Walk through Metal Detector MCD-200
1. Function introduction:
(1) to detect the region without blind spots;
(2) precise positioning: average distribution of six independent
detection region, to detect the target,
the sound and light simultaneously Alarm, LED alarm light on both
sides of the main body alarm zones,
accurately positioning, visual display of digital objects
(3) modular design: the use of modular design, installation
convenience, easy to rule out failure.
(4) self-diagnosis functions: built-in self-diagnostic procedures,
power-on self test.
(5) microprocessor technology: the control more flexible, through
the control panel can be programmed to all default parameters, To
meet the needs of users use requirements
(6) complex circuit design, infrared devices, computer automatic
identification, can effectively reduce false positives and
omissions, and since Dynamic statistical report to the police
frequency, through the number.
(7) has the DSP digital signal processing filter systems, have
excellent anti electromagnetic interference capability and strong
resistance touch And collision capacity, many people crowded in the
case of normal operation.
(8) Adjustable sensitivity: Each detecting area has 100 sensitivity
level may require adjustment in accordance with the appropriate
(9) specifically designed to store three sets of criteria for good
regulation to Detect fit different occasions and special chemicals.
Equipped with remote control, More convenient and easy to operate.
(10) with continuous job performance, can not escape detection at
any time. Can automatically measure and display around the
Environment interference, and help to select the installation site.
(11) password-protected settings:only enter the correct password to
Non-operators can not change the security door parameter setting,
easy to manage.
(12) used in line with current international safety standards, the
use of weak magnetic field emission technology for pacemakers
revolver With persons, pregnant women, floppy disks, video tapes
and other sound.
(13)function of several detection doors work at same location at
same time ,
the minimum distance between each door must be more than 40
(1) standard: "GB 15210-2003.
Through-type metal detector door general technical conditions"
(2) detection procedures: 100 sensitivity adjustment may be
required on different occasions
to meet separately.
(3) basic safety: meeting the requirements of GB4793.
(4) personal safety: Satisfied NILECJ-0601.
(5) through rate: more than 60 persons / per minute.
(6) Power supply: 220V AC, 50/60Hz. (7) Power: 35VA.
(8) working environment: -10 ~ 45 , ≤ 95% RH.
(9) Overall dimension: 2220 mm (high) × 820 mm (width) × 630 mm
(10) Channel Size: 2000 mm (high) × 700 mm (width) × 560 mm (deep)