48Hz 62Hz Silicone Rubber Material High Voltage Tracking Index Tester
Brand Name:Daxian
Certification:ASTM D2303，IEC60587-2007
Model Number:DX8427
Minimum Order Quantity:One set
Delivery Time:5-8 work days
Payment Terms:L/C, D/A, D/P, T/T, Western Union
Contact Now
Add to Cart
Verified Supplier
Location:
Dongguan Guangdong China
Address:
No.168 Zhen'an West Road Changlian Industry Mansion Xiabian Community Dongguan China
Supplier`s last login times:
within 28 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
IEC60587 6 KV High Voltage Tracking Index Tester ASTM D2303
Scope :
Applicable to electrical and electronic products, household
appliances and their materials for electrical tracking resistance
and corrosion testing, simulating the power frequency (48Hz-62Hz),
using liquid pollutants and inclined surface samples, passing the
electrical tracking resistance The measurement of corrosion and
corrosion assesses the resistance to tracking and corrosion of
electrical insulating materials used under severe environmental
conditions.
Standard:IEC60587-2007, ASTM D2303
Parameters:
Name | High Voltage Tracking Index Tester |
Box | ≥ 0.5 cubic meters |
Drop size | 44 to 50 drops / cm3 |
Power supply | AC 220V, 50Hz |
Electrical load | 100 ~ 6000V adjustable |
Drip height | 30mm ~ 40mm adjustable |
Electrode Pressure | 1.00N±0.05N |
Flow range | 0.00185 to 2 ml / min |
Working speed | 0.1 to 15 rev / min |
Preparation of the sample:
Process the sample into a sheet, preferably 6mm in thickness, 50×120mm in size, drilled with electrode mounting holes, and make a reference mark line at 45mm from the lower edge of the sample, and clean the sample with distilled or deionized water , Make the surface without any dirt, if the sample surface is smooth, it should be slightly polished;
Preparation of filter paper liner:
Use the equipped knife to cut the filter paper into the shape shown in Figure 4, and pad the cut filter paper between the upper electrode and the sample. If you use a thicker filter paper, you usually need to pad 3 to 5 layers.
Typical customers of the company:
Guangdong South China University of Technology;
Guangzhou Tianci Silicone Materials Group Co., Ltd.;
Zhejiang Golden Gate Industry;
Guangzhou Special Pressure Equipment Testing and Research
Institute;
Wenzhou Yikun Electric;
Liming Chemical Research and Design Institute Co., Ltd.;
University of Shanghai for Science and Technology;
Tianjin Huaxinda Investment Co., Ltd.;
Tianjin Hezong Power Equipment Co., Ltd.;
Guangdong Zhujiang Wire and Cable Co., Ltd.;
Fujian Nanping South Line Cable Co., Ltd.;
Shenyang Institute of Technology;
Guangdong Metrology and Testing Technology Service Center;
Shenzhen Silver Star ABB;
Guangdong Jieguo New Material Co., Ltd.;
Dongguan Nanju Polymer Material Co., Ltd.;
Xi'an University of Architecture and Technology;
Shandong Dezhou Baoya New Energy Automobile Co., Ltd.;
China Zhongrui Electric Co., Ltd.;
Alcan (Tianjin) Aluminum Alloy Products Co., Ltd.;
Suzhou Hailong Silicone Rubber Co., Ltd. and many other
institutions of higher learning and national units...
48Hz 62Hz Silicone Rubber Material High Voltage Tracking Index Tester
Inquiry Cart
0