, etc. | ||
Altitude | 0~2000m | ||
De-rate 1% for every 100m when the altitude is above 1000 meters | |||
Ambient | -10℃~40℃ | ||
temperature | |||
Relative | 5~95%, no condensation | ||
humidity | |||
Vibration | Less than 5.9m/s2 (0.6g) | ||
Storage | -20℃~+70℃ | ||
temperature | |||
Others | Efficiency | Rated power≥93% | |
Installation | Wall-mounted or DIN-rail mounting | ||
IP grade | IP20 | ||
Cooling | Fan cooled | ||
method |
FRECON's new generation of compact and simple vector control
frequency conversion FR150A series, under the condition of 60%
reduction in volume, but still continues the good performance of
FRECON frequency converter. Built-in a variety of key functions,
including: up to 200% overload capacity, built-in IPM, SPM two
permanent magnet motor control modes, is a great tool for
energy-saving trends, STO safe torque off function can improve the
overall safety of the equipment, support pulse input As speed
command, parallel control of multiple pumps, EMC filter model (C2
level), low leakage current design, can meet various applications.
In addition, user-defined parameter groups and screw-free wiring
control terminals allow FR150A to have both high performance and
friendly operation.
Efficient power, friendly operation, exquisite size, and sturdy
design are just the portrayal of the FR150A series. Through FR150A,
FRECON Industrial Automation will continue to "create a new future"
with customers with innovative technology, uncompromising quality
requirements and global quality assurance services.
Company profile
FRECON is Shenzhen double-soft enterprises, the central focus on supporting high-tech enterprises, industrial automation, energy efficient, green new energy field of the professional company. FRECON has 10 years of experience in the development and application inverters, servo drive, energy-saving control cabinet, industrial robots, solar inverter systems, electric vehicles and control systems. Products covering power 0.2 KW ~ 1 MW. In EMC and safety, FRECON product complies with European Union CE directives.
FRECON 40 has a number of patents and copyrights invention, utility models and software copyrights.
FRECON strict implementation of the ISO9001: 2008 quality system standards. FRECON products are widely used in equipment manufacturing and energy-saving projects, mainly related to the elevator, petroleum, chemicals, iron and steel, ceramics, textiles, wire drawing machines, air compressors, machine tools, solar energy and other areas.
FRECON owns in East China (Wuxi), South China (Shenzhen), North China (Beijing), Southwest (Chongqing), the Northeast (Shenyang) five regional logistics center, has 21 offices in China, logistics service network covering the whole country. FRECON has coinsurance centers and distribution network in over 40 countries such as Australia, Poland, Spain, South Africa, Russia, India, Bangladesh, Vietnam and so on.
Exhibition promotion
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: Do you provide samples is it free or extra??
A:. Yes, we could offer the sample to test with reasonable charges
We can send the sample to you by express like DHL or UPS, normally
you can receive the sample in one week.
Q: What is your terms of payment?
A:. 100% in advance Welcome pay by Trade Assurance through Alibaba
so your payment can get guarantee from Alibaba company L / C and O
/ A would be possible for regular customers..
Q: What is your terms of packing?
A:. Generally, we use carton box pack reasonable special packing
requirements from customers are acceptable for us.
Q. Do you test all your goods before delivery?
A: Yes, 100% test before delivery
Q: How long is your delivery time?
A:If you have the goods, usually it takes 5-10 days. Not available,
or 15-20 days, according to the number of pieces. We have rich
experience in supply large customers, so do not worry about the
delivery time.
With years of export experience, excellent quality, advanced
services and competitive prices, Frecon Electric has won numerous
customer trust and support.