Add to Cart
In order to really improve the efficiency of stamping production,
continuous molds must be used, and all continuous molds must be
equipped with an automatic feeder to complete the punching of each
step in order to ensure efficient use, which is called step, and
the step is fed by Machine to complete.
In actual production, the feeder may sometimes fail to feed the
mold correctly and accurately. Because the relationship between the
feeder, the mold, and the punch is continuous in a cycle.
When the feeder does not have a step, the press may have received a signal from
the feeder, and the punch starts to punch under the action of the
feeder signal.
At this point, the mold is mounted on the punching surface, the
punch will start working due to the wrong signal, but the strip of
the feeder has not yet reached the specified position, so the punch
will break the mold.
The punching machine will stamp the strip and the mold after
receiving the control signal of the detecting controller and the
feeding signal of the feeder. The structure is simple and compact,
and the mold can be effectively protected, avoiding loss in the
stamping production process, improving production efficiency and
reducing Production costs are safe and reliable.
After the detecting block is in contact with the detecting
controller, the detecting controller sends a control signal to the
punching machine. After receiving the two signals of the detecting
controller and the feeding machine, the punching machine drives the
upper template to drive the cutting punch to move downward, and the
cutting punch will be cut. The strip is cut to obtain waste.
The strips on the punching table are stamped with the mold after
the action of the pressing plate, and the required processing
requirements have been completed, thus achieving precise control of
the feeding.
Specification:
Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
Power(V) | 3 Phase 220V/380V/50HZ | |||||
Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 |
Straigtening performance:
tock Thicknees (mm) | Stock Width (mm) | |||
0.3 | 400 | 500 | 600 | 800 |
0.4 | ||||
0.6 | ||||
0.8 | ||||
1.0 | ||||
1.2 | ||||
1.4 | ||||
1.6 | 470 | 470 | ||
1.8 | 400 | 400 | ||
2.0 | 360 | 360 | ||
2.3 | 300 | 300 | 300 | 300 |
2.5 | 230 | 230 | 230 | 230 |
2.8 | 150 | 150 | 150 | 150 |
3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is
provi