Galvanized Steel Compensator Dn350 JIS Standard Single Sphere Rubber Expansion Joint Bellows

Galvanized Steel Compensator DN350 JIS Standard Flange Flexible Rubber Bellows Expansion Joint

Product composition

The rubber joint is composed of the inner and outer rubber layer, nylon cord fabric, steel ring, etc. after vulcanization, and then combined with the metal flange or parallel joint loose sleeve. The product reduces vibration and noise, and compensates for thermal expansion and contraction caused by temperature changes. It is widely used in various piping systems.

Product installation precautions
1.Fixed support: If the product is designed to be installed at the near end of the outlet of the pump or the corner of the pipeline, as well as when the product is used in high pressure and high-rise buildings, the pipeline must have a fixed support or fixed bracket, and the force of the fixed support and fixed bracket must be greater than the axial force, otherwise the product should be installed with an anti-pull-off limiting device.
2.Keep away from heat source: The installation site of the rubber joint should be far away from the heat source, and it is strictly forbidden to expose it to strong radiation rays, and use media that does not meet the requirements of this product.
3.Avoid exceeding the displacement limit: It is strictly forbidden to exceed the displacement limit during installation, and the installation bolts should be symmetrical, and gradually pressurized and tightened to prevent local leakage. For the working pressure of more than 1.6MPa, the installation bolt should have an elastic pressure pad to prevent the bolt from loosening during work.
4.Protective rubber joints: It is strictly forbidden to cut the surface and sealing surface of sharp appliances during transportation, loading and unloading.

Parameter table

Main connection size

Product composition

FAQ:

Q: What are your payment terms?

A: T/T (30% as deposit, remaining 70% to be paid before delivery), L/C at sight.

Q: Can I visit your factory before ordering?

A: Yes, welcome to our factory to check the quality.

Q: What is the minimum order quantity for this product?

A: Our MOQ is one piece, it depends on the product type and customer demand.

Q: Where is your loading port?

A: Shanghai, Qingdao or Tianjin in China.

The company adheres to the business philosophy of "customer satisfaction is our first duty, all employees are responsible for creating quality, continuous improvement sets new heights, honest service builds reputation", and wholeheartedly provides high-quality products and professional services to new and old customers.

The factory mainly produces rubber expansion joints, duckbill check valves, dismantling joint, bellow expansion joints, compensators, repair clamp, 02S404 national standard waterproof casings, gate valves ,butterfly valves etc; and all products have passed ISO 9001:2015 quality management system certification; adopting national and industry standards, advanced manufacturing technology, strong R&D and manufacturing capabilities, they are widely used in water supply, drainage, electricity, chemical industry, gas, metallurgy, urban construction and environmental protection and other pipeline industries.