PIR and Microwave Dual-tech Outdoor PIR Motion Detector XC-1XT
Waterproof Infrared Motion Detector Introduction
XC-1XT is a digital PIR+MW with remarkable functions, it can avoid
outdoor interference from sunshine,UV & RF, head light on car
etc and is highly effective for water/dust/insects/ wind proof. It
is matched with follow advanced technology: direct calculation and
analysis technology from intelligent high-speed microchip to
intrusion infrared signal, double polarity test technology,
automatic temperature compensation technology, direct adjustment
technology to sensitivity on digital signal, filtering technology
from multi-layer infrared channels to mixed light. Its particular
calculation on pets chargeable data can avoid false alarm caused by
20kg small animals effectively. At the same time, it is also
outstanding in anti hot air, waving curtains etc, can offer forced
test on the base of 2-grade sensitivities.. In a word, this
detector is advanced and stable enough to offer best security
Protection indoor and outdoor with its IP65 water proof structure
Item | Specification |
Model | XC-1XT Waterproof Infrared Motion Detector |
Detection Range | 40ftx56ft (12m×17m) |
Supply Voltage | 9.5 ~ 16V DC |
Current Draw | Max. 35mA at 12V DC |
Detection Method | Passive Infrared + Microwave |
Infrared Detection | Dual-Element |
PIR Sensitivity Adjustment | 60%/80%/100%/120%, selectable |
Infrared Pulse Count | 2 or 4, Selectable |
Microwave Detection | MIC Module (10.525GHz) |
Microwave Pulse Count | 2 Pulses |
Warm-up Time | 50±15S |
Alarm Output | N.C./N.O. 30V DC, 0.35A Max. |
Alarm Period | 2±0.4S |
Alarm Indicator | Red LED (On/Off Selectable) |
PIR Detection Indicator | Green LED Flashes |
Microwave Detection Indicator | Yellow LED Flashes |
Alarm Memory Indicator | Red LED Monitor (On/Off Selectable ) |
Tamper Switch | N.C. , Open when cover is removed. 30VDC, 0.5A Max. |
Operating Environment | -26℃ ~ +50℃, Rh.95% Max. |
Dimensions | 160mm × 70mm × 43.9mm |
Weight | 180g |
Waterproof Infrared Motion Detector Features
- Pet immunity ;
- Selectable single-infrared detection function;
- Green, Red, Yellow LED indicator;
- Microprocessor chip design;
- Alarm output N.O./N.C. selectable;
- Ingress protection of IP65, all-round rubber seal ring, effectively
prote- cting against rain, mist and insect.
How to Install XC-1XT
1. XC-1XT optimum installation height: 2.0m-2.2m
2. How to adjust bracket angle when installation is too high.
3. The detection distance will become short when angle is adjust too
much. (even mounting height >2.2m)
4. Optimal way of detection: to let the object enter the detection
area by the way of transverses as following picture.
5. For these objects in the direction of motion, you may encounter
shorter detection ranges
6. LED light
Green: PIR is sensing the target.
Yellow: MW PIR is sensing the target.
RED: Send out the alarm signal(Both PIR & MW is sensing the
target.
7. How to adjust MW range
Remove back cover and find the “MW RANGE ADJUSTMENT”.
Turn clockwise to Increased MW sensitivity.
Turn counterclockwise to reduce the MW sensitivity.
About US
International leading alarm security system, door magnetic
contacts, smart home security products, smart sanitary products
- The security products of AIN which are ALEPH brand receive the
honor of a&s Top 10 International brands for many years
- We are the sole supplier of Vanke Group for photo beam sensors and
our alarm security products have been widely used in the various
real estate projects and property areas
- We take 80% of orders of the large Japanese police companies
- Supply flow sensors to TOTO (smart toilet), NORITZ(gas water
heater) and other customers
- Research and develop the Smart Home Security System AHS-4000 Series
with Thailand Police Department
- Cooperating with the Tokyo City Government to develop Luna Nurse
sensors
- Cooperating with Kyushu Institute of Technology to develop
automatic driving technology