Cool Design Ink Ladies PU Jacket With Grey Melange Detachable Hooded TW77349

Brand Name:OBR

Model Number:30 32 34 36 38 40 42 44

Minimum Order Quantity:1000units

Delivery Time:10-15days after pp approval

Place of Origin:China

Material:PU

Contact Now

Add to Cart

Haining Idol Imp. & Exp. Co., Ltd.

Active Member

Location: Jiaxing Zhejiang China

Address: Room 1402,Ziwei Building,Haizhou Street, Haining City,Jiaxing City,Zhejiang China.

Supplier`s last login times: within 16 hours

View Contact Details

Product Details Company Profile

Product Details

Ladies' zip through grey melange detachable hooded ink pleather biker jacket TW77349

Description

Shell fabric	100%PU/Polyurethane with 100%viscose base, 310-330gsm
Lining	DTM 210T
Hood	Grey melange brushed fleece, 100%polyester
Hood lining	100%polyester single jersey

Trims list

Trim	Position	quantity	Size	Color
Metal zip	CF, side pocket, chest pocket	5	#5	gunmetal
branded Puller	CF, side pocket, chest pocket	5		gunmetal
branded Popper	collar	1	1.5cm	gunmetal
Toggles	hoold	1		grey
Plastic button	inner collar	5	1cm	DTM ink

Styling Details:
Front:

- Styling to 4cm wide mandarin collar with edge stitching and branded popper.

- #5 gunmetal center front zip with multi stitching on the 2.8cm wide either side patch, exposed DTM zip tape with branded puller.

- Shoulder patch to have triple stitching at front and back and have decorative 3mm binding insertion as per image.
- To have 2x cutline on each side of front and triple needle stitching.

- To have non-functional chest #5 gunmetal zip pocket and edge stitching, with exposed DTM zip tape and branded puller.

- To have slanted functional side pockets with #5 zip in gunmetal color with exposed DTM zip tape and branded puller, edge stitched for the pocket.

- Waistband to be 5cm wide twin needle stitching at top and bottom of hem.

- Hood to be 260g brushed fleece in grey melange color and lined with single jersey DTM lining.

- Hood to be normal 3 pieces with footstitching.

- Hood to have DTM drawcord with DTM eyelets and plastic tips

- To be attached on the inside of the collar with DTM navy buttons

Sleeves:

- With vertical cutline at front and bck with triple needle stitching.

- To have cutline without stitching under armhole.
- To have 16cm wide 3mm binding insertion and stitching details as per on the shoulder.

Back:

- To have center back opening seams and stitching.

- To have 2x vertical cutlines and triple stitching seams on the either side as image.

- To have CB inset with horizontal 9x stitch lines detail

Inside:
To be fully lined DTM 210T superfine lining.

Hanger loop with shell fabric.

Branding:

OBR branded trims
All metal hardware to be branded and gunmetal color.

Spec

MEASUREMENTS	Tolerances	26	28	30	32	34	36	38	40	42	44
Collar Depth @ Centreback Neck	0/0	3	3	3	3	3	3	3	3	3	3
Collar Length - Top Edge to tip end	5/5	42.6	42.6	43.4	44.2	45	46.2	47.4	48.6	49.8	51
Across Back Neck (HSP to HSP)	5/5	15.8	15.8	16.2	16.6	17	17.6	18.2	18.8	19.4	20
Across Front Mid-Armhole or Yoke	5/5	30	31	32	33	34	35.2	36.4	37.9	39.4	40.9
Across Back Mid-Armhole or Yoke	5/5	31	32	33	34	35	36.2	37.4	38.9	40.4	41.9
Half Bust at Underarm	5/5	38	40	42	44	46	48.5	51	54	57	60
Half Waist (41cm down)	5/5	31	33	35	37	39	41.5	44	47	50	53
Half Hem Width - Straight Across	5/5	38	40	42	44	46	48.5	51	54	57	60
Shoulder Seam ex Neck Trim	5/5	10.1	10.1	10.4	10.7	11	11.3	11.6	11.9	12.2	12.5
Long Sleeve Length (including Cuff)	5/5	60.8	60.8	61.2	61.6	62	62.4	62.8	63.2	63.6	64
Half Armhole (Diagonal)	5/5	18.6	18.6	19.4	20.2	21	21.8	22.6	23.4	24.2	25
Half Bicep at Underarm Pt	5/5	14.6	14.6	15.4	16.2	17	17.8	18.6	19.4	20.2	21
Half Cuff Width (Long)	0/0	9.5	10	10.5	11	11.5	12	12.5	13	13.5	14
Front Length (from HSP)	10/10	55	55	56	57	58	59	60	61	62	63
C/Back Length from Neck Seam	10/10	53	53	54	55	56	57	58	59	60	61
Chest Pocket Position from NSP	5/5	15.5	15.5	16	16.5	17	17.5	18	18.5	19	19.5
Zip Length	0/0	48	48	49	50	51	52	53	54	55	56