High Performance CNC Plasma Cutting Machine With Hypertherm CE Approved
Brand Name:JINAN QUALITY CNC
Certification:CE CO
Model Number:QCP1325
Minimum Order Quantity:1 set
Payment Terms:Western Union, L/C, T/T
Place of Origin:Jinan, China (Mainland)
Contact Now
Add to Cart
Site Member
Address:
470, Building 3 , Zhongrun Century Center, NO 12111 Jingshi Road , LiXia District, Ji'nan, Shandong, China (Mainland)
Supplier`s last login times:
within 38 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
Cnc Desk Plasma Cutting Machine For Cutting Metals With Hypertherm
Descriptions of Cnc Desk Plasma Cutting Machine For Cutting Metals With Hypertherm
QCP CNC Plasma cutting or CNC flame cutting machine is a new type of thermal cutting equipment. It works by using a plasma arc (with compressed air) or a high-temperature high-speed flame (with oxygen + acetylene or propane) as a heat source to partially melt and cut metal simultaneously, then blow away the molten metal with a high-speed air stream so as to form a narrow slit. The machines not only have high cutting speed, narrow slit, flat cut, small heat affected zone, low deformation of the processing metal, simple operation, but also with remarkable energy saving and material saving effect.
1. QCP plasma cutting machines adopt high-quality cast steel to
build gantry to make sure of rigidity and light weight structure,so
the machines can move more stable ,more smoothly and more precisely
with less movement inertia, also prolong the lifespan of the motors
greatly.
2. X and Y axis adopt Taiwan-imported Hiwin linear square rail and
siding blocks,and Y axis is driven by dual-big-torque 86 motors ,
which make the machines moving more smoothly and precisely.
3. Professional STARFIRE controllor system as standard
configuration:
1). STARFIRE system is designed to cut metals with plasma and torch 2 kinds of cutting-mode;
2). High reliability as well as good resistance to plasma
disturbance, lightning and surge;
3). Applied torch/plasma cutting technology, able to perform corner
speed control and height control automatically;
4). Kerf compensation, reasonability check and simulating
operating;
5). Breakpoint restoration, automatic power-back recovery and
automatic breakpoint memory if electrical powering break;
6). Random section and piercing point selection;
7). Extended piercing for thick plate and bridging feature for thin
plate;
8). Optional piercing position feature in mode of RETURN,
SECTION(return,section) and RESBREK(breakpoint restoration), very
convenient for user control;
9). Ready for transitional cutting operation at any moment;
10). Special short line machining feature based on smooth travel,
extensively applicable to metal blanking as well as advertisement
and ironwork fabrication, etc;
11). 24-type-part patterns in LIBRARY including the common machining parts , extensible and customizable and with auto-nesting function;
12). Compatible with many professional nesting softwares such as
IBE(Germany), FASTCAM, etc;
13). Interface language can support
English,Russian,Spanish,French,Czech,Japanese and Slovankian,also
it can be customized to other language;
14). 7" colour-screen with dynamic graphic display, 8-times zoom,
free point automatic tracking;
15). Using U disk read,edit ,operate the file and upgrading the
controlling-software easily.
4. Professional THC can adjust plasma-cutting torch up and down
automatically to keep fixed distance with the metal plate ,so the plasma torch can cut unflat metal plate safely and
quickly.The working way of THC is based on the characteristics of
constant current of plasma power generator and checking the arc
voltage of plasma power generator to control the torch height
momentarily.
5. Plasma torch can cut the 0.1-30mm metal sheet with plasma power
generator. (The exact cutting thickness depends on plasma power
generator, please see the Cutting Thickness in the following.)
Flame torch can cut the 5-200mm metal sheet ( cutting speed
0--1000mm/min ) with oxygen + Propane or acetylene. (There is no
plasma power generator for flame cutting.) Flame cutting torch is
optional.
Applications of Cnc Desk Plasma Cutting Machine For Cutting Metals With Hypertherm
QCP plasma cutting machines are widely used to cut iron sheet,aluminium / brass / copper / titanium / nickel sheet,galvanized sheet,stainless steel plates,carben steel plates,wild steel, alloy steel and almost all metal plate and pipes (needs rotary device for pipes-cutting)with fast working speed, high precision and low cost.
Machine technical parameters of Cnc Desk Plasma Cutting Machine For Cutting Metals With Hypertherm
| I. Basic Configuration Technical Parameters | |||||||||
| Machine dimension & weight | 2200mm×3300mm×1560mm 1100KG | ||||||||
| Effective cutting size | 1300mm×2500mm | ||||||||
| Plasma cutting torch | 1 set (flame torch as for optional) | ||||||||
| Plasma cutting thickness | according to plasma generator | ||||||||
| The cutting torch height | ≤170mm | ||||||||
| Cutting speed | 0-8000mm/min depends on metal thickness,arc set on THC,current set on plasma generator) | ||||||||
| Travelling speed | 0-10000mm/min | ||||||||
| II. Critical Parts List | |||||||||
| Name | brand & specifications | set | |||||||
| Plasma machine frame | heavy duty frame with 4.5mm thickness | 1 | |||||||
| Controlling system | Starfire SF-2012AH-QG or SF-2100C-QG (7 inch diplay screen) | 1 | |||||||
| Arc Voltage Plasma Torch Height Controller | Start Microstep SH AHA-L1 | 1 | |||||||
| Motor & driver | Japanese SERVO YASKAWA 400W | 3 | |||||||
| Rail | Taiwan Hiwin NO 20 square linear rails | 4 | |||||||
| Rack | Longitudinal 7 precision rack | ||||||||
| Switches & contactors | Schneider | ||||||||
| High strength bearing | Japanese NSK | ||||||||
| Anti-collision device | JINAN QUALITY CNC | 1 | |||||||
| Independent control cabinet | JINAN QUALITY CNC | 1 | |||||||
| Automatic programming and nesting software | Australian FastCAM software | 1 | |||||||
| Warranty time | 3 years (replace parts during warranty for no human reasons) | ||||||||
| III. Machine Frame | |||||||||
| 1.The beam adopts the German messel technology and the desktop frame to better eliminate the structure of torsional moment. The gangtry is a cast-steel structure, so that it will not be deformed in long-term use. | |||||||||
| 2.The mechanical transmission system all USES the precision rolling bearing and the processing precision is the national standard 7 class precision gear and the rack meshing. | |||||||||
| 3.The automatic compensation gap device is added in the transverse and longitudinal gear transmission structure, so that the transmission structure can accurately execute the instructions from the numerical control system. | |||||||||
| 4.Active end beam: longitudinal track adopts linear slide rail to make it run smoothly in two tracks. | |||||||||
| 5.All parts and components of the machines are treated with blackening, electroplating and other surface treatments. | |||||||||
| 6.The whole machine is sprayed primer after sandblasting, surface paint using orange paint, the color of red and black. | |||||||||
| IV. Mechanical Accuracy | |||||||||
| Linear positioning accuracy | ±0.1mm/10m | Linear repetition accuracy | ±0.4mm/10m | ||||||
| Cutting torch stroke accuracy | ≤100mm | Cutting speed accuracy | ±5% speed set | ||||||
| Cutting torch automatic lifting precision | ±0.5mm | ||||||||
| Side length error (four sides) | 0.5mm | Diagonal deviation | 0.5mm | ||||||
| Return to origin deviation | 0.3mm | Intersection point deviation | 0.5mm | ||||||
| Diagonal straightness | 0.5mm | 2-direction Line deviation | 0.2mm | ||||||
| Positioning accuracy of the whole machine | 0.1mm | ||||||||
| V. Work Environment | |||||||||
| Input voltage | 220/380V±10% 50Hz±1% plasma generator: 380V±10%; control cabinet: 220V±10% | ||||||||
| Input power | 5000W | ||||||||
| Ambient temperature | 0 to 40 ℃ | Relative humidity | 95% (non-condensation) | ||||||
Machine Photos and Parts of Cnc Desk Plasma Cutting Machine For Cutting Metals With Hypertherm
Cutting thickness of Cnc Desk Plasma Cutting Machine For Cutting Metals With Hypertherm
| Chinese HuaYuan Brand | |||||
| Hua Yuan 63A | < 5mm | ||||
| Hua Yuan100A | <carben steel 12mm,stainless steel 6mm | ||||
| HuaYuan120A | <carben steel 18mm,stainless steel 10mm | ||||
| HuaYuan160A | <carben steel 25mm,stainless steel 15mm | ||||
| HuaYuan200A | <carben steel / aluminium 30mm,stainless steel 20mm | ||||
| USA Hypertherm Brand | |||||
| Hypertherm45A | <carben steel 8 mm,stainless steel 5mm | ||||
| Hypertherm65A | <carben steel 12mm,stainless steel 8mm | ||||
| Hypertherm85A | <carben steel 16mm,stainless steel 12mm | ||||
| Hypertherm105A | <carben steel 20mm,stainless steel 14mm | ||||
| Hypertherm125A | <carben steel 25mm,stainless steel 16mm | ||||
| Hypertherm 200A | <carben steel 32mm,stainless steel 22mm | ||||
Our service of Cnc Desk Plasma Cutting Machine For Cutting Metals With Hypertherm
1. The company who initially provide 3 years warranty in the world;
2. 24-hour full after sales service;
3. All finished machines we delivered are 100% strictly tested by our QC department and engineering department and sending working zamples together with machines;
4. OEM Service Customized and OEM orders are welcome due to our abundant experiences. All the OEM services are free.
5. Standard Package List as below:
| QCP 1325 plasma cutting machine | 1 SET | ||||||||
| Plasma generator according to your need | 1 SET | ||||||||
| Nozzles and electrodes | Hypertherm: 2 sets (HuaYuan :10 sets) | ||||||||
| Smoke-ventilator | 1 SET | ||||||||
| Foot-pads | 6 SETS | ||||||||
| Australian FastCAM software with dongle | 1 SET | ||||||||
| Proximity limit (as spare part) | 1 PIC | ||||||||
| Allen wrenches | 1 SET | ||||||||
| U DISK (operating manual and videos) | 1 PIC | ||||||||
| Cutting zample | 1 PIC (as your requirements) |
About us
Q1: How about warranty?
A1: 36-months quality guaranty, the machine with main parts(excluding the consumables) shall be changed free of charge when if any problem during the warranty period.After 36-months warranty, we ll offer all the parts with the agent price.
We offer lifetime technical supports, afterservice person in charge :Skype / whatsapp/ Wechat/ Tel: +8613176441785 Carol zhu.
Q2: What's the delivery time?
A2: 10-15 working days to delivery port.
Q3: What's the usually delivery terms?
A3: FOB, CIF, DDP, Exworks will be OK.
Q4: What's the MOQ?
A4: 1 set.
Q5: What's the delivery port?
A5: Usually Qingdao port, also we can deliver machines to Shanghai port and Guangzhou.
Q6: What's the packing?
A6: Iron Pallet and export- standard Plywood cases .
Q7: Can I change the motor to my local voltage and frequency, Is there any extra charge?
A7: Yes, we can supply motor ,all parts and components with your local frequency and voltage, such as 220V/380V/410V/415V/440V, and 50HZ/60HZ with no-profit charge.
Q8: Can you place OEM orders?
A8: Yes,OEM orders are acceptable. We can manufacture machines according to your requirement with your design,logo,color,materials or brand information.
Q9:Where is your factory located? How can I visit there?
A9:Our factory is located in JiNan City, Shandong Province, China, about 2 hours from Beijing, 3.5 hours from Shanghai and 10 hours from Guangzhou by high-speed train.
High Performance CNC Plasma Cutting Machine With Hypertherm CE Approved
Inquiry Cart
0