ASME B16.9 ASTM B336 Monel 400 Short Stub End 4″ SCHXS

Brand Name:HT

Certification:ISO TUV BV SGS,etc.

Model Number:ASME B16.9 ASTM B336 Monel 400 Short Stub End 4″ SCHXS

Minimum Order Quantity:1pc

Delivery Time:5~50days

Payment Terms:L/C, D/A, D/P, T/T, Western Union

Contact Now

Add to Cart

Zhengzhou Huitong Pipeline Equipment Co.,Ltd.

Active Member

Location: Zhengzhou Henan China

Address: Room 1703, 17th Floor, Building 5, Jinyin Modern City, Guangdian South Road, Jinshui District, Zhengzhou City, Henan Province, China.

Supplier`s last login times: within 1 hours

View Contact Details

Product Details Company Profile

Product Details

ASME B16.9 ASTM B336 Monel 400 Short Stub End 4″ SCHXS

1. Key Specifications / Features

Type: Monel 400 Stub End
Material: Monel 400 (UNS N04400/Alloy 400)
Size: DN100 (4″)
WT: SCHXS

2. Chemical Composition, % of Monel 400 (UNS N04400/Alloy 400)

C	Mn	S	Si	Ni	Cu	Fe
.30 max	2.00 max	.024 max	.50 max	63.0 min	28.0-34.0	2.50 max

3. PROPERTIES OF MONEL 400 (UNS N04400/ALLOY 400)

The following table describes the properties of Monel 400.

Relative to other similar metals, it unusually is strong and corrosion-resistant.

Property	Value (Metric)	Value (Imperial)
Density	8.80*103 kg/m3	549 lb/ft3
Modulus of Elasticity	179 GPa	26,000 ksi
Thermal Expansion (20ºC)	13.9*10-6º C-1	7.710-6 in/(inºF)
Specific Heat Capacity	427 J/(kg*K)	0.102 BTU/(lb*ºF)
Thermal Conductivity	21.8 W/(m*K)	151 BTUin/(hrft2*ºF)
Electric Resistivity	54.710-8 Ohmm	54.710-6 Ohmcm
Tensile Strength (Annealed)	550 MPa	79,800 psi
Yield Strength (Annealed)	240 MPa	34,800 psi
Elongation	48%	48%
Liquidus Temperature	1,350º C	2,460º F
Solidus Temperature	1,300º C	2,370º F

4. Mechanical Properties

Typical room temperature Tensile Properties of Annealed Material

Product Form	Condition	Tensile (ksi)	.2% Yield (ksi)	Elongation (%)	Hardness (HRB)
Rod & Bar	Annealed	75-90	25-50	60-35	60-80
Rod & Bar	Cold-Drawn Stress Relieved	84-120	55-100	40-22	85-20 HRC
Plate	Annealed	70-85	28-50	50-35	60-76
Sheet	Annealed	70-85	30-45	45-35	65-80
Tube & Pipe Seamless	Annealed	70-85	25-45	50-35	75 max *

5. Dimensions of ASME B16.9 Lap Joint Stub End

Schedule XS

NPS	OD	T	G	F	R	kg
1/2	21.3	3.73	34.9	76.2	3.18	0.2
3/4	26.7	3.91	42.9	76.2	3.18	0.3
1	33.4	4.55	50.8	101.6	3.18	0.4
1.1/4	42.2	4.85	63.5	101.6	4.76	0.6
1.1/2	48.3	5.08	73	101.6	6.35	0.7
2	60.3	5.54	92.1	152.4	7.94	1.4
2.1/2	73	7.01	104.8	152.4	7.94	2
3	88.9	7.62	127	152.4	9.53	2.9
3.1/2	101.6	8.08	139.7	152.4	9.53	3.4

NPS	OD	T	G	F	R	kg
4	114.3	8.56	157.2	152.4	11.11	4.1
5	141.3	9.53	185.7	203.2	11.11	7.5
6	168.3	10.97	215.9	203.2	12.70	10
8	219.1	12.70	269.9	203.2	12.70	16
10	273.1	12.70	323.9	254	12.70	24
12	323.9	12.70	381	254	12.70	29
14	355.6	12.70	412.8	304.8	12.70	38
16	406.4	12.70	469.9	304.8	12.70	43
18	457.2	12.70	533.4	304.8	12.70	49
20	508	12.70	584.2	304.8	12.70	63
24	609.6	12.70	692.2	304.8	12.70	76

Dimensions are in millimeters unless otherwise indicated. Weights are in kilograms and approximately given.

6. Dimensional Tolerances of Stub Ends ASME B16.9

Nominal Pipe Size	1/2 up to 2.1/2	3 to 3.1/2	4	5 to 8	10 to 18	20 to 24
Outside Diameter at Welding End (OD)	+ 1.6 – 0.8	1.6	1.6	+ 2.29 – 1.6	+ 4.06 – 3.05	+ 6.35 – 4.83
Overall Length (F)	1.6	1.6	1.6	1.6	2	2
Outside Diameter of Lap (G)	+ 0 – 0.76	+ 0 – 0.76	+ 0 – 0.76	+ 0 – 0.76	+ 0 – 1.6	+ 0 – 1.6
Thickness of Lap (T)	+ 1.52 – 0	+ 1.52 – 0	+ 1.52 – 0	+ 1.52 – 0	+ 1.52 – 0	+ 1.52 – 0
Fillet Radius of Lap (R)	+ 0 – 0.76	+ 0 – 0.76	+ 0 – 1.6	+ 0 – 1.6	+ 0 – 1.6	+ 0 – 1.6
Wall Thickness (t)	Not less than 87.5% of Nominal Wall Thickness

Company Profile

Huitong Group was established in 1978. After 38 years'development and innovation,by now,Huitong Group has set up multiple subsidiary companies.Among them,Zhengzhou Huitong Pipe Fitting Co.,Ltd.,with the indepent right of import and export, is mainly engaged in exporting steel pipe and pipe fittings for Huitong Group and assisting another subsidiary company of Huitong Group:Zhengzhou Huitong Machanical Equipment Co.,Ltd., in exporting machanical equipment.

Zhengzhou Huitong Pipeline Equipment Co.,Ltd.,with the strong support of Huitong Group,and years'development and innovation, are more and more professional in technical service and can manufacure products with all kinds of material,shape and size. Especially in elbows, tee, reducer, flange and pipe cap etc., we have gained more than 20 product patent, and hundreds of technology patent. Also,we have gradually taken an ireplacable role in High-pressure,high-temperature and anti-corrosion area. With the continuous construction of engery in China,such as petrol gas,electric power,etc.,our company has become the purchasing center of whole set fittings for such projects.In 2009,a foreign trade team established,is manily engaged in oil gas and electric power projects abroad.By now, our products have been exported to

Canada,Malaysia,Parkistan,UAE, Eygpt,the Middle East countries, etc.. We have passed the qualification of ISO9001:2000 and API quality certification system. High-quality products and high-class service are well received by abroad customers in this industry. The unique diversified production line can offer you one-package serive, you can pruchase all complex products from us at one time. What's more, our sufficient material stock and conventional product stock can ensure you receive satisfied product in the shortest time.

With powerful financial strength,advanced managerial concept, excellent marketing service,strict quality control system and integrated marketing team,we would like to develop together with you hand in hand. Adhering to the operation principle of "faith first and clients foremost", we always supply high quality products, complete after-sales service and favorable prices. We sincerely hope to establish long-term cooperation with you on the basis of mutual benefits, reciprocity and common development.