Thank you for purchasing KINCARP Multifunctional bait boat!
Before you use it, please take a few moments to read this
instruction. That’s helpful for your future use.
It is our great pleasure to have you as our dear customer. Editing
this instruction with our efforts is to support you to master the
using way of KINCARP bait boat. You will be fully aware of the
knowledge about this bait boat, such like technical specification,
operation, using way and maintenance etc. Our company will not
afford any cost or responsibility because of your wrong operation.
This instruction is just for related model of KINCARP
multifunctional bait boat.
Page 7 in this instruction is additional notes for your high
Please check the actual product and accessories based on Pack
Contents” in Page 2. If appear any missing issues, please contact
with local dealer on time.
Our company keeps the explanation rights for upgrading improvements
Due to limited space in this instruction, please check more
information via www.kincarp.com.
Please fill in Customer Card” in Page 11, to enjoy the nice
after-sales service about KINCARP” series products. Send it to us
by express or fax for our safe keep and further service track.
The detailed contact information are shown in Page 10 of this
Thank you again for your great cooperation and support!
2. KINCARP Bait Boat Pack Contents
All bait boats come as standard with the following:
1. Bait boat V11PC
2. 6 channel remote control handset1PC
3. 12V10AH lead-acid battery (including connecting wires)1PC
4. 1.2V 1500mAh Ni-MH rechargeable battery for handset8PCS
5. 14V 1.5A home charger for bait boat (including converting
6. 14V 0.5A home charger for handset1PC
7. Rubber antenna for bait boat 1PC
8. Antenna for remote control handset 1PC
9. Custom backpack for bait boat 1PC
10. Custom carry bag for accessories 1PC
11. User Guide 1PC
12. Product Video CD 1PC
13. Protecting foam for bait boat 1SET
14. Outside carton box1PC
3. Technical Specification
1. Product Name：KINCARP”Multifunctional Bait Boat
3. Product Model：V1
4. Pack Measurement (L*W*H)： 770mm*585mm*290mm
5. Product Dimension (L*W*H)：680mm*490mm*250mm
6. Product Gross Weight：12.5KG
7. Product Net Weight (including batteries)：11KG
8. Product Outfit：2 independent hoppers,2 independent hooks
9. Maximum Bait Capacity：4KG
10. Running Speed: 80meter/minute without weed guard,
50meter/minute with weed guard (depend on weather and environmental
11. Electrical System: DC 12V
12. Range: 500-1000meters (depend on weather and environmental
13. Radio Handset: 2 times inverter frequency, 8 channel receiver;
6 channel transmitter,40Mhz
14. Propulsion: 2 independent motor
15. BatteriesLead-acid 12V 10AH/20HR for bait boat
Ni-MH AA 1500mAh 1.2V for handset
16. Running time (at max speed): 2+ hours (depend on actual using
habit and working status)
17. Charger Voltage: AC 110V-240V
1．Open the battery lid at middle of boat body. Place lead-acid
battery into boat. Connect the connector for fixing battery and
close the battery lid.
2. Connect the antenna for boat and antenna for remote control
handset well. The antenna for boat is rubber, the sectionalized
antenna for handset is metal.
3. Place 8 Ni-MH AA batteries in the compartment on the back of the
remote control and close the lid. Turn on the power of remote
control after understand the operations.
The operating points about remote control (see below picture).
A. Motor Trim: Balance the two motors’ speed and keep the boat goes
Please make the motor trim’s indicator at middle position during
whole using process.
B. Lights’ indicator: The red light is on under normal working
status. The light will flash and have buzzer sound when battery of
remote control needs charging. The buzzer sound will be more when
the battery capacity is used up.
C/F. Trim switch: Control the bait hoppers door and flexibility of
hook by adjust the two slipping switches. P