Add to Cart
Application:
Series BOD-T engine oil regeneration system is mainly for regenerating the waste engine oil, this equipment can effective separate water, gas, particles, deeply oxides, free carbon, colloid, asphalt and wax from oil, making black engine oil become transparent golden color. This equipment has the functions of dewatering, degassing, decolor. Improving the engine oil’s properties, restoring the oil’s performance and lowering wear to ensure the engine can work normally and safely, prolonging the engine and engine oil lifetime.
Features:
1.Use of special chemicals to eliminate oil-ion’s charge polarity, collecting oil-ions and separating out them, removing colloid, asphalt and other chemical compounds.
2.Gas treatment device combined with air filter and vacuum degassing, dewatering to remove the odor and water.
3.Closed type filtering system use stainless steel mesh, reliable, no pollution. Two filtering units can realize continuous production.
4.Vacuum degassing, dewatering, removing particles make sure effectively improve oil properties, restoring oil performance.
5.Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable.
6.Compact structure, reasonable layout, small space applied, large output.
7.Imported Germany electric parts (such as SIEMENS, SCHNEIDER), good performance, safe and reliable.
Technical parameters:
Index name | unit | BOD-T-1000 | BOD-T-2000 | BOD-T -5000 | BOD-T-10000 |
Flow rate | L/Day | 1000 | 2000 | 5000 | 10000 |
Ratio of regeneration | % | 75 -95 | |||
Working pressure | MPa | -0.095 ~ 0.4 | |||
Temperature range | C | 80~180 | |||
Working noise | dB(A) | ≤70 | |||
Power supply | 380V 50HZ 3PH(As per user’s option) | ||||
Heating power | kW | 55 | 108 | 145 | 192 |
Total power | kW | 68 | 122 | 162 | 216 |
Inlet(Outlet) | mm | 32 | 32 | 42 | 42 |
Reactor system | mm | 2500x2100x2300 | 3000x2100x2300 | 3300x2100x2300 | 5600x2100x2300 |
Filtration system | mm | 3000x1200x1900 | 3000x1400x1900 | 3500x1600x2100 | 2x3500x1600x2100 |
Gas treatment system | mm | 1360x800x3000 | 1360x800x3000 | 1560x950x3000 | 1560x950x3000 |
Weight | kgs | 3100 | 4200 | 6700 | 8800 |
Systems of equipment
l Pretreatment system: Waste oil will be pumped into the distillation kettle after pretreated.
l Distillation system: through burning coal, gas or fuel oil to make the oil in the kettle up to the working temperature. This system equipped with stirring system and insulation system.
l Cooling system: the gaseous hydrocarbon will be cooled into liquid base oil. Gasoline and diesel.
l Oil storage system: the base oil, gasoline and diesel get from cooling system storage here, and then pump into the storage tank.
l Vacuum system: meet the technology requirement.
l Filtration system: rapidly filter out mechanical impurities in the base oil, gasoline and diesel, get the high quality base oil, gasoline and diesel.
Recovery rate
Base oil: 85%~88 % ( index same as SN150~SN200)
Gasoline: about 3%
Diesel: about 3%-4%
Oil residue: 6%~8%
Index of oil after treatment
No | Item | Unit | Technical data | |
Light base oil | Medium/heavy base oil | |||
1 | Viscosity(40°C) | mm2/s | 16~32 | 28~72 |
2 | Viscosity index | ≥99 | 110 | |
3 | Appearance | Transparency | Transparency | |
4 | Color index | ASTMD1500 | ≤1.2 | ≤1.6 |
5 | Pour point | °C | -15 | -10 |
6 | Water content | %W/W | ≤0.05 | ≤0.05 |
7 | Flash point open | °C | ≥180 | ≥210 |
8 | Ash content | %W/W | 0.005 | 0.005 |
9 | Carbon residue | %W/W | ≤0.13 | ≤0.13 |
10 | Corrosioncopper,100°C3h | Qualified | Qualified | |
11 | Acidity | mgKOH/g | ≤0.05 | ≤0.05 |
Performance characteristics,advantage introduction