Brief introductionIt is aone kind of pure polyester powder for
building industry., with excellent Resistance to elements, heat and
corrosion. It can be used in outdoor condition and can keep color
and luster for long time. It can meet national standard and
Property1.SG; 1.3～1.6g/cm3 2.Moisture; ≤0.5% 3.Force distribution; D(V0.5) 40±5m,
Packing and storageNet wt. is 20kg , the valid period is 12 months under 30℃. Stored
in dry, clean and airiness place, far waway from fir e & heat,
Do not expose in the air. After use, the packing should be sealed
Uses 1 ; corona electrootatic painting, electrostatic fluidized bed,
2. Thickness ; 50～100m
Baking conditionLow temp. :165℃@20min, normal temp. 185℃@15min
Fast curing temp. 195℃@10min, Fast curing in high temp. 210℃@20min
Appearance: LusterGB/T9754-88, 60° ; High gloss >80%, Semi-gloss 40%～80%, blur <40%, Other special patterns
Color see BAIJ color card or following your demand
Mechanical propertyTest board, tinplate or luminum sheet, Thickness50～75m, In lab condition.
Pencil hardnessGB/T6739-96; H-2H, Adhesion(check)GB/T9286-98; 0
grade , cupping testGB9753; 7mm, bending testGB/T6742; 2mm, impact test GB/T1732; 5kg*cm, impress testGB/T9275;
Resistance to heat 150℃ for 24hr, color differenceE≤1.5
Resistance to corrosion G8/T1765-79 or following your demand, Thickness100～120m, In lab condition.
Salt fog test( 8)GB/T10125-1999; 1000hr , no change, the corrosion
on profile < 2mm
Resistance to wetheat GB/T1704-79(89); 1000hr , no change.
Resistance to boiling water GB/5237.4-2000, no foam, wrinkle , rust
& remove, film change≤1 grade