Add to Cart
SPECIFICATION:
l Model: LF7002
l Capacity: 1.7L
l Power:220-240V~ 50Hz 1850-2200W
l Materials:stainless steel
l Body thickness: 0.4mm
l Power cord:3*0.75mm²*75cm
l Certification:GS, CB, CE, ROHS, LFGB, ERP
More details:
Stainless steel body | SS #304 or SS#201 |
steam tube leading-in Steam | white PP |
cordless stainless steel electric kettle | 360° rotational |
Kettle body can be rotated | |
Controller type | STRIX U1855 controller |
STRIX P72C4 connector; | |
Leifan KSD-368B controller+ | |
Leifan KSD-368-2. | |
SS concealed heating element | Yes |
Automatically cut-off power after boiling | Yes |
over-heat protection | |
With indicator light on Switch when working | Yes, blue LED light |
Cord storage | Yes |
Filter on spout | No |
Power cord length: 0.75m +0/-50mm | Yes |
Water level on inside body | Yes, Max./Min. |
Water window | No |
Anti-slip feet design | No |
Product Picture:
Structures of electric kettle is very simple, you can refer to below description.
Our electric kettle LF1005 can be done many color painting on its housing according to your requirement. Different colors can satisfy different requirement in markets.
What colors we have done are Red, Blue, Pink, Champagne, Grey and Black.
The surface can be mirror finished or matted finished.
Some photos of cordless electric kettle for your reference as below.
The circuit diagram
Packaging
Some packing picture of our electric kettle for your reference
description | Materials/size |
Rating lable | Black words with silver back ground, words can’t be removed by water or alcohol. |
Instruction manual | 105G coated paper, A5 size, black-white printing |
Giftbox | 3-ply board and four color printing |
Cartonbox | 5-ply kraft board and black printing |
LOADING QTY:
GB size: 210X170X240MM
Carton size: 525X225X495MM (6PCS/CTN)
Container size | Loading QTY (6PCS/CTN) |
20ft | 3144pcs |
40ft | 6420pcs |
40HQ | 7212PCS |
Factory Profile:
We have two factories.
l Leifan Electrical Appliances Co.,Ltd
Leifan Electrical Appliances Co.,Ltd (Leifan) was established in 2008, located in Ronggui, Shunde District, Foshan City, Guangdong Province,China. Shunde district is the heart of Home Appliances production both in China and The World.
Below is our kettle manufacturing factory review
Factory Size | 6,600 M2 |
Manpower | 120 people |
Production Line Qty | 2 production lines |
Production Capacity | 80K-100Kpcs/month |
Main Product | Electric kettle |
Leifan mainly do the assemble line, so finished kettle is manufactured here.
Our product line include stainless steel electric kettle, double walls electric kettle and glass kettle.
Certification:
We are ISO9001:2008 certified company, all our products are CCC/CE/CB/GS/ROHS/LFGB/ERP approved. Leifan focus on product quality improvements, technology innovation, it has been rapidly growing in the past years with the purpose of that customer satisfactory and it will endeavor to meet the customer needs to the utmost extent in order to win customer contentment and trust.
We are ISO9001:2008 certified company
All our products are CCC/CE/CB/GS/ROHS/LFGB/ERP approved
UL/ETL can be applied once order quantity reach 50K
l Wenzhou Leifan Technology Co., Ltd.
"Leifan" is our own core independent brand of Chinese Controller whose factory is in Zhejiang Province. Now it is also our kettle brand.
Our controllers include double-metal waterproof controller, double-metal non-water-tight controller, single-metal non-water-tight controller etd.
Our controllers also can be into European country such as Germany, Belgium, Italy etc.
We can easily control the quality if use our own controller, and it also can have a competitive price.
Good Service from LeiFAN:
Sample policy: free sample s can be available within 5-7 days, but freight should be on receiver’s account.
Payment term: TT 30% deposit, balance against BL copy or LC at sight. We will arrange prepare materials after receive the deposit or LC, and can arrange inspection within 20days after confirmed all the artworks.
Loading: FCL or LCL are accepted, but LCL will add some cost as actual.
Loading port: port in SHUNDE
Discount: we offer discount for big quantity
Warranty: one years warranty from shipping date
Quality Control process:
l The first people on the production line will check the kettle body, if have serious scratches, he will select it and put it on the defective area, then return back to supplier.
l Silk printing: silk print one by one and check it if OK then put the silk on the high temperature to make it fixed to the kettle more indelibly.
l Function test position: once the kettle finished assemble, we will arrange test kettle if can function well by boiling water one by one. Only those function well can run to next position.
l Power consumption test, Hit-pot test and Ground test: all the function well kettle will do the hit-pot test and Ground test, and then check if the power consumption can consistent with the rating lable.
l Clean: wear gloves and wipe out the dirty inside and outside, the dirty can’t be removed will be selected out and place it in the defective area.
l Outlook check and assemble check: before packed in to PE bag and giftbox, we have arranged a QC to check the outlook to avoid the dirty one and bad assemble one packed into the giftbox and run into the market.
l Regularly check: Line QC will select a lot of samples on the line or in the packed carton box and take to inspection room to do the full check, to find if any defectives in the samples. If any, to calculate the defective rate to see if in the AQL and if can accept. If not, should inform the engineer to find the way to solve it.
Internal Checking/Inspection:
1. All plastic parts shall be bright and free of defects such as impurity, sharp edge, flow mark, shrinkage, missing, flash, scratch and whitening etc.
2. The unit colors must be consistent or per the sample or customer’s requirement. (in 0.5m natural ray)
3. The heating plate shall be high grind-finished and free of scratch and rust etc.
4. Mating surface shall maintain consistency of fit along adjoining surfaces and free of looseness and deformation. For the length of fit, gap shall be less than 0.8mm, warpage shall be less than 1.0mm, and displacement shall be less than 0.7mm.
5. All printings shall be clear, legible, complete, secure and in place.
How to find us?
Website:
If you want to know more our other electric kettle information, please click below link.
http://kettle-leifan.gmc.globalmarket.com/
http://kettle-leifan.french.globalmarket.com/
http://kettle-leifan.german.globalmarket.com/
http://kettle-leifan.portuguese.globalmarket.com/
http://kettle-leifan.arabic.globalmarket.com/
http://kettle-leifan.korean.globalmarket.com/
http://kettle-leifan.japanese.globalmarket.com/
Thank you for your time!
If any query, please feel free to contact us as below name card.
Sales :
Bella
Direct line: 86-757-2361 9655
Fax: 86-757-22900927
MSN:bella@fsleifan.com
Skype:bella.xiong1
Email: bella@fsleifan.com
Sales 1: | Sales 2: |
Phoebe (Marketing Manager) | Bella |
FAQ:
1. Are your factory or trading company?
A: We are factory specialized in electric kettle from 2010, located in SHUNDE, FOSHAN, CHINA.
2. Were is your main market?
A: European market such as Germany, France, Italy, Poland and Russia; Belgium, Middle east market such as Dubai, Iraq and Iran.
3. What controller your kettle used?
A: Both strix or Chinese controller those get GS, CE approval. Generally we use Chinese LEIFAN controller as we manufacturing it by ourself, it can have competitive price and good quality control for it. But if Strix required, we can use it with upcost USD2.5.
4. Do Leifan controller get certificate? How long your Leifan controller can be used?
A: Yes, our LEIFAN controller get GS, CE approval from TUV, and it can be used for 10000 times
5. Have the kettle been with CB, CE certs?
A: Yes, all our kettle in market are with GS, CE, CB, ROHS, LFGB and ERP approval.
6. Have your kettle been with ETL or UL?
A: At this moment we have not, if have orders that need ETL or UL, and quantity is reach 50K, we will apply them
7. How long for your delivery date?
A: 30-40 days. Generally, we can finish the order within 30 days after we receive the deposit and confirmed the all artwork.
8. Can we ask for samples for test? And send the sample to our overseas office?
A: Of course we can provide free sample for test, but with freight
collected. We can deduct the freight once the order confirmed
9. If Chinese controller can sell to European country without
patent issue?
A: Yes, of course, some of customer in Germany, Italy, Belgium can
accept for the Chinese controller.
10. Who is the biggest customer in European Market?
A: Sarcona AG from Germany
Click below picture then can enter into the home page of our website