304 Structural Stainless Steel Sheet , Mirror Finish Stainless Steel Sheet 4x8 Decorative
Brand Name:Tisco BAOSTEEL ZPSS JISCO SINOY
Certification:SGS, TUV, ISO
Model Number:201 304 430 410
Minimum Order Quantity:1 Tons
Delivery Time:3-5 working days for regular size,
Payment Terms:T/T, L/C
Contact Now
Add to Cart
Active Member
Location:
Wuxi Jiangsu China
Address:
Nongshi Road,#07,Dongbei Tang District,Xi Shan,Wuxi,Jiangsu,CN,Zip:214000
Supplier`s last login times:
within 2 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
201 304 430 410 Stainless Steel Plate / Coil , Hot Rolled Steel Sheet
Sino Yuan is one of most prominent Stainless Steel Stockholder and Service Center providing Stainless Steel to various industries in the region. Sino Yuan's stock holds the entire range of stainless steel like sheets, coils, pipes for decoration and industry,round bars in different grades(201 SS304 304L 316 316L 321 310S 309S 430 410 2205 904L)and sizes specially stocked to meet the local industrial demands as well as the International Mraket.
Hot-Rolled Stainless Steel Plate:
Continuous casting slab or slab slab is used as raw material,
heated by step heating furnace, dewatered by high pressure water
and then into rough rolling mill.
The rough rolling material passes through the cutting head and tail
and then enters the finishing mill to carry out computer controlled
rolling. After the final
rolling, it is subjected to laminar cooling (computer controlled
cooling rate) and coiler winding, which becomes a straight hair
roll. The head and tail of the straight hair roll are often in the
shape of a tongue and a fishtail. The thickness and width are
poorly accurate, and the side has frequent defects such as a wave
shape, a folded edge, and a tower shape. The weight of the coil is
heavier and the inner diameter of the coil is 760 mm.
| Hot rolled plate | |||||||
|---|---|---|---|---|---|---|---|
| Specification (Thick) | Big Deviation | Normal Deviation | Small Deviation | No Deviation | |||
| 3.0mm | 2.6mm-2.75mm | 2.75mm-2.85mm | 2.86mm-2.9mm | no less than 2.9mm | |||
| 4.0mm | 3.5mm-3.6mm | 3.6mm-3.75mm | 3.76mm-3.95mm | no less than 3.95mm | |||
| 5.0mm | 4.5mm-4.6mm | 4.6mm-4.75mm | 4.75mm-4.95mm | no less than 4.95mm | |||
| 6.0mm | 5.4mm-5.6mm | 5.6mm-5.75mm | 5.75mm-5.85mm | no less than 5.85mm | |||
| 8.0mm | 7.3mm-7.5mm | 7.5mm-7.65mm | 7.65mm-7.85mm | no less than 7.85mm | |||
| 10.0mm | 9.2mm-9.3mm | 9.3mm-9.6mm | 9.6mm-9.85mm | no less than 9.85mm | |||
| 12.0mm | 11.1mm-11.2mm | 11.2mm-11.6mm | 11.6mm-11.85mm | no less than 11.85mm | |||
| 14.0mm | 13.1mm-13.2mm | 13.2mm-13.6mm | 13.6mm-13.85mm | no less than 13.85mm | |||
Hot-rolled sheet has relatively low strength, poor surface quality (low
oxidation/smoothness), but good plasticity, generally medium and
heavy plate, cold-rolled sheet: high strength, high hardness, high
surface finish, generally thin sheet, can be used as stamping With
the board.
Hot-rolled steel sheet, mechanical properties are far less than cold processing, second only to forging, but with good toughness and ductility
Hot-rolled steel sheet, mechanical properties are far less than cold processing, second only to forging, but with good toughness and ductility
CHEMICAL COMPOSITION
| 201 | C | Si | Mn | P | S | Ni | Cr |
| ≤0.15 | ≤1.00 | 5.5~7.50 | ≤0.050 | ≤0.03 | ≤1 | 16.00~18.00 |
Data of Other Grades Chemical Composition :
| Typical chemical composition | ||||
| % | 304 | 304L | 310S | 316L |
| C | 0-0.07 | 0-0.03 | 0.25 | 0.03 |
| Mn | 0-2.0 | 0-2.0 | 2.00 | 2 |
| Si | 0-1 | 0-1 | 1.50 | 0.75 |
| P | 0-0.05 | 0-0.05 | 0.045 | 0.045 |
| S | 0-0.02 | 0-0.02 | 0.03 | 0.03 |
| Cr | 17.5-19.5 | 17.5-19.5 | 24.0-26.0 | 16.0-18.0 |
| Ni | 8-10.5 | 8-10.5 | 19.2-22.0 | 10.0-14.0 |
| Mo | 0.75 | 2.00-3.00 | ||
| N | 0.1 | |||
| Cu | 0.50 | |||
| Fe | Balance | Balance | Balance | |
Welding
Excellent weldability by all standard fusion and resistance
methods, both with and without filler metals. Heavy welded sections
in Grade 201 require post-weld annealing for maximum corrosion
resistance.
Machining
Stainless steel tends to work harden if machined too quickly. For
this reason low speeds and constant feed rates are recommended.
Factory and Machinery Equipment :
We had our own factory to do slitting re-rolling and finish treatment machine,PVC and interleaving paper we will using with our machine for you,could protect stainless steel surface from damage or any scratches,
1. CNC Flame Cutting Machine
2. CNC Plasma Cutting Machine
3. CNC Laser Cutting Machine
4. Bending Machine
5. Shearing Machine
6. Punch Machine
7. Driving Machine
Packing
waterproof paper and steel strip reinforcement,one package about 2 tons,Load in 20GP / 40GP
WHY US?
Q1. How do you control quality ?
A1: Mill Test Certification is supplied with shipment, Third Party
Inspection is available.
Q2. What are the advantages of your company ?
A2: We have many professionals, technical personnel, more
competitive prices and best after-dales service than other
stainless steel companies.
Q3. How many coutries you already exported ?
A3: Exported to more than 50 countries mainly from America , Russia
, UK , Kuwait, Egypt ,Brazil , UAE , Germany , Dubai , Saudi Arabia
, Iran , Turkey , Jordan , Malaysia , Singapore , etc.
Q4. Can you provide sample ?
A4: Small samples in store and can provide the samples for free.
Customized samples will take about 5-7days
304 Structural Stainless Steel Sheet , Mirror Finish Stainless Steel Sheet 4x8 Decorative
Inquiry Cart
0