Heavy Oil Fired Skid Mounted Thermal Oil Boiler For Wood Processing Plant

Heavy Oil Fired Skid Mounted Thermal Oil Boiler For Wood Processing Plant​

Thermal oil boiler is a package type forced circulation fuel (gas) fired boiler, the heated area adopts compact structure and it is composed of internal,intermediate and external( or internal and external)disc coil tube, inner tube is the heating surface, while middle surface,outer surface and outer surface of inner tube constitute a convection heating surface. Fuel combusts in the combustion chamber that is composed of inner coil tube,then heat will be released, after absorbing most of the heat through radiation heating surface,high temperature gas enters into the convection heating surface and exchange heat,in the end,low temperature gas will be discharged from gas duct outlet,then it will be eliminated directly the atmosphere from smokestack.

Thermic Fluid Heater, thermal oil boiler

Heat Power:300,000-2,000,000 Kcal/H

Working Pressure :0.8 Mpa

Fuel :light oil,heavy oil,diesel

Application : textile printing and dyeing, plastic and rubber, paper industry, wood industry, building material, food industry

Main features of industrial thermal oil boiler

High Quality

YY(Q)W series thermal fluid boiler heater has skid-mounted design and full automatic control system. The heat carrier is thermal fluid oil, boiler's working pressure ≤1.0MPa, working temperature ≤310℃. Adopting three-pass structure, 3 layer corrugated coil rings.

Free-Installation

The complete boiler system is well skid-mounted on the basement, also we have done the pipe(valves) connection and wire connection. After receiving the boiler, user no need to do installation, just filling the thermal fluid oil, join the fuel and electricity. Entire boiler system is portable.

Excellent Structure

Free-Assembly,Portable System,Three Fire-Passes,New Wet-Back Design,Corrugated Furnace, Fire-tube

Simple Operation

Automatic PLC ON/OFF,Visible Oil Temperature,Visible Working Pressure,Visible Exhaust-gas Temperature,Adjustable Oil Temp. ≤310℃

All thermal oil boilers are assembly structure which is easy for installation by just connecting system device by pipes. Intelligent system control of thermal oil fluid haters makes boiler operation easier and more simple. Controller with imitation screen display has auto igniting, burning, circulation pumps control, alarm, etc. functions.

Technical parameters

The Gas/Oil Fired thermal oil boiler auxiliaries

oil fired thermic fluid heater hot oil boiler

All thermal oil boilers are assembly structure which is easy for installation by just connecting system device by pipes. Intelligent system control of thermal oil fluid haters makes boiler operation easier and more simple. Controller with imitation screen display has auto igniting, burning, circulation pumps control, alarm, etc. functions.

Application of thermal oil system

The series of thermal oil heater is widely used in the following industries:

1. Petrochemical Industries.
2. Oil processing industry.
3. Synthetic fiber industry.
5. Textile printing and dyeing industry.
6. Plastics and rubber industry.
7. Paper processing Industry.
8. Timber industry.
9. Building materials industry.
10. Air-conditioning industry.
11. Detergent Industry: .
12. The automotive industry.
13. Electrical equipment industry.

FAQ of thermal oil boiler

1.What is the highest temperature that thermal oil heater could achieve?

thermal oil heater can reach as high as 330℃, and working under low pressure (<1.0MPa)

2.What are the heat-resistance temperature of grate and furnace?

The heat resistance temperature of grate is related to the grate material, the highest temperature could be as high as 1100℃, and the lower temperature could be 700℃.

The highest heat resistance temperature of furnace could be about 1700℃~1800℃.

3.What is conduction oil/ hot oil / heat transfer fluid?

Conduction oil has a high boiling point, it usually used for the industries that need the temperature of 150~350℃, to instead of steam. The hot oil has the advantages of high transfer efficiency, fast heat transfer, and good thermal stability.

Henan Jinzhen Boiler Co., Ltd is a professional industrial boiler manufacturer that specialized in the environment-friendly steam boiler, hot water boiler, thermal oil boiler and pressure vessels’ design, manufacture, installation, maintenance. Jinzhen Boiler factory is located in beautiful Zhoukou City which nearby Zhengzhou Airport, Shangqiu Railway Station, gets convenient traffic.We have over 6,000sq.m. building area, 105 employees, annual sales amount exceeds 25,000,000USD which includes 25% export amount in worldwide.

Jinzhen boilers include more than 150 kinds. There are:
(1) DZL coal/biomass fired steam boiler(1-20ton/h;)
(2) DZH wood fired steam boiler(0.5-6ton/h;)
(3) SZL biomass/coal fired steam boiler(4-25ton/h;)
(4) WNS series gas/oil fired steam boiler(0.5-20ton/h;)
(5) YLL(W) series coal/biomass fired thermal oil boiler(150,000-16,000,000Kcal)
(6) YY(Q)W gas /oil fired thermic fluid heater(150,000kcal-12,000,000Kcal)

All industrial boilers comply with GB/T quality standards and are greatly appreciated in a variety of markets throughout the world.Well-equipped facilities and excellent quality control throughout all production stages to totally guarantee customers' satisfaction.

As a result of high quality boiler and outstanding customer service, we have gained a global sales network reaching America, Australia, Mexico, Vietnam, Russia, Kazakhstan, South Africa, Syria,South Africa, Ethiopia, etc.